Wiha Tools Manufacturing Tools User Manual

Download

Wiha Manufacturing Tools.

When you can't afford to make compromises.

Wiha Manufacturing Tools.

When you can't afford to make compromises.

Wiha Hexagon-Tools with MagicRing®. Page 4

Wiha Hexagon-Tools. Page 7

Where to find what.

Are you looking for the ideal tool for the job?

In order to make your search easier, we have organised our tool sortiment according to screw profiles and product groups.

With the profiles you have the

choice of hexagon, TORX

TORX PLUS

screw tools.

and

Wiha TORX

Wiha TORX PLUS

Wiha TORX PLUS®-Tools. Page 34

Wiha Torque-Tools. Page 37

Wiha Pliers. Page 44

-Tools with MagicSpring®. Page 18

-Tools. Page 22

-Tools with MagicSpring®. Page 32

Further product groups available are torque tools, pliers, soft head hammers and articulated hoses.

Wiha Hammers. Page 55

Wiha Articulated Hose System. Page 57

Wiha Hexagon-Tools with MagicRing®.

Securely holds hexagon bolts in place in any position.

Wiha MagicRing

hexagon L-key.

• Suitable for removing sunk-head standard screws and for inserting and working screws in horizontal, inclined of deep pocket holes

• Holds screws made of steel and nonmagnetisable materials such as stainless steel, titanium and aluminium

• Ideal for applications where there is insufficient space for a simple hex key

• No troublesome searching for dropped screws

Ball End Hex L-Key, Long. Page 5 With MagicRing

• Chrome-vanadium steel, through hardened, chromeplated

• Based on ISO 2936L

• Especially in difficult to access areas

• The ball end enables the user to work at angles up to 25°

Hex Driver with ComfortGrip. Page 6 With MagicRing

• Useful when loosening or tightening screws that are rusted-in, glued into position or particularly hard to move

Hex Driver with T-Handle. Page 6 With MagicRing

• High torque transmission thanks to ergonomic handle

• The angled blade end is injection-moulded into the T-handle and non detachable

Wiha SoftFinish Ball End Hex Screwdriver.

and Side Blade.

MagicRing

• The through blade withstands even the highest stresses

• Ergonomic handle

• optimum corrosion protection and a long service life

• Hanging hole for workshop storage

• Made of high-quality plastic

Page 6

• Ergonomic Wiha SoftFinish multi-component handle

• Ergonomically perfect handle design

• Wiha ChromTop for a perfect fit every time

-finish on tip

Wiha Hexagon-Tools with MagicRing®.

Securely holds hexagon bolts in place in any position.

For Allen screws (metric).

Wiha MagicRing

Ball End Hex L-Key (Inch).

369R

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Standards: Based on ISO 2936L. Application: Insert screws into or remove from boreholes, especially in difficult to

Extra: MagicRing

Order-No. 20549 2 3 128 23 10 20550 8 4 142 29 10 20570 6 5 163 33 10 20551 5 6 184 38 10 20552 2 8 206 44 10 20553 9 10 231 50 5

Ball End Hex L-Key, Long. With MagicRing®.

access areas.

various angles (available from 3 mm). The ball end enables the user to work at angles up to 25°.

made from spring steel holds all standard screws tight at

369R Zoll

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Normen: ASME B18.3. Application: Insert hex inch screws into and remove from boreholes, especially in

Extra: MagicRing

Order-No. 29471 7 0.05 72 13 1.27 10 29472 4 1/16 80 15 1.59 10 29474 8 5/64 88 18 1.98 10 29473 1 3/32 101 20 2.38 10 29475 5 7/64 111 21 2.78 10 24302 9 1/8 121 23 3.17 10 24304 3 9/64 136 27 3.57 10 24303 6 5/32 148 29 3.96 10 24305 0 3/16 163 33 4.76 10 24306 7 7/32 176 36 5.55 10 24307 4 1/4 191 38 6.35 10 24308 1 5/16 210 43 7.93 10 24341 8 3/8 232 50 9.52 10

Ball End Hex L-Key, Long. With MagicRing®. Inch Sizes.

difficult to access areas.

various angles (available from 1/8"). The ball end enables the user to work at angles up to 25°.

made from spring steel holds all standard screws tight at

369R S9

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Standards: Based on ISO 2936L. Application: Insert screws into or remove from boreholes, especially in difficult to

Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 20709 0

Ball End Hex L-Key Set in ProStar. With MagicRing®, Chrome-plated, 9 pcs.

access areas.

any others. MagicRing various angles (available from 3 mm). The ball end enables the user to work at angles up to 25°.

369R S9

369 1.5 2 2.5 369R 3456810

made from spring steel holds all standard screws tight at

MagicRing®holds all standard screws!

• DIN 6912

• DIN 7984

• DIN EN ISO 4762

• DIN EN ISO 10642

• DIN EN ISO 4026

• DIN EN ISO 4027

• DIN EN ISO 4028

• DIN EN ISO 4029

• DIN EN ISO 7380

369R SZ13

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Normen: ASME B18.3. Application: Insert hex inch screws into and remove from boreholes, especially in

Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 24190 2

Ball End Hex L-Key Set in ProStar. With MagicRing®, Chrome-plated, 13 pcs. Inch Sizes.

difficult to access areas.

any others. MagicRing various angles (available from 1/8"). The ball end enables the user to work at angles up to 25°.

369R SZ13

369 Zoll C 0.05 1/16 5/64 3/32 7/64 369R Zoll 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

made from spring steel holds all standard screws tight at

Wiha Hexagon-Tools with MagicRing®.

Securely holds hexagon bolts in place in any position.

Wiha ComfortGrip.

334DSR

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha ComfortGrip, the comfortable multi-component T-handle with soft

Application: For comfortable high torque transfer and to insert and remove screws

Extra: MagicRing

Order-No. 26135 1 3 100 13 80 26 10 26136 8 4 150 13 80 26 10 26137 5 5 150 17 100 32 10 26138 2 6 150 17 100 32 10 26139 9 8 200 17 100 32 10 26140 5 10 200 22 120 38 10

Hex Driver with ComfortGrip. With MagicRing®and Side Blade.

zones for maximum working comfort.

from holes. Especially useful for loosening or tightening screws that are hard to move.

various angles (available from 3 mm). One piece blade, through the handle withstands even the highest stresses.

made from spring steel holds all standard screws tight at

Wiha T-Handle.

334R

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: MagicRing

Order-No. 22168 3 3 100 126 80 26 10 22170 6 4 150 176 80 26 10 22172 0 5 150 182 100 32 10 22174 4 6 150 182 100 32 10 21960 4 8 200 232 100 32 10 21962 8 10 200 238 120 38 10

Hex Driver with T-Handle. With MagicRing®.

made from spring steel holds all standard screws tight at

various angles (available from 3 mm).

Wiha SoftFinish®.

367R

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: For setting and turning screws in difficult to access areas. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 26077 4 3 100 204 23 10 26079 8 4 100 211 30 10 26081 1 5 100 211 30 10 26083 5 6 125 243 36 10 26085 9 8 150 268 36 10 26087 3 10 150 271 41 5

SoftFinish®MagicRing®Ball End Hex Screwdriver. Ring Made of Spring Steel holds Hex Screws in Place.

multi-component handle with roll-off

protection.

334R VB

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: MagicRing

Order-No. Series 22096 9

Hex Driver Set with T-Handle. With MagicRing®, in Bench Stand, 6 pcs.

made from spring steel holds all standard screws in every position. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale.

334R VB

334R 3x100 4x150 5x150

6x150 8x200 10x200

Wiha Info

Ergonomics.

Minimise the stress to your body by working with ergonomically designed tools! Wiha's ergonomically designed hand tools improve operator comfort, reduce injuries and increase productivity.

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

Wiha hexagon tools.

• The hex is one of the best-known and most often used profiles.

• Because of superior force distribution when compared to a conventional Phillips screw, an Allen screw can accommodate approximately ten times more torque.

25º

The ball end can be rotated by up to 25° in both clockwise and anti-clockwise direction.

Wiha hexagon tools. Metric and Inch. Page 8 - 14

• Chrome-vanadium steel, through hardened, chromeplated

• Based on ISO 2936L

Hex Driver with ComfortGrip. Page 14 With Side Blade.

• Useful when loosening or tightening screws that are rusted-in, glued into position or particularly hard to move

Hex Driver with T-Handle. Page 15

• Especially in difficult to access areas

• The ball end enables the user to work at angles up to 25°

• The through blade withstands even the highest stresses

• Ergonomic handle

• optimum corrosion protection and a long service life

• High torque transmission thanks to ergonomic handle

• The angled blade end is injection-moulded into the T-handle and non detachable

Wiha SoftFinish

• Ergonomic Wiha SoftFinish multi-component handle

• Ergonomically perfect handle design

and Wiha PicoFinish. Page 16 - 17

• Hanging hole for workshop storage

• Made of high-quality plastic

• Ideal for all fine, filigree applications in electronics and precision-mechanics applications

• Wiha ChromTop a secure hold in the screw head

tip guarantees

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (metric). For Allen screws (metric).

369

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Standards: Based on ISO 2936L. Application: Especially for screws that are difficult to access. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 01392 9 1.5 91 15 10 01393 6 2 101 18 10 01395 0 2.5 113 20 10 01396 7 3 128 23 10 01398 1 4 142 29 10 01400 1 5 163 33 10 01402 5 6 184 38 10 07922 2 7 195 39 5 01404 9 8 206 44 10 01406 3 10 231 50 5 01408 7 12 259 57 5

Ball End Hex L-Key, Long.

369 H9

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Standards: Based on ISO 2936L. Application: Especially for screws that are difficult to access. Extra: Thanks to its compact dimensions, this holder fits easily into every ruler

Order-No. 01418 6

369 H7

Extra: Popular key sizes kept in a well-organised holder.

Ball End Hex L-Key Set in Holder. Chrome-plated, 9 pcs.

pocket. Popular key sizes kept in a well-organised holder. The ball end enables the user to work at angles up to 25°.

369 H9

369 1.5 2 2.5 3456810

Ball End Hex L-Key Set in Holder. Chrome-plated, 7 pcs.

The ball end enables the user to work at angles up to 25°.

369 S9

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Standards: Based on ISO 2936L. Application: Especially for screws that are difficult to access. Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 07185 1

Ball End Hex L-Key Set in ProStar. Chrome-plated, 9 pcs.

any others. The ball end enables the user to work at angles up to 25°.

369 S9

369 1.5 2 2.5 3456810

Order-No. 01416 2

369 B8

Extra: Large, impact resistant sliding box.

Order-No. 01410 0

369 H7

369 1.5 2 2.5 3456

Ball End Hex L-Key Set in Sliding Box. Chrome-plated, 8 pcs.

The ball end enables the user to work at angles up to 25°.

369 B8

369 2 2.5 3456810

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (metric).For Allen screws (metric).

369B

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: Based on ISO 2936L. Application: Especially for screws that are difficult to access. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 01391 2 1.3 74 14 10 05638 4 1.5 91 15 10 03868 7 2 101 18 10 03869 4 2.5 113 20 10 03870 0 3 128 23 10 03871 7 4 142 29 10 03872 4 5 163 33 10 03873 1 6 184 38 10 03874 8 8 206 44 10 03875 5 10 231 50 5 03876 2 12 259 57 5

Ball End Hex L-Key, Long.

369 S9B

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: Based on ISO 2936L. Application: Especially for screws that are difficult to access. Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 07186 8

369 H9B

Ball End Hex L-Key Set in ProStar. Manganese-phosphated, 9 pcs.

any others. The ball end enables the user to work at angles up to 25°.

369 S9B

369B 1.5 2 2.5 3456810

Ball End Hex L-Key Set in Holder. Manganese-phosphated, 9 pcs.

The ball end enables the user to work at angles up to 25°.

Order-No. 03879 3

369 H9B

369B 1.5 2 2.5 3456810

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (metric).

352

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L.

Order-No. 01201 4 1.5 91 15 10 01202 1 2 101 18 10 01203 8 2.5 113 20 10 01204 5 3 128 23 10 01206 9 4 142 29 10 01207 6 5 163 33 10 01208 3 6 184 38 10 01209 0 7 194 41 5 01210 6 8 206 44 10 01211 3 10 231 50 5 01212 0 12 259 57 5 01213 7 14 291 70 5 01214 4 17 333 80 5 01215 1 19 375 89 5

Hex L-Key, Long.

For Allen screws (metric).

352 H9

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L. Extra: Thanks to its compact dimensions, this holder fits easily into every ruler

Order-No. 01222 9

Hex L-Key Set in Holder. Nickel-plated, 9 pcs.

pocket. Popular key sizes kept in a well-organised holder.

352 H9

352 1.5 2 2.5 3456810

352 S9

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L. Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 07181 3

Hex L-Key Set in ProStar. Nickel-plated, 9 pcs.

any others.

352 S9

352 1.5 2 2.5 3456810

352 H7

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L. Extra: Popular key sizes kept in a well-organised holder.

Order-No. 01220 5

352 B8

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L. Extra: Large, impact resistant sliding box.

Order-No. 01216 8

Hex L-Key Set in Holder. Nickel-plated, 7 pcs.

352 H7

352 1.5 2 2.5 3456

Hex L-Key Set in Sliding Box. Nickel-plated, 8 pcs.

352 B8

352 2 2.5 3456810

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (metric).

352B

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: Based on ISO 2936L.

Order-No. 06358 0 0.7 67 65 06359 7 0.9 70 9 5 06360 3 1.3 80 13 5 06059 6 1.5 91 15 5 06361 0 2 101 18 5 06362 7 2.5 113 20 5 06363 4 3 128 23 5 06364 1 4 142 29 10 06365 8 5 163 33 10 06366 5 6 184 38 10 06367 2 7 194 41 5 06368 9 8 206 44 10 06369 6 10 231 50 5 06370 2 12 259 57 5 06371 9 14 291 70 5

Hex L-Key, Long.

For Allen screws (metric).

351

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L.

Order-No. 01144 4 1.5 46 15 10 01145 1 2 51 18 10 01146 8 2.5 57 20 10 01147 5 3 64 23 10 01148 2 3.5 70 26 5 01149 9 4 72 29 10 01150 5 4.5 80 31 5 01151 2 5 83 33 10 01152 9 5.5 90 35 5 01153 6 6 94 38 10 01154 3 7 99 41 5 01155 0 8 105 44 10 01156 7 9 114 47 5 01157 4 10 119 50 5 01158 1 11 129 53 5 01159 8 12 134 57 5 01160 4 14 151 70 5 01161 1 17 173 80 5 01162 8 19 195 89 5

Hex L-Key, Short.

352 H9B

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: Based on ISO 2936L. Extra: Popular key sizes kept in a well-organised holder.

Order-No. 06386 3

352 HM7B

Order-No. 06385 6

352 HM5B

Order-No. 06382 5

Hex L-Key Set in Holder. Manganese-phosphated, 9 pcs.

352 H9B

352B 1.5 2 2.5 3456810

Hex L-Key Set in Holder. Manganese-phosphated, 7 pcs.

352 HM7B

352B 0.9 1.3 1.5 2 2.5 34

Hex L-Key Set in Holder. Manganese-phosphated, 5 pcs.

352 HM5B

352B 0.7 0.9 1.3 1.5 2

351 H9

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L. Extra: Thanks to its compact dimensions, this holder fits easily into every ruler

Order-No. 01174 1

Hex L-Key Set in Holder. Nickel-plated, 9 pcs.

pocket. Popular key sizes kept in a well-organised holder.

351 H9

351 1.5 2 2.5 3456810

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (metric).

351 H7

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ISO 2936L. Extra: Popular key sizes kept in a well-organised holder.

Order-No. 01172 7

351 B8

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: ISO 2936K. Extra: Small, impact resistant sliding box.

Order-No. 01166 6

Hex L-Key Set in Holder. Nickel-plated, 7 pcs.

351 H7

351 1.5 2 2.5 3456

Hex L-Key Set in Sliding Box. Nickel-plated, 8 pcs.

351 B8

351 2 2.5 3456810

For Allen screws (metric).

350

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: ISO 2936K.

Order-No. 06218 7 1.3 41 13 10 01121 5 1.5 46 15 10 01122 2 2 51 18 10 01123 9 2.5 57 20 10 01124 6 3 64 23 10 01126 0 4 72 29 10 01128 4 5 83 33 10 01130 7 6 94 38 10 01131 4 7 99 41 10 01132 1 8 105 44 10 01133 8 9 112 47 5 01134 5 10 119 50 5 01135 2 11 126 53 5 01136 9 12 134 57 5 01137 6 14 151 70 5 01138 3 17 173 80 5 01139 0 19 195 89 5 01140 6 22 217 102 1 01141 3 24 241 114 1 01142 0 27 271 127 1 01143 7 32 339 157 1

Hex L-Key, Short.

359

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: DIN 6911. Application: Fits hex socket screws with low head and centre hole. With key guidance

Order-No. 01255 7 3 64 23 10 01256 4 4 72 29 10 01257 1 5 83 33 10 01258 8 6 94 38 10 01259 5 8 105 44 10 01260 1 10 119 50 5 01261 8 12 134 57 5 01262 5 14 151 70 5 01263 2 17 173 80 5

Hex L-Key with Pivot.

according to DIN 6912.

350 H9

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: ISO 2936K. Extra: Popular key sizes kept in a well-organised holder.

Order-No. 06379 5

Hex L-Key Set in Holder. Manganese-phosphated, 9 pcs.

350 H9

350 1.5 2 2.5 3456810

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (inch).

369 Zoll

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: ASME B18.3. Application: Especially for inch-sized screws that are difficult to access. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 01422 3 0.05 72 13 1.27 10 01423 0 1/16 80 15 1.59 10 01431 5 5/64 88 18 1.98 10 01427 8 3/32 101 20 2.38 10 01433 9 7/64 111 21 2.78 10 01425 4 1/8 121 23 3.18 10 01434 6 9/64 136 27 3.57 10 01430 8 5/32 148 29 3.97 10 01426 1 3/16 163 33 4.76 10 01432 2 7/32 176 36 5.56 10 01424 7 1/4 191 38 6.35 10 01429 2 5/16 210 43 7.94 10 01428 5 3/8 232 50 9.53 5

Ball End Hex L-Key, Long. Inch Sizes.

For Allen screws ( inch).

369 HZ8

Order-No. 01420 9

Ball End Hex L-Key Set in Holder. Manganese-phosphated, 8 pcs. Inch Sizes.

369 HZ8

369 Zoll 5/64 3/32 1/8 5/32 3/16

7/32 1/4 5/16

369 SZ13B

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Standards: ASME B18.3. Application: Especially for inch-sized screws that are difficult to access. Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 24189 6

Ball End Hex L-Key Set in ProStar. Manganese-phosphated, 13 pcs. Inch Sizes.

any others.

369 SZ13B

369 Zoll 0.05 1/16 5/64 3/32 7/64 1/8

9/64 5/32 3/16 7/32 1/4 5/16 3/8

351 Zoll

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ASME B18.3. Application: For all popular inch screws.

Order-No. 25626 5 0.05 41 13 1.27 10 01184 0 1/16 47 16 1.59 10 01194 9 5/64 51 18 1.98 10 01189 5 3/32 55 22 2.38 10 22406 6 7/64 58 21 2.78 10 01187 1 1/8 61 23 3.18 10 01200 7 9/64 65 25 3.57 10 01193 2 5/32 72 29 3.97 10 01188 8 3/16 76 30 4.76 10 01197 0 7/32 84 34 5.56 10 01186 4 1/4 94 37 6.35 10 01192 5 5/16 106 43 7.94 10 01191 8 3/8 117 48 9.53 5 01185 7 1/2 143 59 12.70 5 01198 7 9/16 158 64 14.29 5 01195 6 5/8 176 71 15.88 5 01190 1 3/4 198 89 19.05 5

Hex L-Key, Short. Inch Sizes.

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws ( inch). For Allen screws (metric).

351 SZ13

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ASME B18.3. Application: For all popular inch screws. Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No. 25610 4

351 HZ8

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Standards: Based on ASME B18.3. Application: For all popular inch screws. Extra: Popular key sizes kept in a well-organised holder.

Hex L-Key Set in ProStar. Nickel-plated, 13 pcs. Inch Sizes.

any others.

351 SZ13

351 Zoll 0.05 1/16 5/64 3/32 7/64 1/8

9/64 5/32 3/16 7/32 1/4 5/16 3/8

Hex L-Key Set in Holder. Nickel-plated, 8 pcs. Inch Sizes.

334DS

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha ComfortGrip, the comfortable multi-component T-handle with soft

Application: For comfortable high torque transfer. Especially useful for loosening or

Extra: One piece blade, through the handle withstands even the highest

Order-No. 26164 1 2 100 13 80 26 10 26165 8 2.5 100 13 80 26 10 26166 5 3 100 13 80 26 10 26167 2 4 150 13 80 26 10 26168 9 5 150 17 100 32 10 26169 6 6 150 17 100 32 10 26170 2 8 200 17 100 32 10 26171 9 10 200 22 120 38 10

Hex Driver with ComfortGrip. With Side Blade.

zones for maximum working comfort.

tightening screws that are hard to move.

stresses.

For Allen screws (metric).

Order-No. 01176 5

351 HZ8

351 Zoll 5/64 3/32 1/8 5/32 3/16

7/32 1/4 5/16

334DS K6

Order-No. 26247 1

Hex Driver Set with ComfortGrip. Blister Packed, 6 pcs.

334DS K6

334DS 2.5 34568

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Allen screws (metric).

334

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort.

Order-No. 00904 5 2 100 - 126 80 26 10 00905 2 2 200 - 226 80 26 10 00906 9 2.5 100 - 126 80 26 10 00907 6 2.5 200 - 226 80 26 10 00908 3 3 100 - 126 80 26 10 00909 0 3 150 - 176 80 26 10 00910 6 3 200 - 226 80 26 10 00911 3 3 350 5+ 382 100 32 10 00912 0 4 100 - 126 80 26 10 00913 7 4 150 - 176 80 26 10 00914 4 4 200 - 226 80 26 10 00915 1 4 350 5+ 382 100 32 10 00916 8 5 100 - 132 100 32 10 00917 5 5 150 - 182 100 32 10 00918 2 5 200 - 232 100 32 10 00919 9 5 350 - 382 100 32 10 00921 2 6 100 - 132 100 32 10 00922 9 6 150 - 182 100 32 10 00923 6 6 200 - 232 100 32 10 00924 3 6 350 - 382 100 32 10 00926 7 7 200 - 232 100 32 10 00928 1 8 100 - 132 100 32 10 00929 8 8 150 - 182 100 32 10 00930 4 8 200 - 232 100 32 10 00931 1 8 350 - 372 100 32 10 00933 5 10 100 - 138 120 38 10 00934 2 10 200 - 238 120 38 10 00937 3 12 200 - 238 120 38 5

+ Overlength with reinforced blade.

Hex Driver with T-Handle.

For Allen screws (metric).

331

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha key handle. Application: For high torque transfer with small screws, especially when replacing

Order-No. 00894 9 1.5 60 95 40 10 00895 6 2 60 95 40 10 00896 3 2.5 60 95 40 10 00897 0 3 60 95 40 10

Hex Driver with Key Handle.

indexable inserts on milling heads.

334 VB

Blade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: Robust metal workbench holder to place on workbench or wall-mount.

Order-No. Series 00953 3

Hex Driver Set with T-Handle. In Bench Stand, 7 pcs.

Tip diagrams printed to scale.

334 VB

334 2x100 2,5x100 3x100 4x150

5x150 6x200 8x200

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Hex Socket Screws. For Hex Socket Screws.

367

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: For all screws that are difficult to access. Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 26303 4 1.5 75 179 23 10 26304 1 2 100 204 23 10 26305 8 2.5 100 204 23 10 26328 7 3 100 204 23 10 26329 4 4 100 211 30 10 26330 0 5 100 211 30 10 26331 7 6 125 243 36 10 26332 4 8 150 268 36 10 26333 1 10 150 271 41 5 26307 2 12 150 271 41 5

356

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

SoftFinish®Ball End Hex Screwdriver. Hex Blade.

multi-component handle with roll-off

protection.

SoftFinish®Hex Screwdriver. Hex Blade.

multi-component handle with roll-off

protection.

357

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish

Application: Ideal for high-torque applications, e.g. in workshops.

Order-No. 26230 3 3 35 20 139 23 10 26231 0 4 40 25 151 30 10 26232 7 5 45 28 156 30 10 26233 4 6 50 32 168 36 10 26234 1 8 60 36 178 36 10 26235 8 10 70 40 199 41 10

SoftFinish®Offset Hex Screwdriver. Hex Blade.

multi-component handle with roll-off

protection.

Order-No. 32264 9 1.5 60 164 23 10 32265 6 2.0 60 164 23 10 26190 0 2.5 75 179 23 10 26191 7 3 75 179 23 10 26192 4 4 75 186 30 10 26193 1 5 75 186 30 10 26194 8 6 100 218 36 10 26195 5 8 100 218 36 10

Wiha hexagon tools.

Ingenious Solution for Everyday Use.

For Hex Socket Screws.

263P

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Ideal for high-precision work with electro-technical and precision

Order-No. 00519 1 0.7 40 0.028 134 9 10 00520 7 0.9 40 0.035 134 9 10 00521 4 1.3 40 0.05 134 9 10 00522 1 1.5 50 - 144 9 10 00523 8 2.0 50 5/64 150 18 10 00524 5 2.5 60 - 160 18 10 00525 2 3.0 60 - 160 18 10

263P Zoll

Order-No. 00526 9 1/16 50 144 9 10 00528 3 3/32 60 160 18 10 00530 6 7/64 60 160 18 10 00527 6 1/8 60 160 18 10

PicoFinish Hex Screwdriver. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

components.

PicoFinish Hex Screwdriver. Inch Sizes. Handle with Rotating Cap and Rapid-turning Zone.

finish on tip for a perfect fit every time.

Ball End Hex L-Key Set.

264P K6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Ideal for high-precision work with electro-technical and precision

Extra: Practical plastic rack with hanging holes.

Order-No. Series 00536 8

PicoFinish Ball End Hex Screwdriver Set, 6 pcs. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

components.

The ball end enables the user to work at angles up to 25°.

264P K6

263P 0.9x40 264P 1.3x40 1.5x50 2.0x50 2.5x60 3.0x60

finish on tip for a perfect fit every time.

264P

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Ideal for high-precision work with electro-technical and precision

Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 00531 5 1.3 40 134 0.05 9 10 00532 0 1.5 50 150 - 18 10 00533 7 2.0 50 150 - 18 10 00534 4 2.5 60 160 - 18 10 00535 1 3.0 60 160 - 18 10

264P Zoll

Order-No. 00537 5 1/16 50 150 18 10 00541 2 5/64 50 150 18 10 00539 9 3/32 50 150 18 10 00542 9 7/64 60 160 18 10 00538 2 1/8 60 160 18 10 00543 6 9/64 60 160 18 10 00540 5 5/32 60 160 18 10

PicoFinish Ball End Hex Screwdriver. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

components.

PicoFinish Ball End Hex Screwdriver. Inch Sizes. Handle with Rotating Cap and Rapid-turning Zone.

finish on tip for a perfect fit every time.

Wiha Info

Ergonomics.

Minimise the stress to your body by working with ergonomically designed tools! Wiha's ergonomically designed hand tools improve operator comfort, reduce injuries and increase productivity.

Wiha TORX®MagicSpring®.

Holds TORX®Screws Securely in Place.

Wiha TORX®-Tools with MagicSpring

• MagicSpring

stainless steel gets a firm hold on every

TORX

or TORX PLUS®screw

• Ideal for areas that are difficult to access

• Made of high-quality materials in the renowned Wiha quality

• Also suitable for TORX screws made of aluminium, stainless steel, plastic and titanium

retaining spring made of

or TORX PLUS

TORX

MagicSpring®L-key. Page 19

• Blade made of chromevanadium steel, through hardened, chrome-plated

Wiha

Hex Driver with T-Handle.

• High torque transmission thanks to ergonomic handle

• The angled blade end is injection-moulded into the T-handle and non detachable

Wiha Flag and Key Hadle. Page 20

• Large support areas for thumb and indexfinger on the ergonomically shaped handles

• Cylindricalhandle shaft for quickturning of screws

• The ball end enables the user to work at angles up to 25°

• Based on ISO 2936L

Page 19

• Hanging hole for workshop storage

• Made of high-quality plastic

• Innovative torsion blade greatly reduces the riskof breakage

• Even covered screws in the screw axis can be turned

Wiha SoftFinish

• Ergonomic Wiha SoftFinish multi-component handle

• Ergonomically perfect handle design

and Wiha PicoFinish. Page 21

• Ideal for all fine, filigree applications in electronics and precision-mechanics applications

• Wiha ChromTop a secure hold in the screw head

tip guarantees

Wiha TORX®MagicSpring®.

Holds TORX®Screws Securely in Place.

For TORX®-

N E W

366R

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For setting and tightening TORX

Order-No. 31233 6 T6 80 15 1/16 10 31234 3 T7 88 18 5/64 10 31235 0 T8 101 20 3/32 10 31236 7 T9 111 21 7/64 10 31237 4 T10 121 23 1/8 10 31238 1 T15 136 27 9/64 10 31239 8 T20 148 29 5/32 10 31240 4 T25 163 33 3/16 10 31241 1 T27 176 36 7/32 10 31242 8 T30 191 38 1/4 10 31243 5 T40 210 43 5/16 10 31244 2 T45 232 50 3/8 10

Screws

TORX®MagicSpring®L-key, Long. Retaining Spring holds TORX®Screws in Place.

screws in difficult to access areas.

For TORX®-

364R

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: MagicSpring

Order-No. 27964 6 T9 100 4.0 126 80 26 10 27965 3 T10 100 4.0 126 80 26 10 27966 0 T15 100 4.0 126 80 26 10 27967 7 T20 100 4.0 132 100 32 10 27968 4 T25 100 5.0 132 100 32 10 27969 1 T27 100 6.0 132 100 32 10 27970 7 T30 100 6.0 132 100 32 10 27971 4 T40 100 8.0 132 100 32 10

Screws

TORX®Driver with T-Handle. With MagicSpring®.

various angles. ChromTop®blade tip for the highest accuracy. Blade made of hexagonal material is particularly capable of withstanding stress.

made of stainless steel holds TORX®screws tight at

N E W

366R SZ13

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For setting and tightening TORX Extra: Makes simple removal of each individual key possible without movement

Order-No. 31492 7

TORX®MagicSpring®L-key Set in ProStar, 13 pcs. Retaining Spring holds TORX®Screws in Place.

screws in difficult to access areas.

of the others.

366R SZ13

366 T5 366R T6 T7 T8 T9 T10 T15

T20 T25 T27 T30 T40 T45

Wiha’s MagicSpring stainless steel spring reliably holds

TORX®or TORX PLUS®screws in place.

The retaining spring is a completely new technical solution that, together with a thin cover disc, is laser-welded to the tip of the blade.

Wiha TORX®MagicSpring®.

Holds TORX®Screws Securely in Place.

For TORX®Screws.

365R

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha key handle. Application: For high torque transfer with small screws, especially when replacing

Extra: MagicSpring

Order-No. 27972 1 T6 35 2.0 70 40 10 27973 8 T7 35 2.5 70 40 10 27974 5 T8 40 2.5 75 40 10 27975 2 T9 40 3.0 75 40 10 27976 9 T10 40 3.0 75 40 10 27977 6 T15 45 3.5 80 40 10 27978 3 T20 45 4.0 80 40 10

TORX®Driver with Key Handle. With MagicSpring®.

indexable inserts on milling heads.

angles.

made of stainless steel holds TORX®screws tight at various

For TORX®Screws.

370R

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha flag handle. Application: For high torque transfer with small screws, especially when replacing

Extra: MagicSpring

Order-No. 27979 0 T6 35 2.0 62 15 10 27980 6 T7 35 2.5 67 19 10 27981 3 T8 40 2.5 72 19 10 27982 0 T9 40 3,0 74 24 10 27983 7 T10 40 3.0 74 24 10 27984 4 T15 45 3.5 80 28 10 27985 1 T20 45 4.0 80 28 10

TORX®Driver with Flag Handle. With MagicSpring®.

indexable inserts on milling heads.

angles.

made of stainless steel holds TORX®screws tight at various

Wiha Info

TORX®MagicSpring®.

Simply ingenious – the TORX MagicSpring®screwdriver from Wiha. Because of the "MagicSpring

" retaining spring made of stainless steel, TORX screws are held securely in place. An innovation, which will convince each user.

Wiha TORX®MagicSpring®.

Holds TORX®Screws Securely in Place.

For TORX®Screws.

362R

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: For setting and tightening TORX®screws in difficult to access areas.

Order-No. 27736 9 T6 60 3.5 164 23 10 27737 6 T7 60 3.5 164 23 10 27738 3 T8 60 3.5 164 23 10 27739 0 T9 60 4.0 171 30 10 27740 6 T10 80 4,0 191 30 10 27741 3 T15 80 4.0 191 30 10 27742 0 T20 100 4.0 218 36 10 27743 7 T25 100 4.5 218 36 10 27811 3 T27 115 5.5 233 36 10 27744 4 T30 115 6.0 233 36 10 27745 1 T40 130 7.0 254 41 10

SoftFinish®TORX®MagicSpring®Screwdriver. Retaining Spring holds TORX®Screws in Place.

chrome-plated. Wiha ChromTop

protection.

finish on tip for a perfect fit every time.

For TORX®Screws.

267PR

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: For setting and tightening TORX®screws in difficult to access areas.

Order-No. 27729 1 T6 40 2.5 140 18 10 27730 7 T7 40 2.5 140 18 10 27731 4 T8 40 2.5 140 18 10 27732 1 T9 50 3.0 150 18 10 27733 8 T10 50 3.0 150 18 10 27734 5 T15 60 3.5 160 18 10

PicoFinish TORX®MagicSpring®Screwdriver. Handle with Rotating Cap and Rapid-turning Zone. Retaining Spring holds TORX®Screws in Place.

chrome-plated. Wiha ChromTop

finish on tip for a perfect fit every time.

362R K6 SO

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: For setting and tightening TORX®screws in difficult to access areas.

Order-No. Series 27746 8

SoftFinish®TORX®MagicSpring®Screwdriver Set, 6 pcs. Retaining Spring holds TORX®Screws in Place.

chrome-plated. Wiha ChromTop

protection.

362R K6 SO

362R T10x80 T15x80 T20x100 T25x100

finish on tip for a perfect fit every time.

T30x115 T40x130

267PR K6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: For setting and tightening TORX®screws in difficult to access areas. Extra: Practical plastic rack with hanging holes.

Order-No. Series 27747 5

PicoFinish TORX®MagicSpring®Screwdriver Set, 6 pcs. Handle with Rotating Cap and Rapid-turning Zone. Retaining Spring holds TORX®Screws in Place.

chrome-plated. Wiha ChromTop

267PR K6

267PR T6x40 T7x40 T8x40

finish on tip for a perfect fit every time.

T9x50 T10x50 T15x60

Wiha TORX®Tools.

• The vertical TORX disadvantages of other drives: the drive surfaces are vertically oriented to avoid back thrust

• The large drive surfaces ensure optimal transmission of force – even very high torques can be transmitted without damage to the tool head

• The wave profile eases application of the tool

profile does not have the

Wiha TORX

• Blade made of chromevanadium steel, through hardened, chrome-plated

• Based on ISO 2936L

Ball End L-key. Page 23 - 25

• Especially for hard-to-reach locations

• Ball End enables screwing in and out at angles of 25°

Wiha

Hex Driver with T-Handle.

• High torque transmission thanks to ergonomic handle

• The angled blade end is injection-moulded into the T-handle and non detachable

Wiha Flag and Key Hadle. Page 26

• Large support areas for thumb and indexfinger on the ergonomically shaped handles

• Cylindricalhandle shaft for quickturning of screws

Wiha SoftFinish

• Ergonomic Wiha SoftFinish multi-component handle

• Ergonomically perfect handle design and user comfort

and Wiha PicoFinish. Page 27 - 29

maximum

• Made of high-quality plastic

• Innovative torsion blade greatly reduces the riskof breakage

• Even covered screws in the screw axis can be turned

• Ideal for all fine, filigree applications in electronics and precision-mechanics applications

• Wiha ChromTop a secure hold in the screw head

Page 27

tip guarantees

Wiha Standard Bit and Wiha TORX

• Robust and powerful allrounder bits for trade, industry and DIY

• Suitable for all applications. It can be used for both manual and machine applications

AutoFit Bit. Page 30 - 31

Reduces working times

• by up to 20 %

•

Lower process costs

•

Extended tool life

Wiha TORX®Tools.

For TORX®Screws.

N E W

366BE

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all hard-to-reach TORX Extra: The TORX®ball end enables screwing at an angle of up to 25°.

Order-No. 32386 8 T9 111 21 7/64 10 32387 5 T10 121 23 1/8 10 32388 2 T15 136 27 9/64 10 32389 9 T20 148 29 5/32 10 32390 5 T25 163 33 3/16 10 32391 2 T27 176 36 7/32 10 32392 9 T30 191 38 1/4 10 32393 6 T40 210 43 5/16 10

TORX®Ball End L-key, Long.

screws.

For TORX®Screws.

366

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX

Order-No. 24313 5 T5 72 13 0.05 10 24314 2 T6 80 15 1/16 10 24315 9 T7 88 18 5/64 10 24316 6 T8 101 20 3/32 10 24317 3 T9 111 21 7/64 10 24318 0 T10 121 23 1/8 10 24319 7 T15 136 27 9/64 10 24320 3 T20 148 29 5/32 10 24321 0 T25 163 33 3/16 10 24322 7 T27 176 36 7/32 10 24323 4 T30 191 38 1/4 10 24324 1 T40 210 43 5/16 10 24325 8 T50 232 50 3/8 10

TORX®L-Key, Long.

screw applications.

N E W

366BE H8

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all hard-to-reach TORX Extra: The TORX®ball end enables screwing at an angle of up to 25°.

Order-No. 32394 3

TORX®Ball End L-key Set in Holder, 8 pcs.

screws.

366BE H8

366BE T9 T10 T15 T20 T25

T27 T30 T40

Wiha TORX®Ball End geometry:

• Enables screwing in and out at angles of 25°

• Simple insertion of the tool/bit and screwing in and out, especially in hard-to-reach locations

366 SZ13

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX Extra: Space saving ProStar allows the easy removal of each key without moving

Order-No.

24312 8

Plenty of room to manoeuvre: The ball end enables access to the TORX

TORX®L-Key Set in ProStar. Manganese-phosphated, 13 pcs.

screw applications.

any others. All keys from T5 to T50 in one set.

366 SZ13

366 T5 T6 T7 T8 T9

T10 T15 T20 T25 T27 T30 T40 T50

screw at an angle of up to 25°.

Wiha TORX®tools.

For TORX®Screws.

363

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX

Order-No. 03764 2 T5 39 18 2.5 10 01310 3 T6 41 18 2.5 10 01311 0 T7 44 18 2,5 10 01312 7 T8 47 18 2.5 10 01313 4 T9 51 19 3.0 10 01314 1 T10 54 20 3.0 10 01315 8 T15 57 22 3.5 10 01316 5 T20 62 23 4.0 10 01317 2 T25 67 25 4.5 10 01318 9 T27 72 27 5.5 10 01319 6 T30 79 30 6.0 10 01320 2 T40 86 33 7.0 10 01321 9 T45 90 36 8.0 10 01322 6 T50 104 41 9.0 10 01323 3 T55 120 47 12.0 10 01324 0 T60 134 52 14.0 10

TORX®L-Key, Short.

screw applications in confined work spaces.

For TORX®Screws.

363 H9

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX Extra: Popular key sizes kept in a well-organised holder.

Order-No. 06376 4

363 HM7

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX Extra: Popular key sizes kept in a well-organised holder.

TORX®L-Key Set in Holder. Manganese-phosphated, 9 pcs.

screw applications in confined work spaces.

363 H9

363 T8 T9 T10 T15 T20 T25 T27 T30 T40

TORX®L-Key Set in Holder. Manganese-phosphated, 7 pcs.

screw applications in confined work spaces.

363 VB

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX Extra: Robust metal workbench holder to place on workbench or wall-mount.

Order-No.. 01326 4

TORX®L-Key Set in Bench Stand. Manganese-phosphated, 9 pcs.

screw applications in confined work spaces.

Tip diagrams printed to scale.

363 VB

363 T10 T15 T20 T25 T30

T40 T50 T55 T60

Order-No. 06375 7

363 H6

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX Extra: Popular key sizes kept in a well-organised holder.

Order-No. 06374 0

363 HM7

363 T6 T7 T8 T9 T10 T15 T20

TORX®L-Key Set in Holder. Manganese-phosphated, 6 pcs.

screw applications in confined work spaces.

363 H6

363 T15 T20 T25 T27 T30 T40

Wiha TORX®tools.

For TORX®Tamper Resistant screws.

363TR

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For popular TORX Extra: Borehole in every blade tip.

Order-No. 24105 6 T7H 44 18 2.5 10 24107 0 T8H 47 18 2.5 10 24109 4 T9H 51 19 3.0 10 24111 7 T10H 54 20 3.0 10 24113 1 T15H 57 22 3.5 10 24115 5 T20H 62 23 4.0 10 24117 9 T25H 67 25 4.5 10 24119 3 T27H 72 27 5.5 10 24121 6 T30H 79 30 6.0 10 24123 0 T40H 86 33 7.0 10

TORX®Tamper Resistant L-Key, Short.

Tamper Resistant screws (with security pin).

For TORX®Screws.

364DS

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha ComfortGrip, the comfortable multi-component T-handle with soft

Application: For comfortable high torque transfer. Especially useful for loosening or

Extra: One piece blade, through the handle withstands even the highest

Order-No. 26172 6 T10 100 13 80 26 10 26173 3 T15 100 13 80 26 10 26174 0 T20 100 17 100 32 10 26175 7 T25 150 17 100 32 10 26176 4 T27 150 17 100 32 10 26177 1 T30 150 17 100 32 10 26178 8 T40 150 17 100 32 10

TORX®Driver with ComfortGrip. With Side Blade.

zones for maximum working comfort.

tightening screws that are hard to move.

stresses. ChromTop

blade tip for the highest accuracy at both ends.

363TR H9

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For popular TORX Extra: Popular key sizes kept in a well-organised holder.

Order-No. 25608 1

TORX®Tamper Resistant L-Key Set in Holder. Manganese-phosphated, 9 pcs.

Tamper Resistant screws (with security pin).

Borehole in every blade tip.

363TR H9

363TR T8H T9H T10H T15H T20H

T25H T27H T30H T40H

364DS K6

Order-No. 26248 8

TORX®Driver Set with ComfortGrip. Blister Packed, 6 pcs.

364DS K6

364DS T10 T15 T20 T25 T30 T40

Wiha TORX®tools.

For TORX®Screws.

364

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: ChromTop

Order-No. 01328 8 T9 100 4.0 126 80 26 10 01329 5 T10 100 4.0 126 80 26 10 01330 1 T15 100 4.0 126 80 26 10 01331 8 T15 200 5.5 226 80 26 10 01332 5 T20 100 4.0 132 100 32 10 01333 2 T20 200 5.5 232 100 32 10 01334 9 T25 100 4.5 132 100 32 10 01335 6 T25 200 5.5 232 100 32 10 01336 3 T27 100 5.5 132 100 32 10 01337 0 T27 200 5.5 232 100 32 10 01338 7 T30 100 6.0 132 100 32 10 01339 4 T30 200 6.0 232 100 32 10 01340 0 T40 100 7.0 132 100 32 10 01341 7 T40 200 7.0 232 100 32 10 01343 1 T45 250 8.0 288 120 38 10 01345 5 T50 250 9.0 288 120 38 10

TORX®Driver with T-Handle.

blade tip for the highest accuracy.

For TORX®Screws.

365

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha key handle. Application: For high torque transfer with small screws, especially when replacing

Order-No. 04918 8 T5 35 2.0 70 40 10 01350 9 T6 35 2.0 70 40 10 01351 6 T7 35 2.5 70 40 10 01352 3 T8 40 2.5 75 40 10 01353 0 T9 40 3.0 75 40 10 01354 7 T10 40 3.0 75 40 10 01355 4 T15 45 3.5 80 40 10 01356 1 T20 45 4.0 80 40 10

TORX®Driver with Key Handle.

indexable inserts on milling heads.

364 VB

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: ChromTop

Order-No. Series 01348 6

TORX®Driver Set with T-Handle. In Bench Stand, 7 pcs.

blade tip for the highest accuracy. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale.

364 VB

364 T10x100 T15x100 T20x100 T25x100

T30x100 T40x200 T50x250

365 VB

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha key handle. Application: For high torque transfer with small screws, especially when replacing

Extra: Small, robust metal workbench holder to stand on workbench.

Order-No. Series 25624 1

TORX®Screwdriver Set with Key Handle. In Small Bench Stand, 7 pcs.

indexable inserts on milling heads.

Tip diagrams printed to scale.

365 VB

365 T6x35 T7x35 T8x40 T9x40

T10x40 T15x45 T20x45

Wiha TORX®tools.

For TORX®Screws.

370

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha flag handle. Application: For high torque transfer with small screws, especially when replacing

Order-No. 03724 6 T5 35 2.0 67 15 10 03725 3 T6 35 2.0 67 15 10 03726 0 T7 35 2.5 67 19 10 03727 7 T8 40 2.5 72 19 10 03728 4 T9 40 3.0 74 24 10 03729 1 T10 40 3.0 74 24 10 03730 7 T15 45 3.5 80 28 10 03731 4 T20 45 4.0 80 28 10

TORX®Driver with Flag Handle.

indexable inserts on milling heads.

For TORX®Screws.

362

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: Especially for dry and general applications.

Order-No. 26259 4 T3 60 2.5 164 23 10 26260 0 T4 60 2.5 164 23 10 01285 4 T5 60 2.5 164 23 10 01286 1 T6 60 3.5 164 23 10 01287 8 T7 60 3.5 164 23 10 01288 5 T8 60 3.5 164 23 10 01289 2 T9 60 4.0 171 30 10 01290 8 T10 80 4.0 191 30 10 01291 5 T15 80 4.0 191 30 10 01292 2 T20 100 4.0 218 36 10 01293 9 T25 100 4.5 218 36 10 01294 6 T27 115 5.5 233 36 10 01295 3 T30 115 6.0 233 36 10 01296 0 T40 130 7.0 254 41 10 01297 7 T45 130 8.0 254 41 5

SoftFinish®TORX®Screwdriver. Round Blade.

chrome-plated. Wiha ChromTop

protection.

finish on tip for a perfect fit every time.

370 VB

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha flag handle. Application: For high torque transfer with small screws, especially when replacing

Extra: Small, robust metal workbench holder to stand on workbench.

Order-No. Series 25625 8

TORX®Driver Set with Flag Handle. In Small Bench Stand, 7 pcs.

indexable inserts on milling heads.

Tip diagrams printed to scale.

370 VB

370 T6x35 T7x35 T8x40 T9x40

T10x40 T15x45 T20x45

362 K6 SO

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: Especially for dry and general applications.

Order-No. Series 07155 4

362 K7

Order-No. Series 01299 1

SoftFinish®TORX®Screwdriver Set, 6 pcs. Round Blades.

chrome-plated. Wiha ChromTop

protection.

362 K6 SO

362 T10x80 T15x80 T20x100 T25x100

SoftFinish®TORX®Screwdriver Set, 7 pcs. Round Blades.

362 K7

362 T8x60 T9x60 T10x80 T15x80

finish on tip for a perfect fit every time.

T30x115 T40x130

T20x100 T25x100 T30x115

Wiha TORX®tools.

For TORX®Screws.

N E W

362BE

Blade: High-quality chrome-molybdenum steel, through-hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: For all hard-to-reach TORX®screws. Extra: The TORX®ball head enables screwing at an angle of up to 25°.

Order-No. 32250 2 T9 60 7/64 2.8 164 23 10 32251 9 T10 60 1/8 3.2 184 23 10 32252 6 T15 80 9/64 3.6 191 30 10 32253 3 T20 80 5/32 4.0 211 30 10 32254 0 T25 100 3/16 4.8 218 36 10 32255 7 T27 115 7/32 5.6 233 36 10 32256 4 T30 115 1/4 6.4 233 36 10

SoftFinish®TORX®Ball Head Screwdriver. Hex Blade.

chrome-plated. Wiha ChromTop

protection.

finish on tip for a perfect fit every time.

For TORX®and TORX®tamper resistant screws.

362TR

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Order-No. 03106 0 T7H 60 3.5 164 23 10 03107 7 T8H 60 3.5 164 23 10 03108 4 T9H 60 4.0 171 30 10 26456 7 T9H 300 4.0 411 30 5 01300 4 T10H 80 4.0 191 30 10 26457 4 T10H 300 4.0 411 30 5 01301 1 T15H 80 4.0 191 30 10 26458 1 T15H 300 4.0 411 30 5 01302 8 T20H 100 4.0 211 30 10 28005 5 T20H 300 4.0 411 30 5 01303 5 T25H 100 4.5 211 30 10 01304 2 T27H 115 5.5 233 36 10 01305 9 T30H 115 6.0 233 36 10 01306 6 T40H 130 7.0 254 41 10

SoftFinish®TORX®Tamper Resistant Screwdriver. With borehole in the blade tip. For TORX®Screws with Locking Pin.

chrome-plated. Wiha ChromTop With borehole in the blade tip.

protection.

finish on tip for a perfect fit every time.

N E W

362BE K6

Blade: High-quality chrome-molybdenum steel, through-hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: For all hard-to-reach TORX®screws. Extra: The TORX®ball head enables screwing at an angle of up to 25°.

Order-No. Series 32249 6

SoftFinish®TORX®ball head screwdriver set, 6 pcs. Hex Blade.

chrome-plated. Wiha ChromTop

protection.

362BE K6

362BE T9x60 T10x60 T15x80 T20x80

finish on tip for a perfect fit every time.

T25x100 T30x115

362TR K6

Order-No. Series 24506 1

SoftFinish®TORX®Tamper Resistant Screwdriver Set, 6 pcs. For TORX®Screws with Locking Pin.

362TR K6

362TR T10Hx80 T15Hx80 T20Hx100

T25Hx100 T30Hx115 T40Hx130

Wiha TORX®tools.

For TORX®Screws.

267P

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Ideal for high-precision work with electro-technical and precision

Order-No. 25673 9 T1 40 2.5 134 9 10 25674 6 T2 40 2.5 134 9 10 20122 7 T3 40 2.5 134 9 10 20123 4 T4 40 2.5 134 9 10 00566 5 T5 40 2.5 134 9 10 00567 2 T6 40 2.5 140 18 10 00568 9 T7 40 2.5 140 18 10 00569 6 T8 40 2.5 140 18 10 00570 2 T9 50 3.0 150 18 10 00571 9 T10 50 3.0 150 18 10 00572 6 T15 60 3.5 160 18 10 00573 3 T20 60 4.0 160 18 10

PicoFinish TORX®Screwdriver. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

components.

finish on tip for a perfect fit every time.

TORX®Sets.

267P K6M

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Profi set for mobile phones and electrical devices. Extra: Practical plastic rack with hanging holes.

Order-No. Series 24002 8

PicoFinish TORX®Screwdriver Set, 6 pcs. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

267P K6M

267P T4x40 T5x40 T6x40

finish on tip for a perfect fit every time.

T7x40 T8x40 T9x50

267P K6

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Ideal for high-precision work with electro-technical and precision

Extra: Practical plastic rack with hanging holes.

Order-No. Series 03765 9

PicoFinish TORX®Screwdriver Set, 6 pcs. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

components.

267P K6

267P T7x40 T8x40 T9x50

finish on tip for a perfect fit every time.

T10x50 T15x60 T20x60

Wiha TORX®tools.

Style E 6.3 (1/4").

N E U

7045 Z

Material: High grade chrome-vanadium steel, through hardened. Drive: DIN 3126, ISO 1173, Style E 6.3. Application: For all types of screw applications in trade and industry.

Order-No. 32299 1 T5 50 5 32302 8 T6 50 5 32303 5 T7 50 5 32304 2 T8 50 5 32305 9 T9 50 5 32306 6 T10 50 5 32307 3 T15 50 5 32308 0 T20 50 5 32309 7 T25 50 5

Standard Bit, TORX®, Style E 6.3.

Style E 6.3 (1/4").

7045 Z TR

Material: High grade chrome-vanadium steel, through hardened. Drive: DIN 3126, ISO 1173, Style E 6.3. Application: For all types of screw applications in trade and industry. Extra: Hole in the bit tip for TORX

Order-No. 21045 8 T7H 50 5 21047 2 T8H 50 5 20218 7 T9H 50 5 20219 4 T10H 50 5 24867 3 T15H 50 5 20220 0 T20H 50 5 20221 7 T25H 50 5 20222 4 T27H 50 5 20223 1 T30H 50 5 20224 8 T40H 50 5

Standard Bit, TORX®H, Style E 6.3.

Tamper Resistant security screws.

N E U

7045BE

Material: High grade chrome-vanadium steel, through hardened. Drive: DIN 3126, ISO 1173, Style E 6.3. Application: For all internal TORX Extra: The TORX®ball end enables screwing at an angle of up to 25°.

Order-No. 32409 4 T9 50 10 32410 0 T10 50 10 32416 2 T10 70 10 32417 9 T15 50 10 32418 6 T15 70 10 32411 7 T20 50 10 32419 3 T20 70 10 32420 9 T20 90 10 32412 4 T25 50 10 32421 6 T25 70 10 32422 3 T25 90 10 32413 1 T27 50 10 32414 8 T30 50 10 32423 0 T30 70 10 32424 7 T30 90 10 32415 5 T40 50 10

Standard bit, TORX®ball end, style E 6.3.

screws, especially in hard-to-reach places.

Wiha TORX®Ball End.

Plenty of room to manoeuvre: The ball end enables access to the TORX at an angle of up to 25°.

screw

Wiha TORX®tools.

Style E 6.3 - 1/4" hex and M4, M5.

7045 Z

Material: High grade chrome-vanadium steel, through hardened. Drive: DIN 3126, ISO 1173, Style E 6.3. Extra: Innovative geometry facilitates insertion into the screw and reduces the

Order-No. 25315 8 T5 50 5 01814 6 T6 50 5 01817 7 T7 50 5 01820 7 T8 50 5 01823 8 T9 50 5 01826 9 T10 50 5 01829 0 T15 50 5 01832 0 T20 50 5 01835 1 T25 50 5 01838 2 T27 50 5 01841 2 T30 50 5 01844 3 T40 50 5

Standard Bit, TORX®AutoFit, Style E 6.3.

amount of time to turn the screw.

Wiha TORX®AutoFit Bit:

Style E 6.3 (1/4").

7045 Z L

Material: High grade chrome-vanadium steel, through hardened. Drive: DIN 3126, ISO 1173, Style E 6.3. Extra: Overlength bits available in lengths of 70, 90, 110 and 150 mm.

Order-No. 01815 3 T6 70 5 01816 0 T6 90 5 01818 4 T7 70 5 01819 1 T7 90 5 01821 4 T8 70 5 01822 1 T8 90 5 01824 5 T9 70 5 01825 2 T9 90 5 01827 6 T10 70 5 01828 3 T10 90 5 23229 0 T10 110 5 23243 6 T10 150 5 01830 6 T15 70 5 01831 3 T15 90 5 23231 3 T15 110 5 23245 0 T15 150 5 01833 7 T20 70 5 01834 4 T20 90 5 23233 7 T20 110 5 23247 4 T20 150 5 01836 8 T25 70 5 01837 5 T25 90 5 23235 1 T25 110 5 23249 8 T25 150 5 01839 9 T27 70 5 01840 5 T27 90 5 01842 9 T30 70 5 01843 6 T30 90 5 23239 9 T30 110 5 23253 5 T30 150 5 01845 0 T40 70 5 01846 7 T40 90 5 23241 2 T40 110 5 23255 9 T40 150 5

Standard Bit, TORX®AutoFit, Style E 6.3.

Innovative geometry facilitates insertion into the screw and reduces the amount of time to turn the screw.

• Reduces working times by up to 20 %

• Lower process costs

• Extended tool life

• The "self-locating geometry" is only available from Wiha

Wiha TORX PLUS®MagicSpring®.

Holds TORX PLUS®Screws Securely in Place.

Wiha MagicSpring®.

• MagicSpring stainless steel gets a firm hold on every TORX or TORX PLUS®screw

• Ideal for areas that are difficult to access

• Made of high-quality materials in the renowned Wiha quality

• Also suitable for TORX made of aluminium, stainless steel, plastic and titanium

retaining spring made of

or TORX PLUS®screws

Wiha TORX

• Blade made of chromevanadium steel, through hardened, chrome-plated

Wiha SoftFinish

• Ergonomic Wiha SoftFinish multi-component handle

L-key with MagicSpring®. page 33

. page 33

• Especially for hard-to-reach locations

• Based on ISO 2936L

• Ergonomically perfect handle design and user comfort

maximum

Wiha TORX PLUS®MagicSpring®.

Holds TORX PLUS®Screws Securely in Place.

For TORX PLUS®Screws.

371RIP

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX PLUS Extra: MagicSpring®made from stainless steel holds TORX PLUS®-screws tight

Attention: TORX PLUS®keys cannot be used with TORX®screws.

Order-No. 29197 6 6IP 65 16 1/16 10 29198 3 7IP 71 18 5/64 10 29199 0 8IP 77 20 3/32 10 29200 3 9IP 83 22 7/64 10 29201 0 10IP 90 24 1/8 10 29202 7 15IP 97 26 9/64 10 29203 4 20IP 104 29 5/32 10 29204 1 25IP 112 33 3/16 10 29205 8 27IP 122 36 7/32 10 29206 5 30IP 132 40 1/4 10 29207 2 40IP 143 44 5/16 10

TORX PLUS®L-Key. With MagicSpring®.

screw tasks.

at various angles. The stronger profile of the TORX PLUS®tip allows up to 25 % extra torque than the TORX®profile.

For TORX PLUS®Screws.

362RIP

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish®multi-component handle with roll-off

Application: For setting and tightening TORX PLUS®-screws in hard to reach areas.

Order-No. 28760 3 6IP 60 3.5 164 23 10 28761 0 7IP 60 3.5 164 23 10 28762 7 8IP 60 3.5 164 23 10 28763 4 9IP 60 4.0 171 30 10 28764 1 10IP 80 4.0 191 30 10 28765 8 15IP 80 4.0 191 30 10 28766 5 20IP 100 4.0 218 36 10 28767 2 25IP 100 4.5 218 36 10 28768 9 27IP 115 5.5 233 36 10 28769 6 30IP 115 6.0 233 36 10 28770 2 40IP 130 7.0 254 41 10

SoftFinish®TORX PLUS®MagicSpring®Screwdriver. Retaining Spring holds TORX PLUS®Screws in Place.

chrome-plated. Wiha ChromTop

protection.

finish on tip for a perfect fit every time.

371RIP HM7

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX PLUS Extra: MagicSpring®made from stainless steel holds TORX PLUS®-screws tight

Order-No. 29208 9

TORX PLUS®L-Key Set in Holder. With MagicSpring®, manganese-phosphated, 7 pcs.

-screw tasks.

at various angles. Popular key sizes kept in a well-organised holder.

371RIP HM7

371RIP 6IP 7IP 8IP 9IP 10IP

15IP 20IP

Wiha TORX PLUS®tools.

Wiha TORX PLUS®.

• The TORX PLUS so that the drive angle is almost 0°. This increases the contact surface and less radial forces are applied

• The larger section in the area of the cam surfaces means less wear and longer tool service life

• TORX PLUS

25 % more torque. With identical torque, the number of connections compared to the TORX system is increased

geometry has been designed

enables the transmission of up to

Wiha TORX PLUS

L-key. page 35

• Blade made of chromevanadium steel, through hardened, chrome-plated

Wiha TORX PLUS

• High torque transmission thanks to ergonomic handle

• The angled blade end is injection-moulded into the T-handle and non detachable

Wiha Flag and Key Hadle. page 35 - 36

• Large support areas for thumb and indexfinger on the ergonomically shaped handles

• Cylindricalhandle shaft for quickturning of screws

Hex Driver with T-Handle.

• Especially for hard-to-reach locations

• Based on ISO 2936L

page 35

• Hanging hole for workshop storage

• Made of high-quality plastic

• Innovative torsion blade greatly reduces the riskof breakage

• Even covered screws in the screw axis can be turned

Wiha SoftFinish

• Ergonomic Wiha SoftFinish multi-component handle

• Ergonomically perfect handle design and user comfort

and Wiha PicoFinish. page 36

maximum

• Ideal for all fine, filigree applications in electronics and precision-mechanics applications

• Wiha ChromTop a secure hold in the screw head

tip guarantees

Wiha TORX PLUS®tools.

For TORX PLUS®and XZN®multipoint socket screws.

361IP

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For popular TORX PLUS Extra: The stronger profile of the TORX PLUS®tip allows up to 25 % extra

Attention: TORX PLUS®keys cannot be used with TORX®screws.

Order-No. 24513 9 6IP 41 18 2.5 10 24515 3 7IP 44 18 2.5 10 24517 7 8IP 47 18 2.5 10 24519 1 9IP 51 19 3.0 10 24521 4 10IP 54 20 3.0 10 24523 8 15IP 58 22 3.5 10 24525 2 20IP 62 23 4.0 10 24527 6 25IP 67 25 4.5 10 24529 0 27IP 73 27 5.5 10 24531 3 30IP 79 30 6.0 10 24533 7 40IP 88 33 7.0 10

TORX PLUS®L-Key, Short.

screws.

torque than the TORX

profile.

For TORX PLUS®Screws.

364IP

Blade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha T-Handle. Application: For high torque transfer with minimal effort. Extra: The stronger profile of the TORX PLUS

Attention: TORX PLUS®keys cannot be used with TORX®screws.

Order-No. 26953 1 9IP 100 4.0 126 80 26 10 26954 8 10IP 100 4.0 126 80 26 10 26955 5 15IP 100 4.0 126 80 26 10 26956 2 20IP 100 4.0 132 100 32 10 26957 9 25IP 150 4.5 182 100 32 10 26958 6 27IP 150 5.5 182 100 32 10 26959 3 30IP 150 6.0 182 100 32 10 26960 9 40IP 150 7.0 182 100 32 10

TORX PLUS®Driver with T-Handle.

tip allows up to 25 % extra torque than the TORX®profile. ChromTop®blade tip for the highest accuracy.

361IP H9

Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For popular TORX PLUS Extra: Popular key sizes kept in a well-organised holder.

Attention: TORX PLUS®keys cannot be used with TORX®screws.

Order-No. 26246 4

TORX PLUS®L-Key Set in Holder. Manganese-phosphated, 9 pcs.

screws.

361IP H9

361IP 8IP 9IP 10IP 15IP 20IP

25IP 27IP 30IP 40IP

370IP

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha flag handle. Application: For high torque transfer with small screws, especially when replacing

Extra: The stronger profile of the TORX PLUS

Attention: TORX PLUS®keys cannot be used with TORX®screws.

Order-No. 27614 0 5IP 35 2.0 67 15 10 27615 7 6IP 35 2.0 67 15 10 27616 4 7IP 35 2.5 67 19 10 27617 1 8IP 40 2.5 72 19 10 27618 8 9IP 40 3.0 74 24 10 27619 5 10IP 40 3.0 74 24 10 27620 1 15IP 45 3.5 80 28 10 27621 8 20IP 45 4.0 80 28 10

TORX PLUS®Driver with Flag Handle.

indexable inserts on milling heads.

torque than the TORX®profile.

tip allows up to 25 % extra

Wiha TORX PLUS®tools.

For TORX PLUS®Screws.

365IP

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha key handle. Application: For high torque transfer with small screws, especially when replacing

Extra: The stronger profile of the TORX PLUS

Attention: TORX PLUS®keys cannot be used with TORX®screws.

Order-No. 26181 8 5IP 35 2.0 70 40 10 26182 5 6IP 35 2.0 70 40 10 26183 2 7IP 35 2.5 70 40 10 26184 9 8IP 40 2.5 75 40 10 26185 6 9IP 40 3.0 75 40 10 26186 3 10IP 40 3.0 75 40 10 26187 0 15IP 45 3.5 80 40 10 26188 7 20IP 45 4.0 80 40 10

TORX PLUS®Driver with Key Handle.

indexable inserts on milling heads.

torque than the TORX®profile.

tip allows up to 25 % extra

For TORX PLUS®Screws.

362IP

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Ergonomic Wiha SoftFinish

Application: Especially for dry and general applications.

Order-No. 26091 0 6IP 60 3.5 164 23 10 26093 4 7IP 60 3.5 164 23 10 26095 8 8IP 60 3.5 164 23 10 26097 2 9IP 60 4.0 171 30 10 26099 6 10IP 80 4.0 191 30 10 26101 6 15IP 80 4.0 191 30 10 26103 0 20IP 100 4.0 218 36 10 26105 4 25IP 100 4.5 218 36 10 26107 8 27IP 115 5.5 233 36 10 26109 2 30IP 115 6.0 233 36 10 26111 5 40IP 130 7.0 254 41 10

SoftFinish®TORX PLUS®Screwdriver. Round Blade.

chrome-plated. Wiha ChromTop

protection.

finish on tip for a perfect fit every time.

multi-component handle with roll-off

365IP VB

Blade: Chrome-vanadium steel, through hardened, black-finish. Handle: Wiha key handle. Application: For high torque transfer with small screws, especially when replacing

Extra: Small, robust metal workbench holder to stand on workbench.

Order-No. Series 26261 7

TORX PLUS®Driver Set with Key Handle. In Small Bench Stand, 7 pcs.

indexable inserts on milling heads.

Tip diagrams printed to scale.

365IP VB

365IP 6IPx35 7IPx35 8IPx40 9IPx40

10IPx40 15IPx45 20IPx45

267PIP

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Handle: Wiha PicoFinish handle for rapid rotation. Application: Ideal for high-precision work with electro-technical and precision

Order-No. 29100 6 4IP 40 2.5 134 9 10 29101 3 5IP 40 2.5 134 9 10 29102 0 6IP 40 2.5 140 18 10 29103 7 7IP 40 2.5 140 18 10 29104 4 8IP 40 2.5 140 18 10 29105 1 9IP 50 3.0 150 18 10 29106 8 10IP 50 3.0 150 18 10 29107 5 15IP 60 3.5 160 18 10 29108 2 20IP 60 4.0 160 18 10

PicoFinish TORX PLUS®Screwdriver. Handle with Rotating Cap and Rapid-turning Zone.

chrome-plated. Wiha ChromTop

components.

finish on tip for a perfect fit every time.

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

page 38

• Variable, steplessly adjustable or preset torque

• Torque Value can be set via Window Scale.

• Also suitable for oily work places or environments

• Torque screwdriver with pre-set, fixed torque

• Robust industrial design

• Ergonomic handle with torque value printed on handle

• Interchangeable blades with colour coding

• Ergonomic multi-component handle

• Compact and particularly low weight design

• Clearly audible and perceptible click on attaining the pre-set torque

• Release accuracy ±6 %

page 39

•

Opening torque not mechanically limited

• Release accuracy ±10 %

• Insensitive to industrial

lubricants

• easy cleaning

• Limit to the tightening and loosening torque prevents damage to the tool and screw

• T-handle with soft zones is comfortable to hold

• High-quality and robust, precision construction

• Variable design with easyto-read, numerical scale

page 42

• T-handle especially suitable for higher torques between 5 - 14 Nm

• Each handle is individually tested, laser-calibrated and marked with an identification number

• Large selection of interchange able blades, adapter blades for nuts and bit holders

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

TorqueVario®-S with Scale.

with Scale

2852

Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).

Standards: EN ISO 6798, BS EN 26789, ASME B107.14M Accuracy: ±6 %, traceable to national standards (•model 0.1-0.6 Nm = ±10 %). Application: For applications where recommended torque settings are important.

Extra: Delivered in practical plastic box, incl. factory calibration certificate.

Order-No. 26888 6 0.1-0.6• 4 127 23 1 26461 1 0.4-1.0 4 127 23 1 26462 8 0.8-2.0 4 131 30 1 26463 5 1.0-5.0 4 138 36 1 26464 2 2.0-8.0 4 142 41 1

• Accuracy ±10 %

TorqueVario -S Torque Screwdriver. Torque Value can be set via Window Scale. Automatic Release.

Ergonomic multi-component handle, particulary light and compact. Handle sizes proportioned to optimise torque setting. Audible and perceptible click when the pre-set torque has been attained.

Use in combination with a Wiha torque interchangeable blade.

TorqueVario®-S Set.

TorqueFix®.

2850

Handle: Ergonomic multi-component handle, particulary light and compact.

Standards: EN ISO 6798, BS EN 26789, ASME B107.14M Accuracy: ±6 %, traceable to national standards (•model 0.15 Nm = ±10 %). Application: For applications where recommended torque settings are important.

Extra: Delivered in practical plastic box, incl. factory calibration certificate.

Note: The below articles are available from stock.

Order-No. 26890 9 0.15• 4 112 23 1 26127 6 0.5 4 112 23 1 26047 7 0.6 4 112 23 1 26048 4 0.9 4 112 23 1 26133 7 1.1 4 119 30 1 26051 4 2.0 4 119 30 1 26128 3 2.5 4 119 30 1 26052 1 3.0 4 126 36 1 26129 0 3.8 4 126 36 1 26130 6 5.5 4 132 41 1 26131 3 7.2 4 132 41 1

• Accuracy ±10 %

TorqueFix®Torque Screwdriver. With a Fixed Torque Value Pre-set by Wiha. Automatic Release.

Handle sizes proportioned to optimise torque setting. Audible and perceptible click when the pre-set torque has been attained.

Use in combination with a Wiha torque interchangeable blade.

Further articles with pre-set, customer torque values of between

0.15 and 8 Nm are available on request.

with Scale

2852 S10

Extra: Delivered in robust metal box, incl. factory calibration certificate.

Order-No. Series 26893 0

TorqueVario®-S Torque Screwdriver Set, 13 pcs. Torque Value can be set via Window Scale. With Bit Universal Holder and 10 Phillips/Pozidriv/TORX®/ Hex Standard Bits.

2852 S10

2852 2859 Torque bit universal holder 285-900 Torque-Setter 7011 Z PH1x25 PH2x25 7012 Z PZ1x25 PZ2x25 7015 Z T10x25 T15x25 T20x25 T25x25 7013 Z 3.0x25 4.0x25

TorqueVario®-S Torque screwdriver

Torque-Setter.

285-900

Blade: Octagonal blade, through hardened, zinc-plated. Handle: Cellulose acetate with micro-fine surface structure.

Order-No. 26864 0 40 150 1

Torque-Setter. Setting Tool for Variable Torque Screwdrivers. Included in Every Torque Screwdriver Delivery.

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

easyTorque Torque Screwdriver.

291

Handle: Comfortable handle for good power transfer.

Application: Ideal for screw-fastening indexable inserts to a prescribed torque.

Order-No. 30342 6 0.5 4 103 32 1 30343 3 0.6 4 103 32 1 30344 0 0.9 4 103 32 1 30345 7 1.1 4 103 32 1 30346 4 1.2 4 103 32 1 30347 1 1.4 4 103 32 1 30348 8 2.0 4 103 32 1 30349 5 2.5 4 103 32 1 30350 1 3.0 4 103 32 1 30351 8 3.8 4 103 32 1

easyTorque Torque Screwdriver. With a Fixed Torque Value Ex-factory.

Lightweight design, torque value printed on tool. Internal mechanism slips when torque value has been attained. Opening torque not mechanically limited in anti-clockwise direction. Release accuracy ± 10 %.

easyTorque Torque Screwdriver.

N E W

291

Handle: Comfortable handle for good power transfer.

Blade: Interchangeable blade system for rapid, cost-saving replacement of blade

Application: For controlled fastening and unfastening of indexable cutter inserts.

Order-No. 33636 3 0.6 T6 75 103 32 1 33637 0 0.9 T7 75 103 32 1 33638 7 1.2 T8 75 103 32 1 33639 4 1.4 T9 75 103 32 1 33640 0 2.0 T10 75 103 32 1 33641 7 3.0 T15 75 103 32 1

easyTorque Torque Screwdriver.

For TORX

Rapid identification with imprint on handle end. Release mechanism upon reaching of torque value, release accuracy ±10 %. Loosening torque is not mechanically limited. Mechanism insensitive to industrial lubricants.

after wear. High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop®finish on tip for a perfect fit every time.

Recommended torque values matched to specifications from leading indexable cutter insert manufacturers. Easy-to-clean grip surface, especially for industrial applications.

screws with fixed torque value.

N E W

291

Handle: Comfortable handle for good power transfer.

Blade: Interchangeable blade system for rapid, cost-saving replacement of blade

Application: For controlled fastening and unfastening of indexable cutter inserts.

Order-No. 33633 2 1.4 2.0 75 103 32 1 33634 9 2.0 2.5 75 103 32 1 33635 6 3.0 3.0 75 103 32 1

easyTorque Torque Screwdriver.

For Allen screws with fixed torque value.

after wear. High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop

Recommended torque values matched to specifications from leading indexable cutter insert manufacturers. Easy-to-clean grip surface, especially for industrial applications.

finish on tip for a perfect fit every time.

N E W

291

Handle: Comfortable handle for good power transfer.

Blade: Interchangeable blade system for rapid, cost-saving replacement of blade

Application: For controlled fastening and unfastening of indexable cutter inserts.

Order-No. 33642 4 0.6 6 IP 75 103 32 1 33643 1 0.9 7 IP 75 103 32 1 33644 8 1.2 8 IP 75 103 32 1 33645 5 1.4 9 IP 75 103 32 1 33646 2 2.0 10 IP 75 103 32 1 33647 8 3.0 15 IP 75 103 32 1

easyTorque Torque Screwdriver.

For TORX PLUS® screws with fixed torque value.

after wear. High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop

Recommended torque values matched to specifications from leading indexable cutter insert manufacturers. Easy-to-clean grip surface, especially for industrial applications.

finish on tip for a perfect fit every time.

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

Torque Interchangeable Blades.

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 26544 1 1.3 4 175 42 0.4 1 26200 6 1.5 4 175 42 0.9 1 26060 6 2.0 4 175 42 1.8 1 26061 3 2.5 4 175 42 3.8 1 26062 0 3.0 4 175 42 5.5 1 26063 7 4.0 4 175 42 8.0 1

Torque Hex Interchangeable Blade. For Torque Screwdrivers.

chrome-plated. Wiha ChromTop Colour-coding: red.

Use in combination with a Wiha torque handle.

finish on tip for a perfect fit every time.

Torque Interchangeable Blades.

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 30852 0 T4 4 175 42 0.25 1 26158 0 T5 4 175 42 0.4 1 26064 4 T6 4 175 42 0.6 1 26065 1 T7 4 175 42 0.9 1 26066 8 T8 4 175 42 1.3 1 26059 0 T9 4 175 42 2.5 1 26067 5 T10 4 175 42 3.8 1 26068 2 T15 4 175 42 5.5 1 26069 9 T20 4 175 42 8.0 1 26070 5 T25 4 175 42 8.0 1

Torque TORX®Interchangeable Blade. For Torque Screwdrivers.

chrome-plated. Wiha ChromTop Colour-coding: dark green.

Use in combination with a Wiha torque handle.

finish on tip for a perfect fit every time.

N E W

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Extra: The ball end enables the user to work at angles up to 25°.

Order-No. 26221 1 1.5 4 175 42 0.4 1 26222 8 2.0 4 175 42 0.9 1 26223 5 2.5 4 175 42 2,0 1 26224 2 3.0 4 175 42 3,8 1 26225 4 4.0 4 175 42 8,0 1

Torque Ball End Hex Interchangeable Blade. For Torque Screwdrivers.

chrome-plated. Wiha ChromTop Colour-coding: red.

Use in combination with a Wiha torque handle.

finish on tip for a perfect fit every time.

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 27818 2 T6 4 175 42 0.6 1 27812 0 T7 4 175 42 0.9 1 27813 7 T8 4 175 42 1.3 1 27814 4 T9 4 175 42 2.5 1 27815 1 T10 4 175 42 3.8 1 27816 8 T15 4 175 42 5.5 1 27817 5 T20 4 175 42 8.0 1 29467 0 T25 4 175 42 8.0 1

Torque TORX®MagicSpring®Interchangeable Blade. For Torque Screwdrivers. Retaining Spring holds TORX®Screws in Place.

chrome-plated. Wiha ChromTop Colour-coding: dark green.

Use in combination with a Wiha torque handle.

finish on tip for a perfect fit every time.

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

Torque Interchangeable Blades.

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 26159 7 5IP 4 175 42 0.5 1 26071 2 6IP 4 175 42 0.8 1 26152 8 7IP 4 175 42 1.3 1 26072 9 8IP 4 175 42 2.0 1 26154 2 9IP 4 175 42 3.01 26155 9 10IP 4 175 42 4.5 1 26073 6 15IP 4 175 42 6.6 1 26156 6 20IP 4 175 42 8.0 1 26157 3 25IP 4 175 42 8.0 1

Torque TORX PLUS®Interchangeable Blade. For Torque Screwdrivers.

chrome-plated. Wiha ChromTop Colour-coding: light green.

Use in combination with a Wiha torque handle.

finish on tip for a perfect fit every time.

Torque Interchangeable Blades.

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Sleeve: Made of stainless steel, blue plastic coated. Application: For applications where recommended torque settings are important.

Order-No. 27526 6 1/4 4 162 11 1

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Head: Nickel-plated, spring-mounted ball. Application: For applications where recommended torque settings are important.

Torque Bit Universal Holder. For Torque Screwdrivers. Suitable for C 6.3 and E 6.3 (1/4") Bits.

chrome-plated.

Use in combination with a Wiha torque handle.

Torque Adapter Blade. For Torque Screwdrivers. Suitable for 1/4" Square Sockets.

chrome-plated.

Use in combination with a Wiha torque handle.

2859

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 29553 0 6IP 4 175 42 0.8 1 29554 7 7IP 4 175 42 1.3 1 29555 4 8IP 4 175 42 2.0 1 29556 1 9IP 4 175 42 3.0 1 29557 8 10IP 4 175 42 4.5 1 29558 5 15IP 4 175 42 6.6 1 29559 2 20IP 4 175 42 8.0 1 29560 8 25IP 4 175 42 8.0 1

Torque TORX PLUS®MagicSpring®Interchangeable Blade. For Torque Screwdrivers. Retaining Spring holds TORX PLUS®Screws in Place.

chrome-plated. Wiha ChromTop Colour-coding: light green.

Use in combination with a Wiha torque handle.

finish on tip for a perfect fit every time.

Order-No. 26229 7 1/4 4 155 1

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

T-Handle Torque Tools with Scale.

with Scale

2893

Handle: Window scale displays torque value numerically.

Standards: Based on EN ISO 6789, BS EN 26789, ASME B107.14M. Accuracy: ±6 %, traceable to national standards. Application: For applications where recommended torque settings are important.

Extra: Delivered in practical plastic box, incl. factory calibration certificate.

Order-No. 29233 1 5-14 6 56 120 1

TorqueVario®-Stplus T-Handle Torque Tool. Torque can be set via Numerical Scale. With Slipping Clutch.

Torque infinitely adjustable with Torque-Setter setting tool (also supplied). Soft-grip T-handle for extreme comfort and optimal torque transmission. Audible and perceptible click when the pre-set torque has been attained.

Use in combination with an interchangeable 6 mm blade for Wiha T-handle torque tools.

Pre-Set T-Handle Torque Tools.

without Scale

2891

Handle: Soft-grip T-handle for extreme comfort and optimal torque transmission.

Standards: Based on EN ISO 6789, BS EN 26789, ASME B107.14M. Accuracy: ±6 %, traceable to national standards. Application: For applications where recommended torque settings are important.

Extra: Delivered in practical plastic box, incl. factory calibration certificate.

Order-No. 29228 7 6656 120 1 29229 4 8 6 56 120 1 29230 0 10 6 56 120 1 29231 7 12 6 56 120 1 29236 2 12.5 6 56 120 1 29232 4 14 6 56 120 1

TorqueFix®-Tplus T-Handle Torque Tool. With a Fixed Torque Value Pre-set by Wiha. Automatic Release. With Slipping Clutch.

Audible and perceptible click when the pre-set torque has been attained.

Use in combination with an interchangeable 6 mm blade for Wiha T-handle torque tools.

with Scale

2893 S01

Handle: Window scale displays torque value numerically.

Standards: Based on EN ISO 6789, BS EN 26789, ASME B107.14M. Accuracy: ±6 %, traceable to national standards. Application: For applications where recommended torque settings are important. Extra: Delivered in robust metal box, incl. factory calibration certificate.

Order-No. Series 29234 8

TorqueVario®-Stplus T-Handle Torque Tool Set, 11 pcs. With Bit Universal Holder, 6 TORX®/ Hex Standard Bits and 2 Adapter Blades for Nuts.

Torque infinitely adjustable with Torque-Setter setting tool (also supplied). Soft-grip T-handle for extreme comfort and optimal torque transmission.

2893 S01

2893 289-900 Torque-Tplus Setter 2899 1/4x6 3/8x6 2899 1/4x6 7015 Z T25x25 T30x25 T40x25 7013 Z 4.0x25 5.0x25 6.0x25

TorqueVario®-STplus 5-14 Nm

Wiha Torque Screwdrivers.

Precise and high repeat accuracy.

Torque-Tplus Setter and Interchangeable Blades.

289-900

Blade: Octagonal profile with drilled tip, through hardened, zinc-plated. Handle: Made of impact resistant cellulose acetate.

Order-No. 28691 0 80 150 1

Torque-Tplus Setter. Setting Tool for Variable T-Handle Torque Tools. Included in Every T-Handle Torque Tool Delivery.

Interchangeable Blades.

2899

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 28746 7 36130 53 9 79 1 28747 4 4 6 130 53 15 132 1 28748 1 56130 53 15 132 1 28749 8 6 6 130 53 15 132 1

Torque-Tplus Hex Interchangeable Blade. For T-Handle Torque Tools.

chrome-plated. Wiha ChromTop Colour-coding: red.

finish on tip for a perfect fit every time.

2899

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 28734 4 T15 6 130 53 6 53 1 28735 1 T20 6 130 53 10 88 1 28736 8 T25 6 130 53 15 132 1 28737 5 T27 6 130 53 15 132 1 28738 2 T30 6 130 53 15 132 1 28739 9 T40 6 130 53 15 132 1

2899

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Application: For applications where recommended torque settings are important.

Order-No. 28740 5 15IP 6 130 53 8 70 1 28741 2 20IP 6 130 53 13 115 1 28742 9 25IP 6 130 53 15 132 1 28743 6 27IP 6 130 53 15 132 1 28744 3 30IP 6 130 53 15 132 1 28745 0 40IP 6 130 53 15 132 1

Torque-Tplus TORX®Interchangeable Blade. For T-Handle Torque Tools.

chrome-plated. Wiha ChromTop Colour-coding: dark green.

Torque-Tplus TORX PLUS®Interchangeable Blade. For T-Handle Torque Tools.

chrome-plated. Wiha ChromTop Colour-coding: light green.

finish on tip for a perfect fit every time.

2899

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Sleeve: Quick release bit holder for T-Handle torque tools. Enables ultra fast bit

Application: For controlled turning of screws with bits at a prescribed torque.

Order-No. 28758 0 1/4 6 125 11

2899

Blade: High quality chrome-vanadium-molybdenum steel, through hardened,

Head: Nickel-plated, spring-mounted ball. Application: For controlled turning of screws with nuts at a prescribed torque.

Order-No. 28756 6 1/4 6 120 53 28757 3 3/8 6 120 53

Torque-Tplus Bit Quick Release Holder. For T-Handle Torque Tools. Suitable for C 6.3 and E 6.3 (1/4") Bits.

chrome-plated.

changes.

105 mm visible length

Torque-Tplus Adapter Blade. For T-Handle Torque Tools. Suitable for 1/4" respc. 3/8" Square Sockets.

chrome-plated.

100 mm visible length 100 mm visible length

1 1

Wiha Pliers.

Wiha Professional pliers have won the "Focus in Silver" award for outstanding design.

Wiha Inomic®.

• Better force transfer as all fingers grip simultaneously and in parallel: comfortable as less force has to be applied

• Angled shape 23°: for fatigue-free work

• With opening spring: Comfortable, controlled and sensitive work

In collaboration with the IAO Stuttgart (Institute forIndustrial Engineering), a wide variety of shapes and variants for this new generation of pliers was investigated during the course of extensive studies and user tests. Gripping system, hand closure forces, jaw shapes and geometries are just a few of the points examined.

The Inomic pliers are angled at 23° to support the physiological movement of the wrist when working and thus prevent an unhealthy wrist position, which often leads to problems such as carpal tunnel syndrome.

Wiha Professional.

• Drop-forged out of selected carbon or chrome-vanadium steels: the basis for top quality

• Cutting and gripping surfaces also inductively hardened up to 64 HRC: maximum tool life and optimum cutting performance

• Lay-on, lap or box joint (depending on the type of pliers): extremely low wear and tough thanks to use of special rivet qualities

• Cutting and other functions tested to ensure zero-play and jolt-free movement: individually tested

• New, ergonomic handle sleeve: optimum distribution of hard and soft zones in the pressure and movement zones

Wiha Pliers.

Wiha Combination Pliers. page 46 - 47

Wiha Basic.

• Drop-forged from the best selected, suitable carbons of chrome-vanadium steels for the best technical properties

• Extra long cutting edge for flat and round cables

• The stops on the ends of the arms prevent the hands from slipping

Wiha Needle Nose Pliers. page 47 - 48

• Extra long cutting edge for flat and round cables

• Gripping surfaces serrated in parts

Wiha Diagonal Cutter. page 49 - 50

• Low wear lap joint, riveted and able to withstand high loads

• High-quality tool steel, tempered

• Robust, ergonomic handle

• Valuable chrome plating for long lasting corrosion protection

• High-quality tool steel, tempered

•

Gripping, holding and cutting soft and hard wires and cables

• For soft and hard wire

• Lightweight action, clean cutting achieved by specially milled precision cutting edges

• Cutting edges are additionally induction hardened up to 64 HRC for maximum service life and cutting results. Gripping teeth on water pump pliers are also additionally hardened

• Lay-on, inserted or box jointed, depending on the model and intended use. In some instances, high levels of load can be tolerated and produce little wear due to the use of new quality rivets

• Heads polished several times.

• Products are individually tested by experienced pliers specialists

• Anti-slip, oil and thinner resistant handle

Wiha Water Pump Pliers. page 51 - 52

• Narrow head, therefore also appropriate for work in small spaces

• For gripping and holding pipes and angular profiles such as hex nuts

Wiha Circlip Pliers. page 53 - 54

• Drop forged, cylindrical precision tips

• Chrome-vanadium tool steel

• Precision adjustment joint, box type, providing optimum adaptation to object to be gripped

• Chrome vanadium tool steel, tempered

• Several Pliers for Bores (internal) and Shafts (external)

Wiha Combination Pliers.

Wiha Inomic®Combination Pliers.

N E W

Z 01 9 15

Head shape: Extra long cutting edge for flat and round cables. Design: Serrated gripper jaws.

Material: Pliers head of high-quality tool steel.

Application: For gripping, holding and cutting.

Order-No. 30655 7 180 3.3 2.2 155 5

Combination Pliers Inomic®.

Cutting edges additionally induction hardened to approx. 64 HRC. Arms of the pliers move in parallel: +25 % force transfer. Angled shape (23°) for fatigue-free work. With opening spring and locking mechanism.

Handles made of tough fibre-glass reinforced plastic, ergonomic soft grip zone in the handle.

With improved access to the objects to be processed.

Combination Pliers.

Z 01 0 05

Standards: DIN ISO 5746. Head shape: Extra long cutting edge for flat and round cables.

Design: Cutting edges additionally inductively hardened to approx. 60 HRC. Material: High-quality tool steel, tempered. Application: General purpose pliers for gripping and holding as well as cutting soft and

Order-No. 26704 9 160 6 ½ 3.0 2.0 210 5 26707 0 180 7 3.3 2.2 250 5 26710 0 200 8 3.6 2.5 325 5

Combination Pliers Professional.

Serrated gripper jaws.

hard wires and cables.

Details of cutting results of cutting pliers. Symbol Types of wire Example Tensile strength ca. N/mm

Soft wire Copper, aluminium 220 - 250 Medium hard wire Iron nail 750 - 800 Hard wire Spring wire, steel nails 1.600 - 1.800 Piano wire Hardened spring steel 2.200 - 2.300

Test wires standardised in DIN ISO 5744

Z 01 0 01

Standards: DIN ISO 5746. Head shape: Extra long cutting edge for flat and round cables.

Order-No. 26703 2 160 6 ½ 3.0 2.0 185 5 26706 3 180 7 3.3 2.2 225 5 26709 4 200 8 3.6 2.5 285 5

Combination Pliers Basic.

Serrated gripper jaws.

hard wires and cables.

Wiha Combination Pliers.

High Leverage Combination Pliers.

Z 02 0 05

Standards: DIN ISO 5746. Head shape: Extra long cutting edge for flat and round cables.

Design: Particularly powerful leverage results in 40 % less effort being required for

Material: High-quality tool steel, specially tempered. Application: Power assisted general purpose pliers for gripping and holding as well as

Order-No. 26713 1 200 8 3.8 2.7 2.3 310 5 26716 2 225 9 4.4 3.0 2.5 360 5

High Leverage Combination Pliers Professional.

Serrated gripper jaws.

cutting tasks compared with standard combination pliers. Cutting edges additionally inductively hardened to approx. 64 HRC, therefore also appropriate for cutting piano wire.

cutting wires and cables ranging in hardness from soft to extremely hard.

Wiha Inomic®Needle Nose Pliers.

N E W

Z 06 9 15

Head shape: Straight form with extra-long cutting edge. Design: Ridged gripping surfaces.

Material: Pliers head of high-quality tool steel.

Application: For gripping, holding and cutting.

Needle Nose Pliers Inomic®.

Handles made of tough fibre-glass reinforced plastic, ergonomic soft grip zone in the handle.

With improved access to the objects to be processed.

Z 02 0 01

Standards: DIN ISO 5746. Head shape: Extra long cutting edge for flat and round cables.

Design: Particularly powerful leverage results in 40 % less effort being required for

Material: High-quality tool steel, specially tempered. Application: Power assisted general purpose pliers for gripping and holding as well as

Order-No. 26712 4 200 8 3.8 2.7 2.3 275 5 26715 5 225 9 4.2 3.0 2.5 355 5

High Leverage Combination Pliers Basic.

Serrated gripper jaws.

cutting tasks compared with standard combination pliers. Cutting edges additionally inductively hardened to approx. 64 HRC, therefore also appropriate for cutting piano wire.

cutting wires and cables ranging in hardness from soft to extremely hard.

Order-No. 30660 1 160 2.5 1.6 150 5

Details of cutting results of cutting pliers. Symbol Types of wire Example Tensile strength ca. N/mm

Soft wire Copper, aluminium 220 - 250 Medium hard wire Iron nail 750 - 800 Hard wire Spring wire, steel nails 1.600 - 1.800 Piano wire Hardened spring steel 2.200 - 2.300

Test wires standardised in DIN ISO 5744

Wiha

Needle Nose Pliers

Wiha Needle Nose Pliers.

Z 05 0 05

Standards: DIN ISO 5745. Head shape: Straight shape. Design: Extra long cutting edge for flat and round cables.

Material: High-quality tool steel, tempered. Application: Gripping and holding as well as cutting soft and hard wires and cables.

Order-No. 26719 3 160 6 ½ 2.5 1.6 140 5 26722 3 200 8 2.8 1.8 210 5

Needle Nose Pliers Professional with Cutting Edge.

Gripping surfaces serrated in parts. Cutting edges additionally inductively hardened to approx. 60 HRC.

Preferred choice in the mechanical sector.

Wiha

Needle Nose Pliers with Cutting Edge.

Z 05 1 05

Standards: DIN ISO 5745. Head shape: Angled, approx. 40°. Design: Extra long cutting edge for flat and round cables.

Material: High-quality tool steel, tempered. Application: Gripping and holding as well as cutting soft and hard wires and cables.

Order-No. 26724 7 160 6 ½ 2.5 1.6 140 5 26726 1 200 8 2.8 1.8 210 5

Needle Nose Pliers Professional with Cutting Edge.

Gripping surfaces serrated in parts. Cutting edges additionally inductively hardened to approx. 60 HRC.

Preferred choice in the mechanical sector.

Z 05 0 01

Standards: DIN ISO 5745. Head shape: Straight shape. Design: Extra long cutting edge for flat and round cables.

Material: High-quality tool steel, tempered. Application: Gripping and holding as well as cutting soft and hard wires and cables.

Order-No. 26718 6 160 6 ½ 2.5 1.6 125 5 26721 6 200 8 2.8 1.8 165 5

Details of cutting results of cutting pliers. Symbol Types of wire Example Tensile strength ca. N/mm

Test wires standardised in DIN ISO 5744

Needle Nose Pliers Basic with Cutting Edge.

Gripping surfaces serrated in parts. Cutting edges additionally inductively hardened to approx. 60 HRC.

Preferred choice in the mechanical sector.

Soft wire Copper, aluminium 220 - 250 Medium hard wire Iron nail 750 - 800 Hard wire Spring wire, steel nails 1.600 - 1.800 Piano wire Hardened spring steel 2.200 - 2.300

Z 05 1 01

Standards: DIN ISO 5745. Head shape: Angled, approx. 40°. Design: Extra long cutting edge for flat and round cables.

Material: High-quality tool steel, tempered. Application: Gripping and holding as well as cutting soft and hard wires and cables.

Order-No. 26723 0 160 6 ½ 2.5 1.6 125 5 26725 4 200 8 2.8 1.8 165 5

Needle Nose Pliers Basic with Cutting Edge.

Gripping surfaces serrated in parts. Cutting edges additionally inductively hardened to approx. 60 HRC.

Preferred choice in the mechanical sector.

Wiha Diagonal Cutters.

Diagonal Cutters.

N E W

Z 12 9 15

Head shape: Semi-circular, swedish style. Design: Arms of the pliers move in parallel: +25 % force transfer.

Material: Pliers head of high-quality tool steel.

Application: For soft and hard wires.

Order-No. 30663 2 160 4.0 2.8 2.0 140 5

Diagonal Cutters Inomic®.

Angled shape (23°) for fatigue-free work. With opening spring and locking mechanism.

Handles made of tough fibre-glass reinforced plastic, ergonomic soft grip zone in the handle.

With improved access to the objects to be processed.

Diagonal Cutters.

Z 12 0 01

Standards: DIN ISO 5749. Head shape: Semi-circular, Swedish style. Design: Low wear lap joint, riveted and able to withstand high loads.

Material: High-quality tool steel, tempered. Application: For cutting soft and hard wires and cables.

Order-No. 26738 4 140 5 ½ 4.0 2.5 1.8 150 5 26739 1 160 6 ½ 4.0 2.8 2.0 190 5 26742 1 180 7 4.0 3.0 2.5 240 5

Diagonal Cutters Basic.

Lightweight action, clean cutting achieved by specially milled precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC.

Z 12 0 05

Standards: DIN ISO 5749. Head shape: Semi-circular, Swedish style. Design: Low wear lap joint, riveted and able to withstand high loads.

Material: High-quality tool steel, tempered. Application: For soft and hard wires.

Order-No. 26736 0 140 5 ½ 4.0 2.5 1.8 175 5 26740 7 160 6 ½ 4.0 2.8 2.0 230 5 26743 8 180 7 4.0 3.0 2.5 280 5

Diagonal Cutters Professional.

Lightweight action, clean cutting achieved by specially milled precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC.

Details of cutting results of cutting pliers. Symbol Types of wire Example Tensile strength ca. N/mm

Soft wire Copper, aluminium 220 - 250 Medium hard wire Iron nail 750 - 800 Hard wire Spring wire, steel nails 1.600 - 1.800 Piano wire Hardened spring steel 2.200 - 2.300

Test wires standardised in DIN ISO 5744

Wiha Diagonal Cutters.

Heavy Duty Diagonal Cutters.

Z 16 0 05

Standards: DIN ISO 5749. Head shape: Semi-circular. Design: Low wear lap joint, riveted and able to withstand high levels of load.

Material: High-quality tool steel, specially tempered. Application: Power assisted, all round diagonal cutter for soft wire as well as the most

Order-No. 26747 6 160 6 ½ 3.5 2.5 2.0 220 5 26750 6 180 7 3.8 2.7 2.3 260 5 26753 7 200 8 4.2 3.0 2.5 300 5

Z 16 0 01

Standards: DIN ISO 5749. Head shape: Semi-circular. Design: Low wear lap joint, riveted and able to withstand high levels of load.

Material: High-quality tool steel, specially tempered. Application: Power-assisted all-round side cutter for cutting soft to extremely hard

Heavy Duty Diagonal Cutters Professional.

Lightweight action, clean cutting achieved by specially milled precision cutting edges. Long term cutting is achieved through additional inductive hardening to approx. 64 HRC.

stringent of demands made by piano wires.

Heavy Duty Diagonal Cutters Basic.

Lightweight action, clean cutting achieved by specially milled precision cutting edges. Long term cutting is achieved through additional inductive hardening to approx. 64 HRC.

wires and cables.

Order-No. 26746 9 160 6 ½ 3.5 2.5 2.0 190 5 26749 0 180 7 3.8 2.7 2.3 225 5 26752 0 200 8 4.2 3.0 2.5 250 5

Wiha Water Pump Pliers.

Z 21 0 05

Standards: DIN ISO 8976. Head shape: Narrow head, therefore also appropriate for work in small spaces. Design: Precision adjustment joint, box type, providing optimum adaptation to

Material: Chrome vanadium tool steel, tempered. Application: For gripping and holding pipes and angular profiles such as hex nuts in

Order-No. 26762 9 250 10 1 ¾ 50 345 5

Water Pump Pliers Professional, Box Type.

object to be gripped. Long durability achieved by additional inductive hardening of gripper jaws to approx. 58 - 60 HRC.

the installation area.

Wiha Water Pump Pliers.

Z 22 0 05

Standards: DIN ISO 8976. Head shape: Extra narrow head, therefore also appropriate for work in difficult to

Design: Precision adjustment joint, box type, providing optimum adaptation to

Material: Chrome vanadium tool steel, tempered. Application: For gripping and holding pipes and angular profiles such as hex nuts in

Order-No. 26766 7 250 10 1 ¾ 50 360 5

Water Pump Pliers Professional with Push Button Setting.

access areas.

object to be gripped. Rapid and simple push button setting and locking. Long durability achieved by additional inductive hardening of gripper jaws to approx. 58 - 60 HRC. Finger jam protection in all settings ensures safe operation.

the installation area.

Z 21 0 01

Standards: DIN ISO 8976. Head shape: Narrow head, therefore also appropriate for work in small spaces. Design: Precision adjustment joint, box type, providing optimum adaptation to

Material: Chrome vanadium tool steel, tempered. Application: For gripping and holding pipes and angular profiles such as hex nuts in

Order-No. 26760 5 180 7 1 30 160 5 26761 2 250 10 1 ¾ 50 305 5 26763 6 300 12 2 63 490 5

Water Pump Pliers Basic, Box Type.

object to be gripped. Long durability achieved by additional inductive hardening of gripper jaws to approx. 58 - 60 HRC.

the installation area.

Z 22 0 01

Standards: DIN ISO 8976. Head shape: Extra narrow head, therefore also appropriate for work in difficult to

Design: Precision adjustment joint, box type, providing optimum adaptation to

Material: Chrome vanadium tool steel, tempered. Application: For gripping and holding pipes and angular profiles such as hex nuts in

Order-No. 26764 3 180 7 1 30 165 5 26765 0 250 10 1 ¾ 50 310 5 26767 4 300 12 2 63 560 5

Water Pump Pliers Basic with Push Button Setting.

access areas.

the installation area.

Opening width of water pump pliers.

Maximum gripper width across flats [mm] Maximum gripper pipe diameter

]

[

Wiha Water Pump Pliers.

Wiha QuickFix Water Pump Pliers.

Z 23 0 05

Standards: DIN ISO 8976. Head shape: Narrow head, therefore also appropriate for work in small spaces. Design: Fast and easy-to-adjust water pump pliers, with automatic adjustment of

Material: Chrome vanadium tool steel, tempered. Application: For rapid and optimum gripping and holding of pipes and angular profiles

Order-No. 26769 8 250 10 1 ½ 40 380 5

QuickFix Water Pump Pliers Professional, Box Type.

the box type, precision-stepped joint. Optimum adjustment to the object to be gripped. Long durability achieved by additional inductive hardening of gripper jaws.

such as hex nuts in the installation area.

Wiha Professional pliers have won the "Focus in Silver" award for outstanding design. The Stuttgart Design Center awarded the 2006 international design prize in a special energy category. Energy also determines the reference level – the key to success.

"Focus in Silver" award Convincing ergonomics, surface feel and clean design lines.

Z 23 0 01

Standards: DIN ISO 8976. Head shape: Narrow head, therefore also appropriate for work in small spaces. Design: Fast and easy-to-adjust water pump pliers, with automatic adjustment of

Material: Chrome vanadium tool steel, tempered. Application: For rapid and optimum gripping and holding of pipes and angular profiles

Order-No. 26768 1 250 10 1 ½ 40 360 5

QuickFix Water Pump Pliers Basic, Box Type.

the box type, precision-stepped joint. Optimum adjustment to the object to be gripped. Long durability achieved by additional inductive hardening of gripper jaws.

such as hex nuts in the installation area.

Opening width of water pump pliers.

Maximum gripper width across flats [mm] Maximum gripper pipe diameter

]

[

Wiha Circlip Pliers.

Circlip Pliers for Bores (Internal).

Z 33 0 01

Standards: DIN ISO 5256. Head shape: Straight shape. Design: Drop forged, cylindrical precision tips. Material: Chrome-vanadium tool steel. Application: For inserting / removing circlips from inside bores.

Order-No. 26781 0 J 0 139 5 8-13 90 5 26782 7 J 1 140 5 12-25 90 5 26783 4 J 2 180 7 19-60 175 5 26784 1 J 3 225 9 40-100 260 5 29425 0 J 4 310 12 85-140 440 5

Internal Circlip Pliers Basic (for Boreholes).

Circlip Pliers for Shafts (External).

Z 34 0 01

Standards: DIN ISO 5254. Head shape: Straight shape. Design: Drop forged, cylindrical precision tips. Material: Chrome-vanadium tool steel. Application: For fitting / removing circlips externally to / from shafts or axles.

Order-No. 26789 6 A 0 139 5 3-10 90 5 26790 2 A 1 140 5 10-25 90 5 26791 9 A 2 180 7 19-60 175 5 26792 6 A 3 225 9 40-100 260 5 29428 1 A 4 310 12 85-140 440 5

External Circlip Pliers Basic (for Shafts).

Z 33 1 01

Standards: DIN ISO 5256. Head shape: Shape D: 90° angled shape. Design: Drop forged, cylindrical precision tips. Material: Chrome-vanadium tool steel. Application: For inserting / removing circlips from inside bores.

Order-No. 26785 8 J 01 139 5 8-13 90 5 26786 5 J 11 140 5 12-25 90 5 26787 2 J 21 180 7 19-60 175 5 26788 9 J 31 225 9 40-100 260 5 29427 4 J 41 310 12 85-140 440 5

Internal Circlip Pliers Basic (for Boreholes).

Wiha Info

• Only use the relevant circlip pliers for the specified application area!

• Mechanically release fixed circlips beforehand!

Z 34 1 01

Standards: DIN ISO 5254. Head shape: Shape D: 90° angled shape. Design: Drop forged, cylindrical precision tips. Material: Chrome-vanadium tool steel. Application: For fitting / removing circlips externally to / from shafts or axles.

Order-No. 26794 0 A 01 139 5 3-10 90 5 26795 7 A 11 140 5 10-25 90 5 26796 4 A 21 180 7 19-60 175 5 26797 1 A 31 225 9 40-100 260 5 29429 8 A 41 310 12 85-140 440 5

External Circlip Pliers Basic (for Shafts).

Wiha Pliers.

Flat Nose and Round Nose Pliers.

Z 07 0 01

Standards: DIN ISO 5745. Head shape: Extra long head. Design: Ridged gripping surfaces. Material: High-quality tool steel, tempered. Application: Gripping and right-angled bending of wires and sheet metal parts.

Order-No. 26730 8 160 6 ½ 120 5

Long-flat Nose Pliers Basic.

Pliers and Tool Set.

Z 99 0 001 01

Design: All pliers made of high-quality tool steel, hardened.

Content: Combination pliers serie Z 01 0 01, 180 mm

Application: Standard set of pliers for the basic set of tools.

Order-No. Series 26850 3

Pliers Set Basic, 3 pcs.

Head of pliers polished several times and non-slip, oil- and solvent-resistant handle coating. Weight 690 g.

Needle nose pliers serie Z 05 0 01, 160 mm Diagonal cutters serie Z 12 0 01, 160 mm

Z 99 0 001 01

Z 09 0 01

Standards: DIN ISO 5745. Head shape: Extra long head. Design: Ridged gripping surfaces. Material: High-quality tool steel, tempered. Application: Gripping and bending of wires and sheet metal parts.

Order-No. 26733 9 160 6 ½ 115 5

Long-round Nose Pliers Basic.

Z 99 0 004 01

Design: All pliers in proven basic quality.

Content: Circlip pliers for bores, serie Z 33 0 01, J10

Application: Set of pliers as basic set of tools for attaching retaining rings to and

Pliers Set Basic Circlip, 4 pcs.

Particularly precise tips due to high-speed turning, cylindrical with defined flat cone point. Tightened with great dimensional accuracy and not subsequently curved. Weight 680 g.

Circlip pliers for bores, serie Z 33 0 01, J20 Circlip pliers for shafts, serie Z 34 0 01, A10 Circlip pliers for shafts, serie Z 34 0 01, A20

removing them from shafts and boreholes.

Order-No. Series 26793 3

Z 99 0 004 01

Wiha Dead-blow Hammer.

A Star in the World of Recoilless Tools.

Wiha Dead-blow Hammer.

• Recoilless working due to special metal filling in the hammer casing

• The hammer weight is increased by about 25 % for additional power

• Easy on delicate surfaces and edges as a result of its comfort cushing surface

• Available with hickory wood handle or steel tube shaft

• Faces and wooden handles available as spare parts

• Especially easy on muscles, tendons and joints

The Wiha recoilless soft-face hammer offers optimum comfort for controlled, careful blows: it enables fatigue-free work.

The special metal filling in the hammer casing enables recoilless working.

Wear safety glasses and protective gloveswhen working withsoft head hammers.

In addition, observe the national standards and regulations

The face is made of medium-hard polyurethane for full blows and protects delicate surfaces and edges.

Wiha Dead-blow Hammer.

A Star in the World of Recoilless Tools.

Hammers.

800

Faces: Both yellow: Medium hard, colourfast and wear-resistant polyurethane. Housing: Manufactured from precision steel tubing with welded on shaft,

Shaft: Hickory handle coated with ergonomic profile and high quality surface. Standards: GS Mark: Tested Safety. Application: Controlled strikes e.g. on workpieces being held by vices or assembly

Extra: With cast iron balls inside the hammer head for recoilless work.

Order-No. 02092 7 25 320 108 320 5 02093 4 30 460 115 350 5 02094 1 35 580 118 355 5 02095 8 40 760 125 375 5 02096 5 45 1000 130 380 2 02097 2 50 1250 135 385 2 02098 9 60 2000 165 420 2 02099 6 70 2600 165 430 2

Dead-Blow Hammer with Hickory Handle.

powder coated.

work.

Substitute Parts for Hammer Sizes 25 - 70 mm.

800S

Material: Carefully selected Hickory with high quality surface. Properties: Over the years, hickory, an extremely hard wood, has proven to be the

Order-No.. 02113 9 25 295 69 10 02114 6 30/35 320 113 10 02115 3 40/45 335 123 10 02116 0 50 335 133 10 02117 7 60/70 360 165 5

800K

Material: Medium hard polyurethane, colourfast and wear-resistant. Application: Tool and machine construction, metal working, automobile repairs,

Order-No. 02103 0 25 16 10 02104 7 30 22 10 02105 4 35 30 10 02106 1 40 45 10 02107 8 45 63 5 02108 5 50 86 5 02109 2 60 130 5 02110 8 70 178 5

Hickory Handle for Dead-blow Hammer.

best material for hammer handles.

Hammer Face, Yellow for Dead-blow Hammer.

panel beating, sheet metal and assembly work.

802

Faces: Both yellow: Medium hard, colourfast and wear-resistant polyurethane. Housing: Manufactured from precision steel tubing, powder coated. Shaft: Welded, powder coated steel tube with ergonomic rubber handle. Standards: GS Mark: Tested Safety. Application: Controlled strikes e.g. on workpieces being held by vices or assembly

Extra: With cast iron balls inside the hammer head for recoilless work.

Order-No. 02122 1 25 520 108 288 5 02123 8 30 600 115 290 5 02124 5 35 700 118 300 5 02125 2 40 850 125 305 5 02126 9 45 1060 130 310 2 02127 6 50 1400 135 365 2 02128 3 60 2050 165 375 2 02129 0 70 2750 165 385 2

Dead-Blow Hammer with Steel Tube Shaft.

work.

Wiha Info

Simple exchange of worn hammer faces:

Grip the hammer in the vice, lift to remove old hammer face.

Press the new hammer face into the handle until it locks into position.

Wiha Articulated Hose System.

The Universal Pipe System.

Wiha Articulated Hose.

• Flexible pipe system for cooling and cleaning in sawing, drilling, turning milling, grinding and eroding with outlet profiles in 1/4" or 1/2"

• Dimensionally stable through tight fitting components, i.e. will not alter under pressure or machine vibrations

• Resistant to chemicals and solvents, non-conductive

• Compatible with related systems

• Also ideally suited to positioning and distributing resources (like a third hand)

Unrestricted flow design

Assembly pliers

Separation wedge

Assembly pliers and separation wedge

www.wiha.com

The Wiha maxiflex®universal articulatedhose system is dimensionally stable, individually adjustable and has a long service life.

Wiha Articulated Hose System.

The Universal Pipe System.

System Ø ¼

Order-No. Art.-No. J

(6.35 mm).

27085 8 412 2030 1

Pack with 22 Segments Length: 280 mm

27086 5 412 2060 1

Pack with 88 Segments Length: 1000 mm

27087 2 412 2220 1

Pack with 4 Cylindrical Nozzles, Ø 1.6 mm

27088 9 412 2240 1

Pack with 4 Cylindrical Nozzles, Ø 3.2 mm

27089 6 412 2260 1

Pack with 4 Cylindrical Nozzles, Ø 5.6 mm

27090 2 412 2280 1

Pack with 2 Flat Multi-Hole Nozzles, 24 mm

27091 9 412 2330 1

Pack with 2 Flat Nozzles, 24 mm

27092 6 412 2420 1

Pack with 4 Angular Nozzles, Ø 1.6 mm

27093 3 412 2440 1

Pack with 4 Angular Nozzles, Ø 3.2 mm

27094 0 412 2460 1

Pack with 4 Angular Nozzles, Ø 5.6 mm

27095 7 412 2480 1

Pack with 2 Multi-Hole Angular Nozzles, 7 Holes, 7 x Ø 2 mm

27096 4 412 2640 1

Pack with 4 Adapters for LOC-LINE Flexi and ARIANA Cool-Line

27097 1 412 2650 1

Pack with 4 Spherical Double Socket Segments

27098 8 412 2660 1

Pack with 4 Double Nipples

27099 5 412 2710 1

Pack with 4 Threaded Nipples, R 1/8

27100 8 412 2720 1

Pack with 4 Threaded Nipples, R 1/4

27101 5 412 2740 1

Pack with 2 Y-Junctions

27102 2 412 2770 1

Pack with 2 Regulating Valves

27103 9 412 2780 1

Pack with 2 Segment Clips

28006 2 412 2020 1

Set with 6 Short Nozzles consisting of:

1 threaded nipple R 1/8 1 segment 1 short cylindrical nozzle ø 2.5 mm

29446 5 412 2760 1

Ball Valve with Threaded Outlet G 1/4"

Order-No. Art.-No. J

27084 1 412 2010 1

maxiflex®Set, Assembled

1 threaded nipple R 1/4 22 segments 1 cylindrical nozzle ø 3.2 mm Total length: 320 mm

27108 4 412 2920 1

Separation Wedge,

27109 1 412 2930 1

Assembly Pliers

27104 6 412 2810 1

Set with Magnetic Foot and Ball Valve, Assembled

1 threaded nipple R 1/4 22 segments 1 cylindrical nozzle ø 3.2 mm Magnetic foot with hose nozzle ø 11 mm Magnetic adhesion 80 N

27105 3 412 2820 1

Set with Magnetic Foot, Assembled

2 threaded nipples R 1/4 44 segments, length: 2 x 320 mm

27106 0 412 2830 1

27107 7 412 2850 1

30518 5 412 2000 1

2 cylindrical nozzles ø 3.2 mm Magnetic foot with hose nozzle ø 11 mm Magnetic adhesion 80 N

Set with Magnetic Foot and Ball Valve, Assembled

1 threaded nipple R 3/8" for hose diameter 1/2" 1 reduction of hose diameter from 1/2" to 1/4" 22 segments 1 cylindrical nozzle ø 3.2 mm Magnetic foot with hose nozzle ø 11 mm Magnetic adhesion 150 N

Distribution Block with 3 Ball Valves

Ball valves with threaded outlets R 1/4 Hose nozzle ø 11 mm Magnetic adhesion 4 x 95 N

maxiflex®Basic Set

3 tubes à 280 mm 2 cylindrical nozzles ø 1.6 mm 3 cylindrical nozzles ø 3.2 mm 2 cylindrical nozzles ø 5.6 mm 1 flat nozzle 24 mm 1 flat nozzle 24 mm, 7 holes ø 1.5 mm 2 Y-junctions 1 spherical double socket segment 2 threaded nipples R 1/8 3 threaded nipples R 1/4 1 adapter for LOC-LINE 1 assembly pliers 1 separation wedge

Wiha Articulated Hose System.

The Universal Pipe System.

System Ø ½

Order-No. Art.-No.

(12.7 mm).

27111 4 412 4030 1

Pack with 12 Segments Length: 265 mm

27112 1 412 4060 1

Pack with 48 Segments Length: 1000 mm

27113 8 412 4130 1

Pack with 4 Jointed Pipe Segments Length: 440 mm

27114 5 412 4160 1

Pack with 4 Segment Clamps incl. Screws

27115 2 412 4220 1

Pack with 4 Cylindrical Nozzles, Ø 10 mm

27116 9 412 4240 1

Pack with 2 Flat Multi-hole Nozzles, 6 Holes, 30 mm

27117 6 412 4330 1

Pack with 2 Flat Nozzles, 30 mm

27118 3 412 4360 1

Pack with 2 Flat Nozzles, 60 mm

27119 0 412 4420 1

Pack with 4 Angular Nozzles, Ø 7 mm

27120 6 412 4440 1

Pack with 4 Angular Nozzles, Ø 10 mm

27121 3 412 4460 1

Pack with 2 Multi-hole Angular Nozzles, 8 Holes x Ø 3.2 mm

27122 0 412 4620 1

Pack with 2 Reducers 1/2" to 1/4" System

27123 7 412 4640 1

Pack with 4 Adapters for LOC-LINE Flexi and ARIANA Cool-Line

27124 4 412 4650 1

Pack with 4 Spherical Double Socket Segments

27125 1 412 4660 1

Pack with 4 Double Nipples

27126 8 412 4720 1

Pack with 4 Threaded Nipples, R 3/8

27127 5 412 4730 1

Pack with 4 Threaded Nipples, R 1/2

Order-No. Art.-No.

29447 2 412 4760 1

Ball Valve with Threaded Outlet G 3/8"

27110 7 412 4010 1

4000 maxiflex®-Set, Assembled

1 threaded nipple R 1/2 12 segments 1 cylindrical nozzle ø 10 mm Total length: 320 mm

27134 3 412 4920 1

Separation Wedge

27135 0 412 4930 1

Assembly Pliers

27132 9 412 4820 1

Set with Magnetic Foot and Ball Valve, Assembled

1 threaded nipple R 3/8 12 segments 1 cylindrical nozzle ø 10 mm Magnetic foot with hose nozzle ø 13 mm Magnetic adhesion 150 N

27133 6 412 4860 1

Distribution Block with 3 Ball Valves

Ball valve with threaded outlet R 3/8 Magnetic adhesion 4 x 95 N

30519 2 412 4000 1

maxiflex®Basic Set

3 tubes à 265 mm 3 cylindrical nozzles ø 10 mm 1 flat nozzle 30 mm 1 flat nozzle 60 mm 1 flat nozzle 30 mm, 6 holes ø 3.3 mm 1 Y-junction 1 Y reducer junction 1 reduction of hose diameter from 1/2" to 1/4" 3 threaded nipples R 1/2 2 threaded nipples R 3/8 1 adapter for LOC-LINE 1 assembly pliers 1 separation wedge

27128 2 412 4740 1

Pack with 2 Y-Junctions

27129 9 412 4750 1

Pack with 2 Y Reducer Junctions

27130 5 412 4770 1

Pack with 2 Regulating Valves

27131 2 412 4780 1

Pack with 2 Segment Clips

You currently use a different system? No problem!

System Information

LOC-LINE

Snap-Loc

ARIANA Cool-Line

LEGROM-VARIO-System

Compatible with help of maxiflex®adapter (Order-No. ¼" = 27096, ½" = 27123). Fully compatible on both sides (external and internal ball) without adapter. Compatible with help of maxiflex®adapter (Order-No. ¼"= 27096, ½"= 27123).

Small version 1/4" is compatible with help of maxiflex adapter (order no. 27096) when using Varios outer ball and adapters inner ball.

Wiha world-wide

We speak your language…

Subsidiaries Distributors

Wiha ToolsLtd.

39, Sugarbrook Road, Aston Fields Ind. Estate, Bromsgrove, Worcs. B60 3DN Tel. +44 1527 57 57 58 Fax +44 1527 57 55 44 sales@wiha.com www.wiha.com

Wiha France

Z. A. de Terrefort F-33520 Bruges/ France Tel. +33 5 56 16 79 35 Fax +33 5 56 16 79 36 servicecommercial.wiha@wanadoo.fr www.wiha.com

Wiha Nordic A/S

Korskildelund 6 DK-2670 Greve Tel. +45 70 23 80 45 Fax +45 70 23 80 46 www.wiha.com

Willi Hahn S.A.

Avda. del Cobre, 15 E-28914 Leganés/Madrid Tel. +34 91 693 85 11 Fax +34 91 693 63 83 iberia@wiha.com www.wiha.com

Wiha Polska Sp. z o.o.

ul. Budowlanych 10 b PL-80-298 Gdańsk Tel. +48 58 762 38 30 Fax +48 58 762 39 00 info@wiha.pl www.wiha.com

Wiha Tools (India) Pvt. Ltd.

Jivan Vihar, 2nd Floor, 18, Modi Street, Fort, Mumbai – 400001, Maharashtra, India Tel. +91 22 226 944 14 Fax +91 22 226 989 36 info.in@wiha.com www.wiha.com

Willi Hahn Corp.

1348, Dundas Circle Monticello, MN 55362/USA Tel. +1 763 2 95 65 91 Fax +1 763 2 95 65 98 cservice@wihatools.com www.wihatools.com

Wiha Tools Canada Ltd.

249 Summerlea Road L6T 4X4 Brampton, ON Tel. +1 763-295-6591 Fax +1 763-295-6591 mihran@wihatools.com www.wihatools.com

Wiha Werkzeuge GmbH

Shanghai Rep. Office SHA Zhaofong Universe Building at 24th floor No. 1800 Zhongshangxie Road Shanghai / China Tel. +86 21 6440 1119 Fax +86 21 6440 1112 www.wihachina.com

Wiha Werkzeuge GmbH

Obertalstraße 3–7 D-78136 Schonach/Germany Tel. +49 7722 959-0 Fax +49 7722 959-159 Inland Fax +49 7722 959-155 Export info@wiha.com

www.wiha.com

More information on www.wiha.com

Technical modifications reserved!

Art-No.: 99061 807-9/08-5 Printed in Germany

Wiha Tools Manufacturing Tools User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual