Wieland WK 4/U F1, WK 4/U F2 Catalog Page

selos

selos

Feed-through blocks with solder connection

180

Subject to change without further notice

Type Part No. Std. Pack Type Part No. Std. Pack

EN 60 947-7-1/DIN VDE 0611 T1
UL ratings
CSA ratings
Width Wire strip length
Approvals

WK 4/U F1

fine-stranded solid V A

0.5 - 4 mm20.5 - 6 mm2400 V/6 kV/3 32
No. 22-10 AWG 300 V 30
No. 22-10 AWG 300 V 20
6 mm 9 mm

qw

WK 4/U F2

fine-stranded solid V A

0.5 - 4 mm20.5 - 6 mm2400 V/6 kV/3 32
No. 22-10 AWG 300 V 30
No. 22-10 AWG 300 V 20
6 mm 9 mm

qw

Feed-through terminal gray
same dimensions as WK4

Accessories

1. Mounting rail TS 35, DIN rail 7.5 mm high L = 2 m
Mounting rail TS 35, DIN rail 1.5 mm high L = 2 m
Mounting rail TS 32 G rail L = 2 m

2. End clamp with U-foot 10 mm wide
End clamp TS 35, with screw 8 mm wide
End clamp TS 32, with screw 7.5 mm wide

3. End plate, 1.5 mm thick gray

4. Partition, 1.5 mm thick

5. Cross connector with screws, E-Cu
insulated 2 pole

3 pole

to 12 pole

6.

Cover for jumper bar with marking capability

7. Partition plate

For marking systems see pages 230-237

WK 4/U F2 57.504.1155.0 100

35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S 35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
AP 2,5-4 07.311.0155.0 10
TW 2,5-4 07.311.1155.0 10

IVB WK 4-2 Z7.281.1227.0 10
IVB WK 4-3 Z7.281.1327.0 10
IVB WK 4-12 Z7.281.2227.0 10
AD VB 4 GELB 04.326.2153.8 10
TS 4 GELB 07.311.2153.8 10

WK 4/U F1 57.504.1055.0 100

35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S 35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
AP 2,5-4 07.311.0155.0 10
TW 2,5-4 07.311.1155.0 10

IVB WK 4-2 Z7.281.1227.0 10
IVB WK 4-3 Z7.281.1327.0 10
IVB WK 4-12 Z7.281.2227.0 10
AD VB 4 GELB 04.326.2153.8 10
TS 4 GELB 07.311.2153.8 10

Terminals WK 4/UF1 and WK 4/UF2 should be
mounted alternately in order to maintain the
creepages and clearances required for the
specific rated voltages.