Wieland Mounting rails Catalog Page

fasis

Mounting rails and end clamps for DIN rail terminal blocks

Mounting rail 35 x 7,5

according to DIN EN 60715

Type Part No. Std. Pack Type Part No. Std. Pack

Mounting rail

1. Steel, galv. zinc-plated and dichromated,
Steel, galv. zinc-plated and dichromated, slotted L = 2 m

2. Steel, unplated unslotted L = 2 m
Steel, unplated slotted L = 2 m

3. Steel, hot-galvanized unslotted L = 2 m
Steel, hot-galvanized slotted L = 2 m

4. E copper unslotted L = 2 m
E copper slotted L = 2 m

End clamp

5. End clamp for TS 35, with screw 8 mm wide

6. End clamp for TS 35, with screw 8/17,5 mm wide
with marking facility
for block assemblies

7. End clamp for TS 35, screwless 5 mm wide
End clamp for TS 35, screwless 8 mm wide

8. End clamp for TS 35, screwless 8/17,5 mm wide
with marking facility
for block assemblies

9. Marking tag with carrier wide

10. Marking card in perforated sheets wide
(1 sheet = 100 single tags)

11. Marking tag with carrier small

12. Marking card in perforated sheets small

13. End clamp 8 mm and marking set small

unslotted L = 2 m

35 x 27 x 7,5 EN 60715
35 x 27 x 7,5 EN 60715 gelocht
35 x 27 x 7,5 EN 60715 blank

98.300.0000.0 1

98.300.1000.0 1

98.300.0010.0 1

Mounting rail 35 x 15

according to DIN EN 60715

35 x 27 x 15 EN 60715 98.370.0000.0 1
35 x 27 x 15 EN 60715 98.370.1000.0 1

74