Wieland WKI Catalog Page
192
Subject to change without further notice
selos
selos BIT
**)for use in grounded networks
Current carrying capability:
fine-stranded: 4 mm
2
25 A
solid: 6 mm
2
30 A
Current carrying capability:
fine-stranded: 10 mm
2
45 A
stranded: 16 mm
2
50 A
WKN 4 ETK/U 57.504.8155.0 100
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
APN 4 ETK 07.311.1155.0 10
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
WAK 16/2 BLAU 30.494.3021.6 100
WAK 35/2 30.494.4121.0 50
WKI SH/U 01.108.3255.0 10
WKIF SH/E/35 Z1.108.8453.0 100
WKI 10 ETK/U 57.510.8255.0 50
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
API 10-16 ETK/1 07.312.1955.0 10
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
WAK 16/2 BLAU 30.494.3021.6 100
WAK 35/2 30.494.4121.0 50
WKI SH/U 01.108.3255.0 10
WKIF SH/E/35 Z1.108.8453.0 100
Type Part No.
Std. Pack
Type Part No.
Std. Pack
EN 60 947-7-1/DIN VDE 0611 T1
UL ratings
CSA ratings
Width Wire strip length
Approvals
WKN 4 ETK/U
fine-stranded solid V A
0.5 – 4 mm20.5 – 6 mm2400 V/6 kV/3**
)
No. 20-10 AWG600 V 25
6 mm 9 mm
igw
WKI 10 ETK/U
fine-stranded
solid/stranded
VA
1–10 mm
2
1 –16 mm2400 V/6 kV/3**
)
No. 16-6 AWG 600 V 45
10 mm 13 mm
wW
Neutral disconnect blocks with screw connection
for junction boxes, type WKI
Neutral-disconnect block blue
Connector clamp for Cu busbar blue
unplated
Accessories
1. Mounting rail TS 35, DIN rail 7.5mm high L = 2 m
Mounting rail TS 35, DIN rail 15mm high L = 2 m
2. End clamp for TS 35, with screw 8 mm wide
End clamp for TS 35, without screws 8 mm wide
3. End plate 1.5 mm thick gray
1.5 mm thick blue
1.5 mm thick green
End plate 2 mm thick gray
2 mm thick blue
2 mm thick green
4. Partition plate gray
blue
5. Cross connector with screws (jumper bar) 2 pole
insulated 3 pole
4 pole
5 pole
6 pole
6. Partition plate with marking facility yellow
7. Cover with marking facility yellow
8. Cover with warning symbol over 4 blocks yellow
Cover with warning symbol for 1 block yellow
9. Busbar
E-Cu 10 x 3 mm, unplated
, IN= 140 L = 1 m
E-Cu 10 x 3 mm, tin-plated
, IN= 140 A L = 1 m
10.Connector clamp for busbar
16 mm
2
8.5 mm wide
35 mm
2
17 mm wide
11.Busbar support 4 mm wide
Busbar support 8 mm wide
Marking accessories see page 230-237
selos
193
Subject to change without further notice
Current carrying capability:
fine-stranded: 16 mm
2
62 A
stranded: 25 mm
2
67 A
EN 60 998-2-1 CCA/CH EN 60 998-2-1 CCA/CH
Type Part No.
Std. Pack
Type Part No.
Std. Pack
Type Part No.
Std. Pack
WKI 16 ETK/U 57.516.8255.0 50
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
API 10-16 ETK/1 07.312.1955.0 10
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
WAK 16/2 BLAU 30.494.3021.6 100
WAK 35/2 30.494.4121.0 50
WKI SH/U 01.108.3255.0 10
WKIF SH/E/35 Z1.108.8453.0 100
WAK 35/2 BLAU 30.494.4021.0 50
WAK 35/2 30.494.4121.0 50
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
WKI SH/U 01.108.3255.0 10
WKIF SH/E/35 Z1.108.8453.0 100
WAK 16/2 BLAU 30.494.3021.6 100
9813 M 98.290.0000.0 1
9813 M SN 98.290.1000.0 1
WKI SH/U 01.108.3255.0 10
WKIF SH/E/35 Z1.108.8453.0 100
WKI 16 ETK/U
fine-stranded
solid/stranded
VA
1–16 mm
2
1 – 25 mm2400 V/6 kV/3**
)
No. 14-4 AWG 600 V 65
12 mm 15 mm
wW
WAK 16/2
fine-stranded stranded V A
1.5 – 16 mm210 –16 mm
2
76
8.4 mm 16 mm
igW
WAK 35/2
fine-stranded stranded V A
16 – 35 mm216 – 35 mm
2
125
17 mm 14 mm
igW
Connector clamp for Cu busbar
(10 x 3 mm), type WAK
WAK 35/2
WAK 16/2 BLAU
WAK 35/2 BLAU
Loading...