WIKE BOX BIKE Assembly Manual
Tools needed to assemble Bike:
-High table or Stand
-Set of Allen/Hex wrenches
-Cable cutters
-12mm & 15mm wrenches
-Grease
Thank you for purchasing a WIKE BOX BIKE!
Contents
Safety……………………..…………………………..….3
Front wheel…………………………………………….4
Kickstand………………………………………………..5
Handle Bar & Box……………………………………6
Seat post and Saddle………………………………7
Final pre-ride check…………………………………8
2
1. Handle bar & brake
lever
2. Gear shift
3. Brake lever
4. Box
5. Corner iron
6. Front light
7. Front wheel
8. Front brake
9. Fork
10. Turning rod
11. Kickstand
12. Frame
13. Chain cover and chain
14. Chain wheel and crank
15. Pedal
16. Rear wheel
17. Rear fender
18. Rear reflector
19. Seat post lock
20. Seat post
21. Saddle
22. Rubber band
23. Carrier
24. Front fender
3
Safety
Before you ride your bike for the first time, familiarize yourself with the
location and operation of both brakes and steeling attributes
Always check to make sure that all nuts are secured each time before
you ride in order to make sure the box is stable
Make sure the seat post bolt is securely fastened and that the seat post
does not slip before you ride
Never operate the bicycle if the frame, wheels or quick releases are
damaged
Proper maintenance and adjustment of the box bicycle will greatly
increase riding safety and performance
Always check your tires for proper inflation (25-40psi) that is indicated
on the tire’s sidewall
Reflectors alone are not adequate for riding at night. Front and rear
lighting systems are recommended to increase visibility
Always wear a helmet when riding the bicycle
The bicycle is designed for users of all sizes. However box bikes should
not be operated by children and young adults
Remember to comply with all bicycle safety laws and use common sense
especially in adverse weather condition
Wike takes no responsibility for accidents resulting from failure to
comply with all bicycle safety laws, careless driving or improper
maintenance of your box bicycle
Loading...