Wieland WKI SL Catalog Page
194
Subject to change without further notice
selos
selos BIT
WK 4 SL/35 56.504.9055.0 100
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
AP 2,5-4 SL 07.311.7155.0 10
AD VB4 GELB 04.326.2153.8 10
AD VB 6/4 GELB 04.343.4856.8 10
Type Part No.
Std. Pack
Type Part No.
Std. Pack
WK 2,5 SL/35 56.503.9055.0 100
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
AP 2,5-4 SL 07.311.7155.0 10
AD VB 2,5 GELB 04.326.2053.8 10
AD VB 5/4 GELB 04.343.4756.8 10
EN 60 947-7-2/DIN VDE 0611 T3
UL ratings
CSA ratings
Width Wire strip length
Approvals
WK 2,5 SL/35
fine-stranded solid V A
0.5 – 2.5 mm20.5 – 4 mm2500 V/6 kV/3*
)
No. 22-12 AWG
No. 24-12 AWG
5 mm 9 mm
qw
WK 4 SL/35
fine-stranded solid V A
0.5 – 4 mm20.5 – 6 mm2800 V/8 kV/3*
)
No. 22-10 AWG
No. 22-10 AWG
6 mm 9 mm
Ground blocks with screw connection
for junction boxes, type WKI SL
*)Ratings of adjacent feed-through block
same series and size
Ground block with U-foot green/yellow
Ground block for TS 35 green/yellow
Accessories
1. Mounting rail TS 35, DIN rail 7.5 mm high L = 2 m
Mounting rail TS 35, DIN rail 15 mm high L = 2 m
2. End clamp for TS 35, with screw 8 mm wide
End clamp for TS 35, without screws 8 mm wide
3. End plate 1.5 mm thick gray
1.5 mm thick blue
1.5 mm thick green
End plate 2 mm thick gray
2 mm thick blue
2 mm thick green
4. Partition plate gray
blue
5. Cross connector with screws (jumper bar) 2 pole
insulated 3 pole
4 pole
5 pole
6 pole
6. Partition plate with marking facility yellow
7. Cover with marking facility yellow
8. Cover with warning symbol over 4 blocks yellow
Cover with warning symbol for 1 block yellow
9. Busbar
E-Cu 10 x 3 mm, tin-plated
, IN= 140 L = 1 m
E-Cu 10 x 3 mm, unplated
, IN= 140 A L = 1 m
10.Connector clamp for busbar
16 mm
2
8.5 mm wide
35 mm
2
17 mm wide
11.Busbar support 4 mm wide
Busbar support 8 mm wide
Marking accessories see page 230-237
selos
195
Subject to change without further notice
Type Part No.
Std. Pack
Type Part No.
Std. Pack
Type Part No.
Std. Pack
WKI 10 SL/35 56.510.9255.0 50
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
API 10-16 SL 07.311.9555.0 10
AD VB 10 GELB 04.326.2353.8 10
AD 10/1 GELB 04.325.8553.8 10
WKI 16 SL/35 56.516.9255.0 50
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
API 10-16 SL 07.311.9555.0 10
AD VB 16 GELB 04.326.2453.8 10
AD 16/1 GELB 04.325.8653.8 10
WKI 35 SL/35 56.535.9255.0 20
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
AD VB 10 GELB 04.326.2353.8 10
AD 35/1 GELB 04.325.8753.8 10
enclosed design
WKI 10 SL/35
fine-stranded solid/stranded V A
1 – 10 mm21.5 – 16mm2800 V/8 kV/3*
)
No. 16-6 AWG 600 V*
)
No. 16-6 AWG
10 mm 18 mm
qwW
WKI 16 SL/35
fine-stranded solid/stranded V A
1 – 16 mm21.5 – 25mm2400 V/6 kV/3*
)
No. 12-4 AWG 600 V*
)
12 mm 16 mm
qwW
WKI 35 SL/35
fine-stranded stranded V A
16 – 35 mm216 – 50 mm2400 V/6 kV/3*
)
No. 10-2 AWG
16 mm 13 mm
qwW
Ground blocks with screw connection
for junction boxes, type WKI SL
Loading...