
Wiha T-handle.
The classic for high torques.
The ergonomic design of the Wiha
T-handlethat fits comfortably into
the hand ensures optimum,
symmetrical torque transmission
from the hand through the blade to
the screw. The extruded, angled end
of the blade ensures that, even at the
highest torques, the blade does not
slip but gains a secure hold when
either tightening or loosening the
screw. As the blades are subjected to
high stresses, Wiha uses exclusively
high-quality chrome-vanadium steels
that are first subjected to a complex
hardening procedure before being
used in the wearresistantblades.
A wide range of hex (metric and
inch sizes), TORX®and TORX PLUS
blades, as well as hex drivers
(metric and inch), ensures that
the perfect tool is at hand for all
conceivableapplications.
A colour-coding system for the
handles facilitates the selection
of the right blade.
Red handle:
metric hex blades
Yellow handle:
inch hex blades
Green handle:
®
TORX
blades
Light green handle:
TORX PLUS
Thanks to the clear colour-coding system,
you’re sure to select the appropriate blade.
®
®
blades
The handle design is such that
the complete handle surface
can be used, thus enabling
optimum power transmission.
Wiha T-handle.
High torque transmission
•
thanks toergonomic handle
Through hardened blades
•
made of chrome-vanadium
steel withstand every stress
The angled blade end is
•
injection-moulded into the
T-handleand non detachable
Hanging hole for workshop
•
storage
Made of high-quality plastic
•
102