Wieland WK 4/D Catalog Page

148

Subject to change without further notice

Type Part No. Std. Pack Type Part No. Std. Pack

selos

selos

Duo feed-through blocks,
type WK 4/D...

WK 4/D 1/2 /U 57.504.5055.0 100
WK 4/D 1/2 /U BLAU 57.504.5055.6 100

35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S 35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
AP 4/D 1/2 07.311.6455.0 10
AP 4/D 1/2 BLAU 07.311.6455.6

10

IVB WK 4 D...-2 Z7.281.7227.0 10
IVB WK 4 D...-3 Z7.281.7327.0 10
IVB WK 4 D...-12 Z7.281.8227.0 10

IVK WK 4/D...-2 Z7.256.2227.0 10
IVK WK 4/D...-12 Z7.256.3227.0 10

. AD VB 4 GELB 04.326.2153.8 10

TS 4/15 GELB 07.311.2953.8 10
AD VB 6/10 GELB 04.342.0656.8 10

WK 4/D 2/2 /U 57.504.5155.0 100
WK 4/D 2/2 /U BLAU 57.504.5155.6 100

35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S 35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
AP 4/D.. 07.311.6355.0 10
AP 4/D.. BLAU 07.311.6355.6 10

IVB WK 4 D...-2 Z7.281.7227.0 10
IVB WK 4 D...-3 Z7.281.7327.0 10
IVB WK 4 D...-12 Z7.281.8227.0 10

IVK WK 4/D...-2 Z7.256.2227.0 10
IVK WK4/D...-12 Z7.256.3227.0 10

AD VB 4 GELB 04.326.2153.8 10
TS 4/15 GELB 07.311.2953.8 10
AD VB 6/10 GELB 04.342.0656.8 10

0344OII 2GD
EEx eII
EN 60 947-7-1/DIN VDE 0611 T1
EN 60 947-7-2/DIN VDE 0611 T3
UL ratings field/factory wiring
CSA ratings
KEMA 01 ATEX 2114 U1)EN 50019/EN 50014
Width Wire strip length
Approvals

WK 4/D 1/2 /U

fine-stranded solid V A

0.5 – 4 mm20.5 – 6 mm2500 V/6 kV/3 30

No. 22-10 AWG 600 V 30
No. 20-10 AWG 600 V 30

0.5 – 4 mm20.5 – 6 mm

2

420 V 30/30

2)

6 mm 9 mm

agotC+qkwh

WK 4/D 2/2 /U

fine-stranded solid V A

0.5 – 4 mm20.5–6 mm2500 V/6 kV/3 30

No. 22-10 AWG 600 V 30
No. 20-10 AWG 600 V 30

0.5 – 4 mm20.5–6 mm

2

420 V 29/30

2)

6 mm 9 mm

agotC+qkwh

1)

Please note the mounting instructions on page 126.

2)

with/without jumper

3)

For the current carrying capability of the mounting rail see section facts + DATA * Do not use in Ex environments.

4)

Ratings to adjacent feed-through blocks of the same series and size

Duo feed-through block 1/2 gray

blue

Duo feed-through block 2/2 gray

blue

Duo multi-tier block gray
Duo ground block 2/2 green/yellow

Accessories

1. Mounting rail TS 35, DIN rail 7.5 mm high L = 2 m
Mounting rail TS 35, DIN rail, 15 mm high L = 2 m
Mounting rail TS 32, G rail* L = 2 m

2. End clamp with U-foot* 10 mm wide
End clamp TS 35, with screw 8 mm wide
End clamp TS 32, with screw* 7.5 mm wide

3. End plate, 1.5 mm thick gray

blue

4. Partition, 1.5 mm thick gray

5. Cross connector with screws, E-Cu
insulated (jumper) 2 pole

3 pole

to 12 pole

6. Jumper comb for lower tier blocks
insulated 2 pole

to 6 pole

Jumper comb, straight, 1mm thick 2 pole

to 6 pole

7. Single cover for cross conn. with marking facility

8. Partition plate with marking facility

9. Cover strip for cross conn. over 10 blocks
Cover strip with warn. symb. over 4 blocks

10. Cover with warning symbol
For more accessories see pages 216-229 and 238-243
For marking systems see pages 230-237

149

Subject to change without further notice

selos

Type Part No. Std. Pack Type Part No. Std. Pack

Duo feed-through blocks,
type WK 4/D...

5)

500 V/6 kV/3 with partition plate 07.311.2953.8 between
two adjacent blocks

6)

with partition plate 07.311.2953.8 between two adjacent
blocks

enclosed design

WK 4/D EU 57.504.5255.0 100

35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
WE 1/U Z5.523.5753.0 100
9708/2 S 35 Z5.522.8553.0 100
9708 Z5.522.7053.0 100
AP 4/D... 07.311.6355.0 10
AP 4/D.. BLAU 07.311.6355.6 10

IVB WK 4/DEU-2 Z7.271.0227.0 10
IVB WK 4 /DEU-3 Z7.271.0327.0 10
IVB WK 4/DEU-12 Z7.271.1227.0 10

IVK WK 4/D...-2 Z7.256.2227.0 10
IVK WK 4/D...-12 Z7.256.3227.0 10

AD VB 4 GELB 04.326.2153.8 10
TS 4/15 GELB 07.311.2953.8 10
AD VB 6/10 GELB 04.342.0656.8 10

WK 4/D 2/2 SL U 57.504.9155.0 100

35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1

WK 4/D EU

fine-stranded solid V A

0.5 – 4 mm20.5 – 6 mm2320 V/4 kV/35)22

No. 22-10 AWG 300 V

6)

30

No. 20-12 AWG 600 V

6)

30

0.5 – 4 mm20.5 – 6 mm

2

275 V 22/22

2)

6 mm 9 mm

agotC+qkwh

WK 4/D 2/2 SL U

fine-stranded solid V A

0.5 – 4 mm20.5 – 6 mm2500 V/6 kV/3

4) 3)

No. 22-10 AWG
No. 20-12 AWG

0.5 – 4 mm20.5 – 6 mm

2

6 mm 9 mm

agotC+qkwh