Wienold Lifte MFC750/K, MFC750/Ks Operating Manual
OPERATING MANUAL
.de
-
MFC/K
MFC/Ks
MFC
Mini Floor Crane
Release: 1.4
14.Nov.2017
Contents
3
4
5
6
8
10
15
17
18
20
21
22
24
26
27
28
30
31
2
MFC Mini Floor Crane
Basic procedures
General description
MFC Series typ overview
COMPONENTS
MFC/Ks
MFC/K
SAFETY
Safety instructions
Pre-operation inspection
Working area inspection
Function tests
Operating instructions
INSTALLATIONS
MFC/Ks
MFC/K
OPERATION
Telescope and Hydraulic Cylinder
Lateral outrigger
Loading
Transportation
Technical data
Declaration of conformity
Copyright © Norbert Wienold GmbH 2015. All rights reserved.
Contact:
3
MFC Mini Floor Crane
The manufacturer‘s instructions and safety regulations.
The operating and safety instructions for this crane.
The inscriptions, labels and warning signs on this crane.
The safety instructions and operating instructions at the job site.
The current, local and legal safety regulations.
Basic Procedures
Please read and comply with:
This crane fulfils the current CE regulations and norms, EN
ISO 12100, as well as the machinery directive 2006/42/EG,
when used and operated according to the manufacturer‘s
recommendations.
It is the duty and responsibility of each operator to obey all
regional rules and regulations concerning the safe usage
of this crane.
Please read carefully and follow all of the safety
instructions for this appliance before
maintenance, repair or operation.
This is in compliance with all the manufacturer‘s
recommendations and all of the legal guidelines as
required by the government and local authorities.
In order to allow for a safe and appropriate use of this
crane, it may only be used by persons who have been
instructed by authorised specialists and who have been
granted operative authorisation.
Repairs and maintenance of this crane are only to be
undertaken by qualified and trained personnel without
exception.
This crane is subject to an annual UVV-inspection by an
authorised tester. Without a current UVV-test seal this
crane must not be operated.
The owners and anyone hiring/borrowing this crane
should have all construction parts undergo a complete
inspection. All of the crane‘s functions must be thoroughly
examined and inspected before sale or lease takes place.
Damaged and malfunctioning parts must be repaired or
replaced.
This operating manual is an essential requirement
for all operators of this equipment. For this reason
it must always remain in its appropriate place on
the crane and always be readily available.
Norbert Wienold GmbH is constantly developing and
improving this and other Wienold products.
For this reason our appliances and products may be
subject to modification without prior notice.
If you have any questions or queries, or if you notice any
mistakes and/or deviations concerning the contents of this
operating manual, please do not hesitate to contact us.
Norbert Wienold GmbH
Industriegebiet Waldstr. 35a
48488 Emsbüren
Tel. 0 59 03 - 93 94 0
Fax 0 59 03 - 93 94 50
www.wienold-lifte.de
e-mail: info@wienold-lifte.de
Der Mini Floor Crane consists of a chassis with crane
construction and extendable Telescope. The height of the
Telescope is determined by pumping on the hydraulic
cylinder.
The lowering speed of the Telescope is controlled by opening
the valve on the Hydraulic cylinder. The further the valve is
opened, the faster the Telesope lowers.
The extension of the Telescope is done manually and step by
step.
The MFC payload depends on:
a) Types
b) Telescope extension / Distance load center to front axle
d) Weight of attachment
The MFC offers two Models, differed by the outrigger
arrangement on the Chassis:
MFC/K: Two long outrigger with counterweights.
MFC/Ks (Shorty): Without outrigger, with counterweights.
MFC Wienold Mini Floor Crane
The MFC Installation is done as following:
MFC/K: Chassis with 2 long outrigger aligned rearwarded,
and 2 boxes with 14 weights each
MFC/ Ks: Chassis with 2 boxes, 14 weights each
To accommodate loads, the Mini Floor Crane is equipped
with a crane hook as standard.
Positioning of the MFC during operation has to be reduced to
minor and manually movements.
The Mini Floor Crane is not designed for continuous
operation. Never leave the Mini Floor Crane with the
telescope lifted. Never leave the MFC unattended.
Transportation of persons with the MFC is strictly prohibited!
Do not operate the MFC in areas where an explosion hazard
exists.
ALWAYS READ AND UNDERSTAND THE OPERATOR MANUAL BEFORE OPERATION!
All components must be checked for the specified payloads before use.
The payload of the MFC is generally depending on the extension of the Telescope.
Always take care for the ratio of PAYLOAD and TELESCOPE EXTENSION by considering the weight
of the used attachment.
Always observe the following for safe operation:
1. Load capacity of the MFC taking into account the Telescope extension
2. Payload of the attachment
3. Weight of the attachment
Copyright © Norbert Wienold GmbH 2016. All rights reserved.
4
MFC Mini Floor Crane
General Description
5
MFC Mini Floor Crane
MFC750 Models
Standard: without lateral outrigger
Standard:
MFC750/K
Chassis as long version with
2 long outrigger (aligned rearwarded)
2 Weight boxes with 14 weights each
Option: 2 lateral outrigger
With lateral outrigger:
Standard:
MFC750/Ks
Chassis in short version (Shorty)
2 Weight boxes with 14 weights each
Option: 2 lateral outrigger
With lateral outrigger:
Standard:
MFC750/K Outdoor
Long version with outdoor wheels
2 long outrigger (aligned rearwarded)
2 Weight boxes with 14 weights each
Option: 2 lateral outrigger
With lateral outrigger:
Operating Manual
MFC Mini Floor Crane
Components MFC750/Ks (Shorty)
1) Carry handle
2) Locking screw telescope
3) Adapter hydraulic cylinder
4) Telescope arm
5) Telescope
6) Telescope adjustment
7) Load hook
8) Hydraulic cylinder
9) Additional Hydraulic cylinder
10) Adapter main arm
11) Transport drillings
12) Mounting bolts
13) Swivel caster
14) Chassis
15) Support caster
16) Fixation / Drillings for long outrigger
17) Counterweights and Boxes
18) Steering bracket
19) Pump lever for hydraulic cylinder
20) Main arm
21) Fixing hole for transport position
22) Locking holes
6
MFC Mini Floor Crane
11
12
10
9
8
7
652
4
31
22
21
20
19
1
1
18
17
16
13 14 1315
16
2
11
Standard: Without Lateral Outrigger
Operating Manual
MFC Mini Floor Crane
3
7
MFC Mini Floor Crane
1) Carry handle
2) Locking screw telescope
3) Adapter hydraulic cylinder
4) Telescope arm
5) Telescope
6) Telescope adjustment
7) Load hook
Additional accessories:
11
12
10
9
8
7
652
4
31
22
21
20
19
1
1
18
17
16
13 14 1315
16
2
11
23
Components MFC750/Ks (Shorty)
With Optional Lateral Outrigger
8) Hydraulic cylinder
9) Additional Hydraulic cylinder
10) Adapter Main arm
11) Transport drillings
12) Mounting bolts
13) Swivel caster
14) Chassis
15) Support caster
16) Fixation / Drillings for long outrigger
17) Counterweights and Boxes
18) Steering bracket
19) Pump lever for hydraulic cylinder
20) Main arm
21) Fixing hole for transport position
22) Locking holes
23) Lateral outrigger
3
8
MFC Mini Floor Crane
Components MFC750/K
11
12
10
9
8
652
4
31
22
21
20
19
1
1
18
17
16
13 14 1315
2
11
7
2313
1) Carry handle
2) Locking screw telescope
3) Adapter hydraulic cylinder
4) Telescope arm
5) Telescope
6) Telescope adjustment
7) Load hook
8) Hydraulic cylinder
9) Additional Hydraulic cylinder
10) Adapter Main arm
11) Transport drillings
12) Mounting bolts
13) Swivel caster
14) Chassis
15) Support caster
16) Fixation / Drillings for long outrigger
17) Counterweights and Boxes
18) Steering bracket
19) Pump lever for hydraulic cylinder
20) Main arm
21) Fixing hole for transport position
22) Locking holes
23) Long outrigger
Operating Manual
MFC Mini Floor Crane
3
Standard: Without Lateral Outrigger
9
MFC Mini Floor Crane
Components MFC750/K
With Outdoor Wheels And Lateral Outrigger
11
12
10
9
8
652
4
31
22
21
20
19
1
1
18
17
16
13 1415
2
11
7
2313
25
1) Carry handle
2) Locking screw telescope
3) Adapter hydraulic cylinder
4) Telescope arm
5) Telescope
6) Telescope adjustment
7) Load hook
Additional accessories:
8) Hydraulic cylinder
9) Additional Hydraulic cylinder
10) Adapter Main arm
11) Transport drillings
12) Mounting bolts
13) Swivel caster
14) Chassis
15) Support caster
16) Fixation / Drillings for long outrigger
17) Counterweights and Boxes
18) Steering bracket
19) Pump lever for hydraulic cylinder
20) Main arm
21) Fixing hole for transport position
22) Locking holes
23) Long outrigger
24) Lateral outrigger
25) Outdoor wheels
Operating Manual
MFC Mini Floor Crane
3
24
10
MFC Mini Floor Crane
Safety Instructions
Operating Manual
MFC Mini Floor Crane
Non compliance with the instructions and safety rules in this
operating manual may result in serious injury or accidents
including death!
The personnel have been trained on this type of unit
and are deemed competent. All operators should read
the operating manual carefully.
1. Avoid hazardous situations.
Know and understand the safety regulations
before going on to the next section.
2. Always perform a pre-operation inspection on
the MFC.
3. Inspect the working area thoroughly before
using the MFC.
4. Always perform the function test as per the
operating manual prior to use.
5. Only use the MFC as per the operating instructions.
Any deviations are not acceptable. In case, you
must always contact the owner of the equipment.
Do Not Operate Unless:
Read, understand and obey:
a) the manufacturer‘s instructions and safety instructions.
b) the operating manuals and safety instructions for the MFC.
c) the inscriptions, labels and warning signs on the MFC.
d) the safety instructions and work procedures on the job site.
e) the relevant legislation in force for the equipment in use.
Loading...