How it Works
Wieland
Loading...
WK 4
Catalog Page
2 pgs116.02 Kb0

Wieland WK 4 Catalog Page

150
Subject to change without further notice
Type Part No. Std. Pack Type Part No. Std. Pack
selos
selos
Multi-tier blocks type WK 4 E...
WK 4 E/U 57.404.7055.0 100
35 x 27 x 7,5 EN 60715 98.300.0000.0 1 35 x 24 x 15 EN 60715 98.360.0000.0 1 9006 EN 60715 G-32 98.190.0000.0 1 WE 1/U Z5.523.5753.0 100 9708/2 S 35 Z5.522.8553.0 100 9708 Z5.522.7053.0 100 AP 4 E 07.311.4055.0 10 TW 4 E 07.311.5055.0 10
9215-2 Z7.210.3227.0 50 9215-3 Z7.210.3327.0 50 9215-6 Z7.210.3627.0 50
IVBS WK 4 E-2 Z7.256.4227.0 10 IVBS WK 4 E-6 Z7.256.4627.0 10
IVB WK 4 E-2 Z7.255.2227.0 10 IVB WK 4 E-6 Z7.255.2627.0 10 AD VB 4/15 GELB 04.326.2953.8 10
AD VB 6/10 E GELB 04.342.2656.8 10
0344OII 2GD EEx eII EN 60 947-7-1/DIN VDE 0611 T1 EN 60 947-7-2/DIN VDE 0611 T3 UL ratings field/factory wiring CSA ratings KEMA 02 ATEX 2114 U1)EN 50019/EN 50014 Width Wire strip length Approvals
WK 4 E/U
fine-stranded solid V A
0.5 – 4 mm20.5 – 4 mm2400 V/6 kV/33)32
No. 22-10 AWG 300 V 20 No. 20-12 AWG 300 V 10
0.5 – 4 mm20.5 – 4 mm
2
275 V 24/24
2)
6 mm 9 mm
agotCf+qkwh
WK 4 E/U /VB
fine-stranded solid V A
0.5 – 4 mm20.5 –4 mm2400 V/6 kV/3 32
No. 22-10 AWG 300 V 20 No. 20-12 AWG 300 V 10
6 mm 9 mm
agotf+qw
1)
Please note the mounting instructions on page 126.
2)
with/without jumper
3)
With end plates 500 V/6 kV/3
4)
Ratings to adjacent feed-through blocks of the same series and size
5)
For the current carrying capability of the mounting rail see section facts + DATA * Do not use in Ex environments.
Multi-tier block gray Multi-tier block black
Multi-tier block
with inverted diode
orange
Multi-tier block red Ground block green/yellow
Accessories
1. Mounting rail TS 35, DIN rail 7.5 mm high L = 2 m Mounting rail TS 35, DIN rail, 15 mm high L = 2 m Mounting rail TS 32, G rail* L = 2 m
2. End clamp with U-foot* 10 mm wide End clamp TS 35, with screw 8 mm wide End clamp TS 32, with screw* 7.5 mm wide
3. End plate, 1.5 mm thick gray
4. Partition, 1.5 mm thick gray
5. Cross connector with screws, E-Cu uninsulated for top tier 2 pole
3 pole
to 6 pole
6. Jumper comb for lower tier block angled, 1 mm thick insulation 2 pole
to 6 pole Jumper comb for lower tier block straight, 1 mm thick insulated 2 pole
to 6 pole
7. Single cover for cross conn. with marking facility
8. Snap-in partition plate with marking facility
9. Cover strip for cross conn. over 10 blocks Cover strip with warning symbol over 4 blocks
For more accessories see pages 216-229 and 238-243 For marking systems see pages 230-237
151
Subject to change without further notice
selos
Type Part No. Std. Pack Type Part No. Std. Pack
Multi-tier blocks type WK 4 E...
WK 4 E/U... 57.404.XX55.9 100 WK 4 E/U... 57.404.XX55.5
100
enclosed design
WK 4 E SL/U
fine-stranded solid V A
0.5 – 4 mm20.5 – 6 mm2500 V/6 kV/3
4) 5)
No. 22-12 AWG No. 22-10 AWG
0.5 – 4 mm20.5 – 6 mm
2
6.2 mm 9 mm
gCqkwh
WK 4 E/U...
fine-stranded solid V A
0.5 – 4 mm20.5 –4 mm
2
No. 22-10 AWG No. 20-12 AWG
6 mm 9 mm
agotf+qw
57.404.8355.5
57.404.8055.9 with inverted diode
57.404.8255.5
57.404.8155.9 with inverted diode
57.404.7255.5 LED red
57.404.8755.5 LED green
57.404.7455.9 LED red
57.404.7955.5
57.404.8855.9 with inverted diodes
57.404.8455.5
57.404.6255.9
400 V
1 A/1000 V
400 V
1 A/1000 V
24 V DC R = 2.2 K
0.35 W
24 V DC R = 2.2 K
0.35 W
1 A/400 V
42 V AC 1 A/1000 V R = 6.8 K
0.6 W
24 V DC 1 A
R = 2.2 K
0.35 W
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use