Wiha Tools Screwdrivers User Manual

EN_s008-071_SD_2012 14.02.12 18:44 Seite 8

Wiha screwdrivers.

Wiha makes it possible: Optimum fitting for perfect work.

Drive

SoftFinish screwdrivers

Screw-holding screwdrivers

SoftFinish

SoftFinish Stubby-screwdrivers

MicroFinish screwdrivers

Classic screwdrivers

Wooden handle screwdrivers

PicoFinish screwdrivers

Small screwdrivers

SoftFinish screwdriver

Classic electric screwdriver

with mm scale

electricslimFix

electricslimVario

electric

Voltage testers

Slotted Phillips PHXeno PH PozidrivPZXeno

20-211420-21

20-23

SL/PZ

TORX

16-17 22-23

TORX

Tamp er

esistant

TORX PLUS

For internal

hex

screws

15 17/23 18 19/23

For hex

nuts

For internal

square screws

13 14

15 15 15

16 16 16

25/27 25/27 26/27 26 26

29/30 29/30 29/30 29 30 30

33 33 33

38-393538-39

38-39

36 37/39 37/39

42 42

49-51 49-51 49-50 49-51 49-50 49/51 49

53-56 53-56 53

53-54

53-56 53/56 53

57/59 58-59 61 58-59 61 58 58 58-59 58

62 62

For internal

triangular

screws

Slotted

nuts

SoftFinish screwdriver

SoftFinish Stubby-screwdrivers

ESD

Precision ESD

Ceram ic

65-66 65-66 65 66

65 65 65

68/70 68/70 68 69/70 69 68/70 68/70

71 71

EN_s008-071_SD_2012 14.02.12 18:44 Seite 9

www.wiha.com

Screwdriver range

The Wiha Finish screwdriver concept.

The revolution in screwdriver design.

................................................................................................

Wiha SoftFinish®.

The specialist for dry and general applications.

– Wiha SoftFinish®Scala

............................................................................................................

– Wiha SoftFinish®Stubby-Schraubendreher

Wiha MicroFinish.

he specialist for wet and oily applications.

Wiha Classic.

The robust screwdriver for multiple applications.

Wiha wooden handle.

The all-rounder for woodworking applications.

Wiha PicoFinish.

The comfortable precision screwdriver.

Wiha Universal scraper.

Easily removes sealing, paint and glue.

Wiha special tools.

– Universal scraper, trim pin remover. – Square reamer, awl. – Small screwdrivers. – Magnetisers. – Screw extractor.

..................................................................................................................

...................................................................................................................

....................................................................................................................................

............................................................................................................................

............................................................

........................................................

.....................................................................

.......................................................

..............................................................

.................................................................................

...............................................................................

.........................................................................

10 – 11

12 – 23 15 16

24 – 27

28 – 30

32 – 33

34 – 39

40 – 41

31 31 42 42 43

Wiha VDE screwdrivers.

For safety and quality.

– Wiha slim-Family – Wiha slim Selection Set

.........................................................................................................................

........................................................................................................

Wiha SoftFinish®electric slimFix.

The safe and comfortable insulated VDE screwdriver.

Wiha SoftFinish®electric slimVario.

Maximum safety at minimum size.

.............................................................................................

Wiha SoftFinish®electric.

The safe and comfortable insulated VDE screwdriver.

– Wiha Xeno. For terminal screws.

Wiha Classic electric.

Single-pole voltage tester.

.............................................................................................................................

................................................................................................................

...................................................................................

Wiha ESD screwdriver.

For use on electrostatically sensitive components.

Wiha SoftFinish®ESD.

Wiha SoftFinish®ESD screwdriver Stubby.

............................................................................................................................

.........................................................................

Wiha Precision ESD.

The static dissipative precision screwdriver.

Wiha Ceramic.

The non-static adjustment tool for clean rooms.

.............................................

....................................................................

..........................................................

44 – 45 46 – 47

48 – 51

52 – 56

57 – 59 60 – 61

64 – 65 65

67 – 70

EN_s008-071_SD_2012 14.02.12 18:44 Seite 10

The Wiha Finish screwdriver concept.

The revolution in screwdriver design.

Wiha SoftFinish

Wiha MicroFinish

Introducing the next generation of screwdrivers from Wiha: the SoftFinish®and the MicroFinish, because functionality and ergonomic

styling together make up the most important aspect of a screwdriver.

The generation of Wiha Finish handles

with its total of four handle sizes was extensive gonomics with high-profile research institutes. The result is a completely ergonomic design and optimal handle lengths and diameters. The user is guaranteed a perfect hold with every handle size.

The feel good factor

Due to the combination of material and handle size, each Finish screwdriver fits perfectly into the palm of the hand. There is no strain on muscles, ligaments and joints, with the result that minimum force is required for maximum torque.

developed on the basis of

studies into handle er-

the support of

SoftFinish®or MicroFinish

Screwdrivers used in dry working environments have to have a different handle surface to those used in oily working environments. Wiha has taken this on board and has developed a Finish screwdriver for dry and general applications and one for oily applications.

The handle core of both models consists of impact-resistant, recyclable special plastic material. The torque strengthening Finish zone of the SoftFinish®version is made of a soft, thermoplastic elastomer and is ideal for dry and general applications.

The Finish zone of the MicroFinish version is made of impact-resistant cellulose acetate that is also resist-

to oil and chemicals.

ant Its micro-fine ensures convincing transmission without slipping, even with oily hands.

surface structure

high-torque

EN_s008-071_SD_2012 14.02.12 18:44 Seite 11

Solid moulded core made of high-impact plastic material

Large optimised handle diameter allows higher torque with less user hand fatigue.

www.wiha.com

Roll-off protection

Blade made of high quality chromevanadium-molybdenium steel, super hardened and chromeplated for unmatched durability

Reinforced connection between blade and moulded core

Zone

SoftFinish for unbeatable comfort and maximum torque

Round, smooth handle end

EN_s008-071_SD_2012 14.02.12 18:44 Seite 12

Wiha SoftFinish®.

The specialist for dry and general applications.

The Wiha SoftFinish

zone features a solid moulded core with soft outer grip. This requires less force, yet achieves 40% more torque than conventional handles. The handle is shaped to fit comfortably in the hand, providing maximum torque forces in dry and general working conditions.

If a stuck screw has to be loosened, a precise hammer blow can be applied to the solid steel cap. Due to the hex blade extending trough the handle to the steel cap, there is no loss of impact energy.

The solid steel cap at the end of the

SoftFinish hammer blows, for example, when loosening a tight screw.

Due to the solid steel cap and hex blade extending through the handle, there is no loss of impact energy when a precise hammer blow is applied.

Thermoplastic elastomer tolerates high loads touch.

Blade with hex bolster for wrenches to use on particularly tight screws.

handle enables controlled

and feels soft and pleasant to the

The right tool at a glance,

hanks to the printed screw symbol

t on the handle end.

Wiha SoftFinish®.

Multi-component SoftFinish

•

handle provides maximum user comfort

Ergonomically perfect

•

handle design

Printed screw symbol

•

on handle end for fast identification

Available in versions with

•

round blade, hex blade or hex blade with solid steel cap

Blade made of high quality

•

CVM-steel, through-hardened and chrome plated

Wiha ChromTop®-finish on tip

•

for a perfect fit every time

EN_s008-071_SD_2012 14.02.12 18:44 Seite 13

www.wiha.com

For slotted screws.

302

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN 5265, DIN ISO 2380. Application: Especially for dry and general applications.

Order-No. 00684 2.0• 65 0,4 2,0 169 23 10 00685 2.5 75 0,4 2,5 179 23 10 00686 3.0• 80 0,5 3,0 184 23 10 00687 3.0 100 0,5 3,0 204 23 10 00689 3.0• 150 0,5 3,0 254 23 10 00690 3.0• 200 0,5 3,0 304 23 10 32383 3.03000,5 3,0 404 23 5 00691 3.5 100 0,6 3,5 204 23 10 26931 3.5• 200 0,6 3,5 304 23 10 00692 4.0 100 0,8 4,0 211 30 10 00694 4.0• 150 0,8 4,0 261 30 10 00695 4.0• 200 0,8 4,0 311 30 10 00696 4.0• 300 0,8 4,0 411 30 5 27753 4.5• 80 0,8 4,5 191 30 10 00697 4.5• 125 0,8 4,5 236 30 10 00698 5.5 125 1,0 5,5 236 30 10 00700 5.51501,0 5,5 261 30 10 00701 5.5• 200 1,0 5,5 311 30 10 00702 5.5• 300 1,0 5,5 411 30 5 32384 6.0 300 1,0 6,0 418 36 5

• Additional dimension. Non-DIN size.

302

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN 5265, DIN ISO 2380. Application: Especially for dry and general applications.

SoftFinish®slotted cabinet screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

SoftFinish®slotted workshop screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

For slotted screws.

308

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN 5265, DIN ISO 2380. Application: Especially for dry and general applications.

Order-No. 00731 3.5750,6 4,0 - 186 30 10 00732 4.5• 90 0,8 4,0 - 201 30 10 00733 5.5 100 1,0 5,0 8 213 36 10 00734 6.5 125 1,2 6,0 10 238 36 10 00735 7.0• 125 1,1 6,0 10 238 36 10 00736 8.0 150 1,2 8,0 13 268 41 10 00737 9.0• 150 1,4 8,0 13 268 41 10 00738 10.0 175 1,6 8,0 13 293 41 5 00739 12.0 200 2,0 10,0 16 318 41 5 00740 14.0 250 2,5 10,0 16 368 41 5

• Additional dimension. Non-DIN size.

530

Hex blade with hex bolster, solid steel cap.

Order-No. 03223 3.5750,6 4,0 - 186 30 10 03224 4.5• 90 0,8 4,0 - 201 30 10 03225 5.5 100 1,0 5,0 8 213 36 10 03226 6.5 125 1,2 6,0 10 238 36 10 03228 8.0 150 1,2 8,0 13 271 41 5 03230 10.0 175 1,6 8,0 13 296 41 5 03231 12.0 200 2,0 10,0 16 321 41 5 03232 14.0 250 2,5 10,0 16 371 41 5

• Additional dimension. Non-DIN size.

SoftFinish®slotted screwdriver. Hex blade with hex bolster.

chrome-plated. Wiha ChromTop

multi-component handle with

roll-off protection.

SoftFinish®slotted screwdriver.

ﬁnish on tip for a perfect ﬁt every time.

Order-No. 27754 6.01001,0 5,5 218 36 10 27755 6.0 150 1,0 5,5 268 36 10 00704 6.51001,2 6,0 218 36 10 00703 6.5 150 1,2 6,0 268 36 10 00706 6.5• 200 1,2 6,0 318 36 5 00708 8.0 150 1,2 7,0 274 41 10 00707 8.01751,2 7,0 299 41 5 00709 8.0 175 1,6 7,0 299 41 5 32399 8.03001,2 7,0 424 41 5 00711 10.0 200 1,6 8,0 324 41 5 32400 10.03001,6 8,0 424 41 5 00712 12.0 250 2,0 8,0 374 41 5 00713 14.02502,5 11,0 374 41 5

• Additional dimension. Non-DIN size.

398

SoftFinish®slotted screw-holding screwdriver. Clamping sleeve holds the screw.

Blade: Chrome-vanadium steel, through hardened, black-ﬁnish. Handle: Ergonomic Wiha SoftFinish

multi-component handle with

roll-off protection.

Application: For setting and turning screws in difﬁcult to access areas.

Order-No. 32867 2.5750,4 186 30 5 32868 3.0 100 0,5 211 30 5 32869 4.0 125 0,8 243 36 5 32870 5.0 150 1,0 268 36 5 32871 6.0 175 1,2 293 36 5

EN_s008-071_SD_2012 14.02.12 18:44 Seite 14

Wiha SoftFinish®.

The specialist for dry and general applications.

For Phillips screws.

311

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN ISO 8764. Application: Especially for dry and general applications.

Order-No. 00754 PH0 60 3,0 164 23 10 27756 PH0 100 3,0 204 23 10 00756 PH1 80 4,5 191 30 10 27757 PH1 100 4,5 211 30 10 00757 PH1• 200 4,5 311 30 10 03738 PH1• 300 4,5 411 30 5

0759 PH2 1006,0 218 36 10

0 27758 PH2 150 6,0 268 36 10 00760 PH2• 200 6,0 318 36 5 03739 PH2• 300 6,0 418 36 5 00762 PH3 150 8,0 274 41 10 00763 PH4 200 10,0 324 41 5

• Additional dimension. Non-DIN size.

312

Order-No. 00764 PH1 80 5,0 8 186 30 10 00765 PH2 100 6,0 10 213 36 10 00766 PH3 150 8,0 13 268 41 10 00767 PH4 200 10,0 16 318 41 5

SoftFinish®Phillips screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

SoftFinish®Phillips screwdriver. Hex blade with hex bolster.

For Pozidriv screws.

313

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN ISO 8764. Application: Especially for dry and general applications.

Order-No. 00768 PZ0 60 3,0 164 23 10 00770 PZ1 80 4,5 191 30 10 26454 PZ1 300 4,5 411 30 5 00772 PZ2 100 6,0 218 36 10 26455 PZ2 300 6,0 418 36 5 00774 PZ3 150 8,0 274 41 10

314

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN ISO 8764. Application: Especially for dry and general applications.

Order-No. 00776 PZ1 80 5,0 8 186 30 10 00777 PZ2 100 6,0 10 213 36 10 00778 PZ3 150 8,0 13 268 41 10 00779 PZ4 200 10,0 16 318 41 5

SoftFinish®Pozidriv screwdriver. Round blade.

chrome-plated. Wiha ChromTop

multi-component handle with

roll-off protection.

SoftFinish®Pozidriv screwdriver. Hex blade with hex bolster.

chrome-plated. Wiha ChromTop

multi-component handle with

roll-off protection.

ﬁnish on tip for a perfect ﬁt every time.

531

SoftFinish

Phillips screwdriver.

One-piece hexago

blade with hexagon head, sol

id ste

Order-No. 03237 PH1 80 5,0 8 186 30 10 03238 PH2 100 6,0 10 213 36 10 03239 PH3 150 8,0 13 268 41 10

397

SoftFinish®Phillips screw-holding screwdriver. Clamping sleeve holds the screw.

Blade: Chrome-vanadium steel, through hardened, black-ﬁnish. Handle: Ergonomic Wiha SoftFinish

multi-component handle with

roll-off protection.

Application: For setting and turning screws in difﬁcult to access areas.

Order-No. 32406 PH0 100 211 30 5 32404 PH1 125 236 36 5 32405 PH2 175 286 36 5

el cap

532

SoftFinish®Pozidriv screwdriver. One-piece hexagon blade with hexagon head, solid steel cap.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

Handle: Ergonomic Wiha SoftFinish

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection. Standards: DIN ISO 8764. Application: Especially for dry and general applications.

Order-No. 03245 PZ1 80 5,0 8 186 30 10 03246 PZ2 100 6,0 10 213 36 10 03247 PZ3 150 8,0 13 268 41 10

EN_s008-071_SD_2012 14.02.12 18:44 Seite 15

www.wiha.com

Screwdriver with mm scale.

3021

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN 7437, DIN 5264, DIN ISO 2380. Application: Especially for dry and general applications.

xtra: High-contrast millimetre scale permanently lasered on to the blade for

Order-No. 36085 4.01000,8 4,0 211 30 20-90 10 35397 5.5 125 1,0 5,5 236 30 30-110 10

3111

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Standards: DIN ISO 8764. Application: Especially for dry and general applications. Extra: High-contrast millimetre scale permanently lasered on to the blade for

SoftFinish®slotted screwdriver. Round blade with lasered mm scale.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

depth, inner, outer and step measurements.

SoftFinish®Phillips screwdriver. Round blade with lasered mm scale.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

depth, inner, outer and step measurements.

Screwdriver with mm scale.

NEW

SB3021 S2

Order-No. Series 36205 SB3021 S2 1

SoftFinish®slotted/Phillips screwdriver set, 2-pcs. Round blade with lasered mm scale. Blister packed.

3021 5.5x125 3111 PH2x100

Order-No. 36072 PH1 80 4,5 191 30 20-70 10 35398 PH2 100 6,0 218 36 20-90 10

3131

SoftFinish®Pozidriv screwdriver. Round blade with lasered mm scale.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

Handle: Ergonomic Wiha SoftFinish

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection. Standards: DIN ISO 8764. Application: Especially for dry and general applications. Extra: High-contrast millimetre scale permanently lasered on to the blade for

depth, inner, outer and step measurements.

Order-No. 36073 PZ1 80 4,5 191 30 20-70 10 35399 PZ2 100 6,0 218 36 20-90 10

3021 VB

Display SoftFinish®with scale. Card display with 18 pcs.

Order-No. 35555 Card display with 18 pcs.

3021 6x5.5 3111 6xPH2 3131 6xPZ2

EN_s008-071_SD_2012 14.02.12 18:45 Seite 16

Wiha SoftFinish®.

The specialist for dry and general applications.

Stubby-screwdriver.

302

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

andle: Ergonomic Wiha Stubby SoftFinish

Standards: DIN 5265, DIN ISO 2380, handle acc. to DIN 5268 - style K. Application: For working in conﬁned spaces.

Order-No. 26964 4.0250,8 4,0 81 34 10 26965 5.5 25 1,0 5,5 81 34 10 26966 6.5251,2 6,5 81 34 10 26967 8.0 25 1,2 8,0 81 34 10

311

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha Stubby SoftFinish

Standards: DIN ISO 8764, handle based on DIN 5268 - style K. Application: For working in conﬁned spaces.

SoftFinish®slotted screwdriver. Short round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

roll-off protection.

SoftFinish®Phillips screwdriver. Short round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

roll-off protection.

andle, multi-component with

handle, multi-component with

For TORX®screws.

362

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. 26259 T3 60 2,5 164 23 10 26260 T4 60 2,5 164 23 10 01285 T5 60 2,5 164 23 10 01286 T6 60 3,5 164 23 10 01287 T7 60 3,5 164 23 10 01288 T8 60 3,5 164 23 10 01289 T9 60 4,0 171 30 10 01290 T10 80 4,0 191 30 10 01291 T15 80 4,0 191 30 10 01292 T20 100 4,0 218 36 10 01293 T25 100 4,5 218 36 10 01294 T27 115 5,5 233 36 10 01295 T30 115 6,0 233 36 10 01296 T40 130 7,0 254 41 10 01297 T45 130 8,0 254 41 5

SoftFinish®TORX®screwdriver. Round blade.

chrome-plated. Wiha ChromTop

oll-off protection.

multi-component handle with

ﬁnish on tip for a perfect ﬁt every time.

Order-No. 26968 PH1 25 4,5 81 34 10 26969 PH2 25 6,0 81 34 10 26970 PH3 25 8,0 81 34 10

313

SoftFinish®Pozidriv screwdriver. Short round blade.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

Handle: Ergonomic Wiha Stubby SoftFinish

ﬁnish on tip for a perfect ﬁt every time.

handle, multi-component with

roll-off protection. Standards: DIN ISO 8764, handle based on DIN 5268 - style K. Application: For working in conﬁned spaces.

Order-No. 26971 PZ1 25 4,5 81 34 10 26972 PZ2 25 6,0 81 34 10 26973 PZ3 25 8,0 81 34 10

362BE

SoftFinish®TORX®ball end screwdriver. Hex blade.

Blade: High-quality chrome-molybdenum steel, through-hardened,

chrome-plated. Wiha ChromTop

Handle: Ergonomic Wiha SoftFinish

roll-off protection. Application: For all hard-to-reach TORX Extra: The TORX

ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

screws.

proﬁle behind ball end.

Order-No. 32250 T9 60 7/64 2,8 164 23 10 32251 T10 60 1/8 3,2 184 23 10 32252 T15 80 9/64 3,6 191 30 10 32253 T20 80 5/32 4,0 211 30 10 32254 T25 100 3/16 4,8 218 36 10 32255 T27 115 7/32 5,6 233 36 10 32256 T30 115 1/4 6,4 233 36 10

EN_s008-071_SD_2012 14.02.12 18:45 Seite 17

www.wiha.com

For TORX®and TORX®tamper resistant screws.

362R

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: For setting and tightening TORX

Order-No. 27736 T6 60 3,5 164 23 10 27737 T7 60 3,5 164 23 10 27738 T8 60 3,5 164 23 10 27739 T9 60 4,0 171 30 10 27740 T10 80 4,0 191 30 10 27741 T15 80 4,0 191 30 10 27742 T20 100 4,0 218 36 10 27743 T25 100 4,5 218 36 10 27811 T27 115 5,5 233 36 10 27744 T30 115 6,0 233 36 10 27745 T40 130 7,0 254 41 10

SoftFinish®TORX®MagicSpring®screwdriver.

etaining spring holds TORX

chrome-plated. Wiha ChromTop

roll-off protection.

crews in place.

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

screws in difﬁcult to access areas.

For TORX PLUS®screws.

362IP

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications. Extra: The stronger proﬁle of the TORX PLUS

Order-No. 26091 6IP 60 3,5 164 23 10 26093 7IP 60 3,5 164 23 10 26095 8IP 60 3,5 164 23 10 26097 9IP 60 4,0 171 30 10 26099 10IP 80 4,0 191 30 10 26101 15IP 80 4,0 191 30 10 26103 20IP 100 4,0 218 36 10 26105 25IP 100 4,5 218 36 10 26107 27IP 115 5,5 233 36 10 26109 30IP 115 6,0 233 36 10 26111 40IP 130 7,0 254 41 10

SoftFinish®TORX PLUS®screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

than the TORX

proﬁle.

tip allows up to 25% extra torque

362TR

SoftFinish®TORX®Tamper Resistant screwdriver. With borehole in the blade tip.For TORX

screws with locking pin.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop With borehole in the blade tip.

Handle: Ergonomic Wiha SoftFinish

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

Order-No. 03106 T7H 60 3,5 164 23 10 03107 T8H 60 3,5 164 23 10 03108 T9H 60 4,0 171 30 10 26456 T9H 300 4,0 411 30 5 01300 T10H 80 4,0 191 30 10 26457 T10H 300 4,0 411 30 5 01301 T15H 80 4,0 191 30 10 26458 T15H 300 5,0 411 30 5 01302 T20H 100 4,0 211 30 10 28005 T20H 300 5,0 411 30 5 01303 T25H 100 4,5 211 30 10 01304 T27H 115 5,5 233 36 10 01305 T30H 115 6,0 233 36 10 01306 T40H 130 7,0 254 41 10

362RIP

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: For setting and tightening TORX PLUS Extra: The stronger proﬁle of the TORX PLUS

SoftFinish®TORX PLUS®MagicSpring®screwdriver. Retaining spring holds TORX PLUS

chrome-plated. Wiha ChromTop

roll-off protection.

than the TORX

proﬁle.

screws in place.

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

screws in hard to reach areas.

tip allows up to 25% extra torque

Order-No. 28760 6IP 60 3,5 164 23 10 28761 7IP 60 3,5 164 23 10 28762 8IP 60 3,5 164 23 10 28763 9IP 60 4,0 171 30 10 28764 10IP 80 4,0 191 30 10 28765 15IP 80 4,0 191 30 10 28766 20IP 100 4,0 218 36 10 28767 25IP 100 4,5 218 36 10 28768 27IP 115 5,5 233 36 10 28769 30IP 115 6,0 233 36 10 28770 40IP 130 7,0 254 41 10

EN_s008-071_SD_2012 14.02.12 18:45 Seite 18

Wiha SoftFinish®.

The specialist for dry and general applications.

For hex socket screws.

367

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: For all screws that are difﬁcult to access. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 26303 1.575179 23 10 26304 2 100 204 23 10 26305 2.5 100 204 23 10 26328 3 100 204 23 10 26329 4 100 211 30 10 26330 5 100 211 30 10 26331 6 125 243 36 10 26332 8 150 268 36 10 26333 10 150 271 41 5 26307 12 150 271 41 5

SoftFinish®ball end hex screwdriver. Hex blade.

roll-off protection.

multi-component handle with

For angle and slotted screws.

357

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: Ideal for high-torque applications, e.g. in workshops.

Order-No. 26230 3 35 20 139 23 10 26231 4 40 25 151 30 10 26232 5 45 28 156 30 10 26233 6 50 32 168 36 10 26234 8 60 36 178 36 10 26235 10 75 40 199 41 10

SoftFinish®offset hex screwdriver. Hex blade.

roll-off protection.

multi-component handle with

367R

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: For setting and turning screws in difﬁcult to access areas. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 26077 3 100 204 23 10 26079 4 100 211 30 10 26081 5 100 211 30 10 26083 6 125 243 36 10 26085 8 150 268 36 10 26087 10 150 271 41 5

356

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Order-No. 32264 1.560164 23 10 32265 2.0 60 164 23 10 26190 2.575179 23 10 26191 3 75 179 23 10 26192 4 75 186 30 10 26193 5 75 186 30 10 26194 6 100 218 36 10 26195 8 100 218 36 10

SoftFinish®MagicRing®ball end hex screwdriver. Ring made of spring steel holds hex screws in place.

roll-off protection.

SoftFinish®hex screwdriver. Hex blade.

roll-off protection.

multi-component handle with

305

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Standards: DIN 3125. Application: For nuts DIN 546.

Order-No. 32364 M1.7800,5 4,0 184 23 5 32363 M2 80 1,0 4,5 184 23 5 32362 M2.3901,0 5,0 201 30 5 32361 M2.6 90 1,2 5,5 201 30 5 32360 M3 100 1,2 6,0 211 30 5 32358 M3.5 100 1,4 7,0 218 36 5 32359 M4 100 1,4 8,0 218 36 5 32357 M5 125 2,0 10,0 243 36 5 32356 M6 125 2,5 11,0 243 36 5 32355 M8 150 3,0 14,0 274 41 5 32354 M10 150 3,5 18,0 274 41 5

SoftFinish®slotted nut driver. Round blade.

roll-off protection.

multi-component handle with

EN_s008-071_SD_2012 14.02.12 18:45 Seite 19

www.wiha.com

For hex nuts.

341

Blade: Chrome-vanadium steel, through hardened, chrome-plated.

Handle: Ergonomic Wiha SoftFinish

Standards: DIN 3125. Application: Especially for dry and general applications.

Order-No. 01018 4 125 236 30 6,9 10 01020 5 125 236 30 7,9 10 01021 5.5125236 30 7,9 10 01022 6 125 236 30 8,9 10 01023 7 125 243 36 10,9 10 01024 8 125 243 36 11,9 10 01025 9 125 243 36 12,9 10 01026 10 125 243 36 14,4 10 01027 11 125 249 41 15,9 5 01028 12 125 249 41 16,9 5 01029 13 125 249 41 18,4 5 01030 14 125 249 41 19,4 5 01031 15 125 249 41 21,9 5 01032 16 125 249 41 21,9 5 01033 17 125 249 41 23,4 5

SoftFinish®hex nut driver. vRound blade.

Deep drawn socket.

multi-component handle with

roll-off protection.

For hex and triangular nuts.

343

Blade: Chrome-vanadium steel, through hardened, chrome-plated.

Handle: Ergonomic Wiha SoftFinish

Application: For working in conﬁned spaces.

rder-No.

O 01076 5.565176 30 8 10 01077 6 65 176 30 9 10 01078 7 65 183 36 11 10 01079 8 65 183 36 12 10 01081 10 65 183 36 14 10

372

Handle: Ergonomic Wiha SoftFinish

Application: E.g. for tightening and loosening adjustable hose clamps.

SoftFinish®hex nut driver. Short round blade.

Deep drawn socket.

multi-component handle with

roll-off protection.

SoftFinish®hex nut driver. Flexible shaft for hard to reach areas.

multi-component handle with

roll-off protection.

347

SoftFinish®hex nut driver. Round blade with hex bolster.

Blade: Chrome-vanadium steel, through hardened, chrome-plated.

Handle: Ergonomic Wiha SoftFinish

Deep drawn socket.

multi-component handle with

roll-off protection. Standards: DIN 3125. Application: Especially for dry and general applications.

Order-No. 01092 7 125 10 238 36 11,0 10 01093 8 125 10 238 36 12,0 10 01094 9 125 10 238 36 13,0 10 01095 10 125 10 238 36 14,5 10 01096 11 125 13 246 41 16,0 5 01097 12 125 13 246 41 17,0 5 01098 13 125 13 246 41 19,0 5

347 Zoll

SoftFinish®hex nut driver. Inch sizes.

Round blade with hex bolster.

Blade: Chrome-vanadium steel, through hardened, nickel-plated.

Handle: Ergonomic Wiha SoftFinish

Deep drawn socket.

multi-component handle with

roll-off protection. Application: Especially for dry and general applications.

Order-No. 02836 3/16 125 10 231 30 4,76 8 10 02837 1/4 125 10 238 36 6,35 10 10 02838 5/16 125 10 238 36 7,94 12 10 02839 3/8 125 10 238 36 9,53 14 10 02840 7/16 125 13 246 41 11,11 16 10 02841 1/2 125 13 246 41 12,70 19 10

Order-No. 01435 5 150 261 30 8 10 01436 5.5 150 261 30 8 10 01437 6 150 261 30 9 10 01438 7 150 268 36 11 10 01439 8 150 268 36 12 10 01440 10 175 293 41 14 10 01443 13 175 293 41 19 5

344

SoftFinish®triangular nut driver. Round blade.

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

multi-component handle with

roll-off protection. Standards: DIN 22416. Application: For triangular screws DIN 22424 and triangular nuts DIN 22425.

Order-No. 26212 M4 125 6,8 236 30 11 10 26213 M5 125 8,3 236 30 13 10 26216 M6 125 10,05 236 30 16 10 26214 M8 125 12,05 243 36 18 10 26217 M10 125 15,05 243 36 22 10 26218 M12 125 16,55 249 41 24 10

EN_s008-071_SD_2012 14.02.12 18:45 Seite 20

Wiha SoftFinish®.

The specialist for dry and general applications.

Sets with round blades.

302 HK6 SO

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 07152 302 HK6 SO 1

SoftFinish®slotted/ Phillips screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

roll-off protection.

302 3.5x100 4.5x125 5.5x150 6.5x150 311 PH1x80 PH2x100

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

Sets with round blades.

302 HK6 01

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 26113 302 HK6 01 1

SoftFinish®slotted/ Phillips/ Pozidriv screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

roll-off protection.

302 4.0x100 5.5x125 6.5x150 311 PH1x80 PH2x100 313 PZ2x100

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

302 ZK6 SO

Order-No. Series 07153 302 ZK6 SO 1

SoftFinish®slotted/ Pozidriv screwdriver set, 6 pcs. Round blades.

302 3.5x100 4.5x125 5.5x150 6.5x150 313 PZ1x80 PZ2x100

311 K6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 26146 311 K6 1

SoftFinish®Phillips/Pozidriv screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

roll-off protection.

311 PH1x80 PH2x100 PH3x150 313 PZ1x80 PZ2x100 PZ3x150

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

EN_s008-071_SD_2012 14.02.12 18:45 Seite 21

www.wiha.com

Sets with hex blades.

308 HK6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 21248 308 HK6 1

SoftFinish®slotted/ Phillips screwdriver set, 6 pcs. Hex blades with hex bolster.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

308 3.5x75 4.5x90 5.5x100 7.0x125 312 PH1x80 PH2x100

Sets with steel caps. Nut driver set.

530 HK6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 21250 530 HK6 1

SoftFinish®slotted/ Phillips screwdriver set, 6 pcs.

Hex blades with hex bolster, solid steel cap.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

530 3.5x75 4.5x90 5.5x100 6.5x125

531 PH1x80 PH2x100

308 ZK6

SoftFinish®slotted/ Pozidriv screwdriver set, 6 pcs. Hex blades with hex bolster.

Order-No. Series 21249 308 ZK6 1

308 3.5x75 4.5x90 5.5x100 7.0x125 314 PZ1x80 PZ2x100

530 ZK6

SoftFinish®slotted/ Pozidriv screwdriver set, 6 pcs.

Hex blades with hex bolster, solid steel cap.

Order-No. Series 21251 530 ZK6 1

530 3.5x75 4.5x90 5.5x100 6.5x125

532 PZ1x80 PZ2x100

EN_s008-071_SD_2012 14.02.12 18:45 Seite 22

Wiha SoftFinish®.

The specialist for dry and general applications.

TORX®sets.

362 K6 SO

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 07155 362 K6 SO 1

SoftFinish®TORX®screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

362 T10x80 T15x80 T20x100

T25x100 T30x115 T40x130

TORX®sets.

362BE K6

Blade: High-quality chrome-molybdenum steel, through-hardened, chrome-pla-

Handle: Ergonomic Wiha SoftFinish

Application: For all hard-to-reach TORX Extra: The TORX

Order-No. Series 32249 362BE K6 1

SoftFinish®TORX®ball end screwdriver set, 6 pcs. Hex blade.

ted. Wiha ChromTop

roll-off protection.

to 25°. With elongated TORX

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

ball end enables fastening and unfastening at an angle of up

screws.

proﬁle behind ball end.

362BE T9x60 T10x60 T15x80

T20x80 T25x100 T30x115

362 K7

SoftFinish®TORX®screwdriver set, 7 pcs. Round blades.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

Handle: Ergonomic Wiha SoftFinish

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

Application: Especially for dry and general applications.

Order-No. Series 01299 362 K7 1

362 T8x60 T9x60 T10x80 T15x80

T20x100 T25x100 T30x115

362R K6 SO

SoftFinish®TORX®MagicSpring®screwdriver set, 6 pcs. Retaining spring holds TORX

screws in place.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

Handle: Ergonomic Wiha SoftFinish

roll-off protection.

Application: For setting and tightening TORX

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

screws in difﬁcult to access areas.

Order-No. Series 27746 362R K6 SO 1

362R T10x80 T15x80 T20x100

T25x100 T30x115 T40x130

EN_s008-071_SD_2012 14.02.12 18:45 Seite 23

www.wiha.com

Sets.

362 K6 01

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. Series 26114 362 K6 01 1

SoftFinish®Pozidriv/TORX®screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

roll-off protection.

313 PZ1x80 PZ2x100 362 T10x80 T15x80 T20x100 T25x100

Sets.

362TR K6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: For turning TORX

Order-No. Series 24506 362TR K6 1

SoftFinish®TORX®Tamper Resistant screwdriver set, 6 pcs.

For TORX

chrome-plated. Wiha ChromTop

With borehole in the blade tip.

roll-off protection.

screws with locking pin.

ﬁnish on tip for a perfect ﬁt every time.

multi-component handle with

Tamper Resistant safety screws.

362TR T10Hx80 T15Hx80 T20Hx100

T25Hx100 T30Hx115 T40Hx130

341 K5

SoftFinish®hex nut driver set, 5 pcs.

Round blades.

Blade: Chrome-vanadium steel, through hardened, chrome-plated.

Handle: Ergonomic Wiha SoftFinish

Deep drawn socket.

multi-component handle with

roll-off protection. Application: Especially for dry and general applications.

Order-No. Series 01034 341 K5 1

341 5.5x125 7x125 8x125

10x125 13x125

EN_s008-071_SD_2012 14.02.12 18:45 Seite 24

Wiha MicroFinish.

The specialist for wet and oily applications.

Non-slip

Optimum power transfer, even with very oily hands!

Wiha MicroFinish screwdrivers stand for contemporary handle design, together with the ideal combination of materials for wet and oily applications.

The micro-fine surface of the finish zone made of sandblasted cellulose-acetate ensures maximum power transfer and provides an effective non-slip grip, even with very oily hands. The roll-off protection

in the front area of the handle prevents the tool from rolling off the workbench. The screwdriver is also available with a solid steel cap for loosening tight screws with a single hammer blow. As the steel cap is connected to the blade, the entire the impact is transmitted

energy from

to the screw head without damaging either the handle or the blade.

The MicroFinish hex blades with ChromTop

tip are made of highquality chrome-vanadium-molybdenum steel, are through-hardened and chrome-plated. This guarantees a particularly long tool life.

Wiha’s MicroFinish screwdrivers are ideal for automotive applications, for use on building sites or when working with sanitary installations. However, they can also be used to perform repairs to machinery and equipment where oil and lubricants pose potential problems.

The hex blade and hex bolster model with solid steel cap is ideal for loosening tight screws.

The non-slip handle is made from cellulose acetate and has a micro-fine surface structure. This gives maximum torque transmission and perfect handling in wet and oily work surroundings.

Wiha MicroFinish.

Micro-fine handle surface

•

for a non-slip grip in an oily working environment

Ergonomic handle shape fits

•

every hand

Blades made of high-quality

•

chrome-vanadium-steel, through-hardened and chromeplated for a long tool life

Wiha ChromTop®blade tip

•

sits securely in the screw head and offers great dimensional accuracy

EN_s008-071_SD_2012 14.02.12 18:45 Seite 25

www.wiha.com

For slotted screws.

5520

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN 5265, DIN ISO 2380. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29115 3.51000,6 3,5 204 23 10 29116 4.0 100 0,8 4,0 211 30 10 29117 4.0• 150 0,8 4,0 261 30 10 29118 5.5 125 1,0 5,5 236 30 10 29119 5.51501,0 5,5 261 30 10 29120 6.5 150 1,2 6,0 268 36 10 29121 8.01501,2 7,0 274 41 10 29122 8.0 175 1,2 7,0 299 41 10 29123 10.02001,6 8,0 324 41 5

• Additional dimension. Non-DIN size.

MicroFinish slotted screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

For Phillips screws.

5521

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN ISO 8764. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29140 PH0 60 3,0 165 23 10 29141 PH1 80 4,5 192 30 10 29142 PH1• 200 4,5 312 30 5 29143 PH2 100 6,0 220 36 10 29144 PH2• 200 6,0 320 36 5 29145 PH3 150 8,0 277 41 10

• Additional dimension. Non-DIN size.

MicroFinish Phillips screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

5533

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN 5265, DIN ISO 2380. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29133 4.5• 90 0,8 4,0 - 201 30 10 29134 5.5 100 1,0 5,0 8 213 36 10 29135 6.51251,2 6,0 10 238 36 10 29136 8.0 150 1,2 8,0 13 271 41 5 29137 10.01751,6 8,0 13 296 41 5

• Additional dimension. Non-DIN size.

MicroFinish slotted screwdriver. One-piece hexagon blade with hexagon head, solid steel cap.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

5534

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN ISO 8764. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29149 PH1 80 5,0 8 187 30 10 29150 PH2 100 6,0 10 214 36 10 29151 PH3 150 8,0 13 271 41 10

MicroFinish Phillips screwdriver. One-piece hexagon blade with hexagon head, solid steel cap.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

Wiha Info

Wiha MicroFinish.

Due to the sandblasted surface, oil and moisture flow away from the handle surface for a powerful, non-slip grip – a maximum force and comfort with dry, oily or wet hands is ensured. The ergonomic handle shape ensures also exceptional torque transfer.

EN_s008-071_SD_2012 14.02.12 18:45 Seite 26

Wiha MicroFinish.

The specialist for wet and oily applications.

For Pozidriv and TORX®screws.

5522

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN ISO 8764. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29152 PZ1 80 4,5 192 30 10 29153 PZ2 100 6,0 220 36 10 29154 PZ3 150 8,0 277 41 10

5535

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN ISO 8764. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29158 PZ1 80 5,0 8 187 30 10 29159 PZ2 100 6,0 10 214 36 10 29160 PZ3 150 8,0 13 271 41 5

MicroFinish Pozidriv screwdriver. Round blade.

chrome-plated. Wiha ChromTop

MicroFinish Pozidriv screwdriver. One-piece hexagon blade with hexagon head, solid steel cap.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

For hex nuts.

5525

Blade: Chrome-vanadium steel, through hardened, chrome-plated.

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN 3125. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29170 5.5 125 237 30 7,9 10 29171 6 125 237 30 8,9 10 29172 7 125 245 36 10,9 10 29173 8 125 245 36 11,9 10 29174 10 125 245 36 14,4 10

5528

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: E.g. for tightening and loosening adjustable hose clamps.

Order-No. 29175 6 150 262 30 9 10 29176 7 150 270 36 11 10 29177 8 150 270 36 12 10

MicroFinish hex nut driver. Round blade.

Deep drawn socket.

MicroFinish hex nut driver. Flexible shaft for hard to reach areas.

TORX®set.

5527

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.

Order-No. 29161 T9 60 4,0 172 30 10 29162 T10 80 4,0 192 30 10 29163 T15 80 4,0 192 30 10 29164 T20 100 4,0 212 30 10 29165 T25 100 4,5 212 30 10 29166 T27 115 5,5 235 36 10 29167 T30 115 6,0 235 36 10 29168 T40 130 7,0 257 41 5

MicroFinish TORX®screwdriver. Round blade.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

5527 K6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.

Order-No. Series 29169 5527 K6 1

MicroFinish TORX®screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

5527 T10x80 T15x80 T20x100

ﬁnish on tip for a perfect ﬁt every time.

T25x100 T30x115 T40x130

EN_s008-071_SD_2012 14.02.12 18:46 Seite 27

www.wiha.com

Sets with round blades.

5520 HK6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.

Order-No. Series 29124 5520 HK6 1

MicroFinish slotted/ Phillips screwdriver set, 6 pcs. Round blades.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

5520 3.5x100 4.0x100 5.5x125 6.5x150 5521 PH1x80 PH2x100

Sets with steel caps.

5533 HK5

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.

Order-No. Series 29138 5533 HK5 1

MicroFinish slotted/ Phillips screwdriver set, 5 pcs. Hex blades with hex bolster, solid steel cap.

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time.

5533 5.5x100 6.5x125 8.0x150 5534 PH1x80 PH2x100

5520 ZK6

MicroFinish slotted/ Pozidriv screwdriver set, 6 pcs. Round blades.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time. Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.

Order-No. Series 29125 5520 ZK6 1

5520 3.5x100 4.0x100 5.5x125 6.5x150 5522 PZ1x80 PZ2x100

5533 ZK5

MicroFinish slotted/ Pozidriv screwdriver set, 5 pcs. Hex blades with hex bolster, solid steel cap.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

chrome-plated. Wiha ChromTop

ﬁnish on tip for a perfect ﬁt every time. Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.

Order-No. Series 29139 5533 ZK5 1

5533 5.5x100 6.5x125 8.0x150 5535 PZ1x80 PZ2x100

+ 44 hidden pages

Wiha Tools Screwdrivers User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual