Page 1
WA-WF SERIES ENCLOSURES
NEMA 12 TWO DOOR WALL-MOUNT
C18
FEATURES-SPECIFICATIONS
Applications
Intended for use in housing electrical and
electronic controls, instruments, components, and associated wiring, these
enclosures incorporate double-hinged
doors which provide convenient access.
Designed for indoor use in protecting
components from dust, dirt, oil, and water.
Construction
• Bodies and doors fabricated from
14 gauge steel
• Continuously welded seams ground
smooth, less knockouts or holes
• Body stiffeners are added in larger
enclosures for extra rigidity
Industry Standards
UL 508, Type 12
CSA Certified, Type 12
NEMA/EEMAC Type 12
JIC EL-1-71
UL Files E64791
CSA File LL66078
• Rolled lip around all side of enclosure
opening is provided to exclude liquids
and contaminants
• Special overlapping door design
eliminates need for center post
• 3-point latching mechanism operates
with an oil-tight locking handle
• Doors are removable by pulling
heavy gauge continuous hinge pin
• Doors are sealed with closed cell
neoprene gasket
• Collar studs are provided for mounting
optional sub panels
• External mounting feet are provided
for mounting
CATALOG BODY/DOOR ENCLOSURE SIZE BACK PANEL BACK PANEL BACK PANEL
C
STIFFENER
NUMBER STEEL GAUGE H X W X D CATALOG NUMBER* STEEL GAUGE SIZE A X B
DOOR BODY
WA244208WF6 14/14
24.00x42.00x8.00
NP4224 12
39.00x21.00 1.50
NO NO
(610x1067x203) (991x533) (38)
WA244808WF 14/14
24.00x48.00x8.00
NP4824 12
21.00x45.00 1.50
NO NO
(610x1219x203) (533x1143) (38)
WA304210WF 14/14
30.00x42.00x10.00
NP4230 12
27.00x39.00 1.50
NO YES
(762x1067x254) (686x991) (38)
WA304810WF6 14/14
30.00x48.00x10.00
NP4830 12
45.00x27.00 1.50
NO YES
(762x1219x254) (1143x686) (38)
WA306010WF 14/14
30.00x60.00x10.00
NP6030 12
27.00x57.00 1.50
NO YES
(762x1524x254) (686x1448) (38)
WA364212WF 14/14
36.00x42.00x12.00
NP4236 12
33.00x39.00 1.50
NO YES
(914x1067x305) (838x991) (38)
WA364812WF 14/14
36.00x48.00x12.00
NP4836 12
33.00x45.00 1.50
NO YES
(914x1219x305) (838x1143) (38)
WA366012WF 14/14
36.00x60.00x12.00
NP6036 12
33.00x57.00 1.50
NO YES
(914x1524x305) (838x1448) (38)
WA424212WF 14/14
42.00x42.00x12.00
NPDD4242 12
39.00x39.00 1.50
NO YES
(1067x1067x305) (991x991) (38)
WA424812WF 14/14
42.00x48.00x12.00
NPDD4842 12
39.00x45.00 1.50
NO YES
(1067x1219x305) (991x1143) (38)
WA426012WF 14/14
42.00x60.00x12.00
NPDD4260 12
38.00x56.00 2.00
YES YES
(1067x1524x305) (965x1422) (51)
WA484812WF 14/14
48.00x48.00x12.00
NPDD4848 12
44.00x44.00 2.00
NO YES
(1219x1219x305) (1118x1118) (51)
WA-WF SERIES TWO DOOR ENCLOSURES
6 NEW PRODUCT IN 2003
*Back panels must be ordered separately.
• Grounding provisions provided
• Print pocket is provided
Finish
• ANSI-61 gray polyester powder
inside and out over phosphatized
surfaces
• Optional back panels are painted
white polyester powder over
phosphatized surfaces
Accessories
• Panels (reference tables)
• See pages J1- J19
WA244808WF
DATA SUBJECT TO CHANGE WITHOUT NOTICE
®
R
Page 2
WA-WF SERIES ENCLOSURES
NEMA 12 TWO DOOR WALL-MOUNT
C19
2.31
1.38
H-2.75
1.38
W-2.751.38 1.38
1.42
0.63
0.25
W/2-0.75
4.03
1.42
W/2-0.75
1.36
0.78
1.36
0.78
H-1.56
H
XX
1.81
3.75
H/2
D
D
Y
Y
A
B
C C
0.88
3.00
TYP
3.00
TYP
0.63
0.63
1.25
1.25
0.44
TYP
2.00
SECTION Y-Y
DOOR STIFFENERS
PROVIDED ON
WA426012WF ONLY.
CLEAR SPACE AVAILABLE
ON DOORS.
OMIT TWO MIDDLE STUDS
IF W < 31.00"
PANEL (Order
Separately)
OMIT TWO MIDDLE STUDS
IF H < 31.00"
OMIT BODY STIFFENER IF
H OR W = 28.00" OR LESS
MOUNTING FEET
1.38
D
1.16
0.19
0.75
1.38
12 GA.
1.09
14 GA.
SECTION X-X
14 GA.
MOUNTING FEET PANEL (Order Separately)
LEFT
DOOR
RIGHT
DOOR
NEOPRENE GASKET
CONTINUOUS HINGE
TYPICAL DOOR
STIFFENER
3/8 - 16 COLLAR STUD
0.88
C
C
Ø0.44 TYP
W-6.00
C
C
W
DATA SUBJECT TO CHANGE WITHOUT NOTICE
Page 3
NP SERIES BACK PANELS
ACCESSORY PANELS FOR NEMA 1, 3R, 12, 4 & 4X WALL-MOUNTS
I4
FEATURES-SPECIFICATIONS
Description
• Steel and stainless panels are
12 gauge
• Aluminum panels are 5052-H32
aluminum alloy, .080-inch thick
• Panel with any side over 17.00"
has 3/4" flange on all sides
• Steel panels are painted white
polyester powder
• Panels fit the following enclosures:
– NEMA 1, Large (NIC)
– NEMA 3R, Hinge Cover (RHC, Large)
– NEMA 4, 412, & 4X
Single Door (N12, N4, N412, SSN4)
– NEMA 12
2-Door Wall-Mount, (WAWF),
Single Door
Right Flange Disconnect
(SDN12, ABN12)
Large JIC (B-CH, Large)
Single door N12
CATALOG NUMBER
PAINTED STEEL 316 STAINLESS PANEL SIZE A X B
(WHITE) STEEL
ALUMINUM
NP1212 — — 9.00X9.00 (229X229)
NP1224 — — 9.00X21.00 (229X533)
NP1612 NP1612SSA ALNP1612 13.00X9.00 (330X229)
NP1616 NP1616SSA ALNP1616 13.00X13.00 (330X330)
NP1620 — — 17.00X13.00 (432X330)
NP2012 — — 17.00X9.00 (432X229)
NP2016 NP2016SSA ALNP2016 17.00X13.00 (432X330)
NP2024 — 21.00X17.00 (533X432)
NP2020 NP2020SSA ALNP2020 17.00X17.00 (432X432)
NP2412 — — 21.00X9.00 (533X229)
NP2416 NP2416SSA — 21.00X13.00 (533X330)
NP2420 NP2420SSA ALNP2420 21.00X17.00 (533X432)
NP2424 NP2424SSA ALNP2424 21.00X21.00 (533X533)
NP2430 — — 27.00X21.00 (686X533)
NP3016 — — 27.00X13.00 (686X330)
NP3020 NP3020SSA — 27.00X17.00 (686X432)
NP3024 NP3024SSA ALNP3024 27.00X21.00 (686X533)
NP3030 NP3030SSA — 27.00X27.00 (686X686)
NP3036 — — 33.00X27.00 (838X686)
NP3042 — — 39.00X27.00 (991X686)
NP3624 NP3624SSA ALNP3624 33.00X21.00 (838X533)
NP3630 NP3630SSA ALNP3630 33.00X27.00 (838X686)
NP3636 NP3636SSA — 33.00X33.00 (838X838)
NP3642 — — 39.00X33.00 (991X838)
NP4024 — — 37.00X21.00 (940X533)
NP4224 — — 39.00X21.00 (991X533)
NP4230 NP4230SSA — 39.00X27.00 (991X686)
NP4236 NP4236SSA — 39.00X33.00 (991X838)
NP4824 — — 45.00X21.00 (1143X533)
NP4830 — — 45.00X27.00 (1143X686)
NP4836 NP4836SSA ALNP4836 45.00X33.00 (1143X838)
NP6030 — — 57.00X27.00 (1448X686)
NP6036 NP6036SSA ALNP6036 57.00X33.00 (1448X838)
NP7230 — — 69.00X27.00 (1753X686)
NP7236 — — 69.00X33.00 (1753X838)
BACK PANELS FOR NEMA 1, 3R, 12, 4 & 4X WALL-MOUNT ENCLOSURES
B
A
Ø .563 TYP.
.875 TYP.
.875 TYP.
IF "A" IS LESS THAN 31"
OMIT MIDDLE HOLES
IF "B" IS LESS THAN 31"
OMIT MIDDLE HOLES
(SEE TABLE)
SIDE FLANGES
.75
TOP VIEW
SIDE VIEW
FRONT VIEW
2.0
2.0
Ø .312 TYP. (2PL)
GROUND HOLE
DATA SUBJECT TO CHANGE WITHOUT NOTICE
NP1212
Page 4
DATA SUBJECT TO CHANGE WITHOUT NOTICE
NPDD SERIES BACK PANELS
ACCESSORY PANELS FOR DOUBLE DOOR FLOOR-MOUNT ENCLOSURES
I6
Description
• Steel panels are fabricated from
10 gauge carbon steel
• Panels are painted with a white
polyester powder
• Panels are used in NEMA 12
double door floor-mounted
enclosures and some 2-door
wall-mount enclosures
FRONT VIEW
SIDE VIEW
PANEL
10 GA.
C
C
0.88 TYP
0.88 TYP
B
A
0.88
FLANGE
4 PL
0.563 Ø
TYP
CATALOG NUMBER
PAINTED STEEL (WHITE)
NPDD4242 39.00x39.00 (991x991)
NPDD4260 38.00x56.00 (965x1422)
NPDD4842 45.00x39.00 (1143x991)
NPDD4848 44.00x44.00 (1118x1118)
NPDD5442 50.00x38.00 (1270x965)
NPDD6048 44.00x56.00 (1118x1422)
NPDD6060 56.00x56.00 (1422x1422)
NPDD7260 56.00x68.00 (1422x1727)
NPDD7272 68.00x68.00 (1727x1727)
BACK PANELS FOR DOUBLE DOOR FLOOR-MOUNTED ENCLOSURES
FEATURES-SPECIFICATIONS
NPDD4242
PANEL SIZE A X B
Loading...