Wiha Tools Flag and key handle User Manual

Wiha flag and key handle.

The knack of applying just the right amount of pressure.

www.wiha.com

Screwdrivers with flag or key handles
are used whenever replacing
indexable inserts on milling heads.
Thanks to the large support area for
thumb and index finger, it is possible
to loosen or tighten any screw with
comfort by applying just the right
amount of pressure.Thesetools
are also particularly suitable for
high-torque adjustment work

Innovative torsion blade
in sizes T5 to T10 does not damage
the expensive fastening screws or
the tool profile.

The small, 7-piece bench stand ensures
a tidy working environment.

Wiha flag and key handle.

Large support areas for thumb

•

and index finger on the
ergonomicallyshapedhandles.
The transmission of high
torques is thus quite simple

Cylindricalhandleshaftfor

•

quickturningofscrews

Innovative torsion blade

•

for T5 to T10 greatly reduces
the risk of breakage.Thus,
broken profilesin the screw
head are largely avoided.
If more torque than required is
applied, the blade responds
elastically(cf.picture)

Thanks to thin blades,

•

even covered screwsin the
screw axis can be turned

The flag and key handles have large
support surfaces for thumb and index
finger for ease of use and efficiency.

107