Wifi soft Services UM310N User Manual

P31 Basic Setting in Wireless

Wireless Status: On mean SSID on, Off mean SSID off.

2G Wireless Analyzer: Mainly to analyze the AP’s signal strength and channel, to make user more easy to choose the

channel with less wireless AP, then to avoid the wifi interface.

Band Width: 20MHz and 40MHz; 20MHz mean bandwidth is 144Mbps, but stronger penetration ability. 40MHz mean

bandwidth is 300Mbps, but some weaker in penetration ability and less stability when wifi interface strong.

21

P32 Wireless Analyzer

Virtual AP:

There are 3 virtual AP in 2.4G wireless, if need do multi SSID, then users can configure it showed in following picture:

P33 Virtual AP

22

Access Control:

Allow or deny the users access into this wireless AP based on MAC address

P34 MAC Access Control

Advanced Settings:

In this page, will show the regional, mode, RF Power, Max user access...

P35 Advanced Setting

Network:

In network, mainly to show the LAN setting and tag VLAN as follow:

In LAN Settings, mainly including static IP and DHCP.

23