Wieland WKM Catalog Page
182
Subject to change without further notice
Type Part No. Std. Pack Type Part No. Std. Pack
selos
selos MINI
TS 15, Micro modular feed-through
blocks, type WKM
WKM 2,5 F1/15 55.503.1253.0 100
9021/15 x 5,5 EN 60715 98.090.0015.0 10
9208 S 15 Z5.522.7553.0 100
APM 2,5 F./15 07.311.0653.0 10
AD VB 2,5/15 GELB 04.326.3053.8 10
TSM 2,5/15 07.311.2853.8 10
WKM 2,5 F2/15 55.503.1353.0 100
9021/15 x 5,5 EN 60715 98.090.0015.0 10
9208 S 15 Z5.522.7553.0 100
APM 2,5 F./15 07.311.0653.0 10
For uninsulated cross connectors see page 222
AD VB 2,5/15 GELB 04.326.3053.8 10
TSM 2,5/15 07.311.2853.8 10
0344OII 2GD
EEx eII
EN 60 947-7-2/DIN VDE 0611 T3
UL ratings field/factory wiring
CSA ratings
KEMA 01 ATEX 2114 U1)EN 50019/EN 50014
Width Wire strip length
Approvals
WKM 2,5 F1/15
fine-stranded solid V A
0.5 – 2.5 mm20.5 – 4 mm2500 V/6 kV/3 24
5 mm 9 mm
z
WKM 2,5 F2/15
fine-stranded solid V A
0.5 – 2.5 mm20.5–4 mm2500 V/6 kV/3 24
5 mm 9 mm
z
The terminal blocks of series WKM 2,5 F1/15 and
WKM 2,5 F2/15 must be mounted alternately in
order to maintain the required air and creepage
distances for the indicated rated voltage.
For the current carrying capability of the mounting
rail see section facts & DATA.
When using selectable connecting links you have to
insert a partition which reduces the rated voltage to
400 V/6 kV/3.
All pictures on these two pages are
larger compared to the pictures of other
terminal blocks in the catalog.
1)
Please note the mounting instructions on page 126.
2)
with/without jumper
3)
Ratings to adjacent feed-through blocks of the same series and size
4)
For the current carrying capability of the mounting rail see section facts & DATA.
Feed-through blocks with solder connection gray
Feed-through block gray
Feed-through block blue
Ground block green/yellow
Accessories
1. Mounting rail 15, DIN rail 5.5 mm high L = 2 m
2. End clamp, Polyamide 7.5 mm wide
3. End plate 1.5 mm thick gray
blue
4. Partition 1.5 mm thick gray
blue
5. Cross connector with screws, E-Cu For uninsulated cross connectors see page 222
insulated (jumper) 2 pole
3 pole
to 12 pole
6. Single cover f. cross conn. with marking facility
7. Partition plate with marking facility
For more accessories see pages 216-229 and 238-243
For marking systems see pages 230-237
183
Subject to change without further notice
Type Part No. Std. Pack Type Part No. Std. Pack Type Part No. Std. Pack
selos
TS 15, Micro modular feed-through
blocks, type WKM
WKM 2,5/15 55.503.1053.0 100
WKM 2,5/15 BLAU 55.503.1053.6 100
9021/15 x 5,5 EN 60715 98.090.0015.0 10
9208 S 15 Z5.522.7553.0 100
APM 2,5 - 4/15 07.311.0853.0 10
APM 2,5 - 4/15 BLAU 07.311.0853.6 10
TWM 2,5 - 4/15 07.311.1853.0 10
TWM 2,5 - 4/15 BLAU 07.311.1853.6 10
For uninsulated cross connectors see page 222
AD VB 2,5/15 GELB 04.326.3053.8 10
TSM 2,5/15 07.311.2853.8 10
WKM 4 SL/15 55.504.9153.0 100
9021/15 x 5,5 EN 60715 98.090.0015.0 10
9208 S 15 Z5.522.7553.0 100
APM 4 SL/15 07.311.0753.0 10
For uninsulated cross connectors see page 222
WKM 4/15 55.504.1053.0 100
WKM 4/15 BLAU 55.504.1053.6 100
9021/15 x 5,5 EN 60715 98.090.0015.0 10
9208 S 15 Z5.522.7553.0 100
APM 2,5 - 4/15 07.311.0853.0 10
APM 2,5 - 4/15 BLAU 07.311.0853.6 10
TWM 2,5 - 4/15 07.311.1853.0 10
TWM 2,5 - 4/15 BLAU 07.311.1853.6 10
For uninsulated cross connectors see page 222
IVB WK 4 E/U-2 Z7.271.2227.0
10
IVB WK 4 E/U-3 Z7.271.2327.0
10
IVB WK 4 E/U-12 Z7.271.3227.0
10
AD VB 4/15 GELB 04.326.2953.8 10
TSM 4/15 07.311.2953.8 10
WKM 2,5/15
fine-stranded solid V A
0.5 – 2.5 mm20.5 – 4 mm2500 V/6 kV/3 25
No. 22-14 AWG 300 V 10
No. 22-12 AWG 600 V 25
0.5 – 2.5 mm20.5 – 4 mm
2
275 V 20/20
2)
5 mm 9 mm
üiztC+qkwh
WKM 4/15
fine-stranded solid V A
0.5 – 4 mm20.5–6 mm2500 V/6 kV/3 28
No. 22-10 AWG 600 V 30
No. 20-10 AWG 600 V 37
0.5 – 4 mm20.5–6 mm
2
275 V 21/27
2)
6 mm 9 mm
igC+qkwh
WKM 4 SL/15
fine-stranded solid V A
0.5 – 4 mm20.5 – 6 mm2500 V/6 kV/3
3) 4)
No. 22-14 AWG 300 V 30
No. 22-10 AWG
0.5 – 4 mm20.5 – 6 mm
2
6 mm 9 mm
gtC+qkwh
Loading...