Wieland WKN Catalog Page
142
Subject to change without further notice
selos
selos
Neutral disconnect blocks
for installation with U-foot, type WKN
Current carrying capability:
fine-stranded: 10 mm
2
45 A
stranded: 16 mm
2
50 A
Current carrying capability:
fine-stranded: 4 mm
2
25 A
solid: 6 mm
2
30 A
EN 60 947-7-1/DIN VDE 0611 T1
UL ratings/CSA ratings field/factory wiring
Width Wire strip length
Approvals
WKN 4 ETK/U
fine-stranded solid V A
0.5 – 4 mm20.5–6 mm2400 V/6 kV/3*
)
6 mm 9 mm
igw
WKN 10 ETK/U
fine-stranded
solid/stranded
VA
1 – 10 mm21–16 mm2400 V/6 kV/3*
)
10 mm 13 mm
igw
Type Part No.
Std. Pack
Type Part No.
Std. Pack
WKN 10 ETK/U 57.510.8155.0 50
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
APN 10 ETK 07.312.0955.0 10
WKI SH/U 01.108.3255.0 10
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
AD VB 10 GELB 04.326.2353.8 10
WKN 4 ETK/U 57.504.8155.0 100
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
APN 4 ETK 07.312.1155.0 10
WKI SH/U 01.108.3255.0 10
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
AD VB 4 GELB 04.326.2153.8 10
Neutral disconnect block blue
Connector clamps for busbar blue
unplated
Accessories
1. Mounting rail TS 35, DIN rail 7.5 mm high L = 2 m
Mounting rail TS 35, DIN rail, 15 mm high L = 2 m
Mounting rail TS 32, G rail L = 2 m
2. End clamp with U-foot 10 mm wide
End clamp TS 35, with screw 8 mm wide
End clamp TS 32, with screw 7.5 mm wide
3. End plate, 1.5 mm thick gray
blue
End plate, 2 mm thick gray
blue
4. Partition, 1.5 mm thick gray
blue
Partition, 2 mm thick gray
blue
Partition, 3 mm thick gray
blue
5.
Busbar support 10 x 3
4 mm wide
6. Busbar E-Cu, 10 x 3 L = 1 m
Busbar, tin-plated, 10 x 3 L = 1 m
7. Single cover for cross conn. with mark.facility
8. Partition plate with marking facility
Partition plate with cover
9. Cover strip for cross conn. over 10 blocks
Cover strip with warning symbol over 4 blocks
For more accessories see pages 216-229 and 238-243
For marking systems see pages 230-237
*) For use in grounded networks 690/400 V
143
Subject to change without further notice
Type Part No. Std. Pack Type Part No. Std. Pack Type Part No. Std. Pack
selos
Current carrying capability:
fine-stranded: 16 mm
2
62 A
stranded: 25 mm
2
67 A
WKN 16 ETK/U
fine-stranded
solid/stranded
VA
4 – 16 mm24 – 25 mm2400 V/6 kV/3*
)
12 mm 15 mm
igw
EN 60 998-2-1 CCA/CH EN 60 998-2-1 CCA/CH
WAK 35/2 BLAU 30.494.4021.6 100
WAK 35/2 30.494.4121.0 50
WAK 16/2 BLAU 30.494.3021.6 100
Connector clamps for Cu busbar
(10 x 3 mm), type WAK
WAK 16/2
fine-stranded stranded V A
1.5 – 16 mm210 – 16 mm
2
76
8.4 mm 16 mm
igW
WAK 35/2
fine-stranded stranded V A
16 – 35 mm216 – 35 mm
2
125
17 mm 14 mm
igW
WKN 16 ETK/U 57.516.8155.0 50
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
APN 16 ETK 07.312.0855.0 10
WKI SH/U 01.108.3255.0 10
9813 M
98.290.0000.0
1
9813 M SN 98.290.1000.0 1
AD VB 16 GELB 04.326.2453.8 10
WAK 35/2
WAK 16/2 BLAU
WAK 35/2 BLAU
Loading...