Wiha Tools Dead-blow hammer User Manual

Wiha dead-blow hammer.

A star in the world of recoilless tools.

Wiha has now put an end to the
familiar problemsassociatedwith
the stress on joints and muscles
when working with recoiling
hammers. The Wiha dead-blow
hammer has a special filling in the
hammer casing to prevent recoil.
Professionalswhouse these
hammers on a continuous basis, for
example, in tool and die shops or in
body maintenance and sheet-metal
work, appreciate the benefits of this
recoillesshammerfromWiha.

212

The face is made of medium-hard
polyurethane for full blows and protects
delicate surfaces and edges.

The special metal filling in the hammer
casing enables recoilless working.

Simple exchange of
worn hammer faces:

1. Grip the hammer in the vice,
lift to remove old hammer face.

2.Press the new hammer face
into the handle until it locks
into position.

Wiha dead-blow hammer.

•

Recoillessworkingdueto
special metal filling in the
hammer casing

•

The hammer weight is
increased by about 25%
for additional power

•

Easy on delicate surfaces and
edges as a result of its comfort
cushing surface

•

Availablewith hickorywood
handle or steel tube shaft

•

Facesand wooden handles
availableasspare parts

Wear safety glasses and protective
gloves when working with soft head
hammers.

In addition, observe the national
standards and regulations.