Wiegmann WA-SOF SERIES SWING-OUT RACKS Catalog Page
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SOF SERIES SWING-OUT RACKS
ACCESSORY SWING-OUT RACKS FOR FREESTANDING ENCLOSURES
I11
FEATURES-SPECIFICATIONS
Description
• Fabricated from 10 gauge steel,
these swing-out rack mounting
frames are available for mounting
rack mounting equipment. Mounting
holes are tapped with #10-32
threads spaced per E.I.A. standard
• Panels are painted with a white
polyester powder
CATALOG NUMBER
FITS ENCLOSURE
RACK SIZE
USABLE ANGLE
H X W LENGTH “T”
WA7230S0F19 72.00x30.00 (1829x762) 19.00 (483) 57.88 (1470)
WA7236S0F19 72.00x36.00 (1829x914) 19.00 (483) 57.88 (1470)
WA9036S0F19 90.00x36.00 (2286x914) 19.00 (483) 75.38 (1915)
SWING-OUT RACKS FOR FREESTANDING ENCLOSURES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
Quick Release
Latches Provided
T
Usable
Length
Frame Can Be Positioned
Anywhere Front to Back
Enclosure Side
Removed For Clarity
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Hole Detail
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SOF SERIES RACK ANGLES
ACCESSORY RACK COMPONENTS FOR FREESTANDING ENCLOSURES
I12
FEATURES-SPECIFICATIONS
Type RP
For Free Standing NEMA 12 Enclosures
• Fabricated from 10 gauge steel
• Full-length or half-length rack
mounting angles are available for
mounting rack-mounted equipment
• If used in Two-Door Enclosures
a center panel support must be
ordered
• Finish is a white polyester powder
Type RA
For all Free Standing NEMA 12 and
NEMA 4 Enclosures
• Designed for mounting 19 inch and
24 inch rack mounted equipment
• Through holes (7/32 Dia.) are provided
and require a W1032N clip nut
(must be ordered separately)
• Rack angles are mounted on unistrut
within the Free Standing enclosures
and are adjustable
• If used in Two-Door Enclosures
a center panel support must be
ordered
• Finish is a white polyester powder
CATALOG NUMBER STEEL GAUGE LENGTH “L”
WA60RP24F5 10 49.00 (1245)
WA60RP24F6 10 26.25 (667)
WA72RP24F5 10 61.25 (1556)
WA72RP24F6 10 31.50 (800)
WA72RP30F5 10 61.25 (1556)
WA72RP30F6 10 31.50 (800)
WA90RP24F5 10 78.75 (2000)
WA90RP24F6 10 40.25 (1022)
RELAY RACK ANGLES
CATALOG NUMBER FITS ENCLOSURE H X W RACK SIZE ANGLE LENGTH “L”
WA60RA19TH 60.00x24.00 (1524x610) 19.00 (483) 49.00 (1245)
WA72RA19TH 72.00x24.00 (1829x610) 19.00 (483) 61.25 (1556)
WA72RA24TH 72.00x30.00 (1829x762) 24.00 (610) 61.25 (1556)
WA90RA19TH 90.00x24.00 (2286x610) 19.00 (483) 78.78 (2001)
WA-RA RELAY RACK ANGLES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
Standard E.I.A.
Spacing
Standard E.I.A.
Spacing
D & T 10- 32
Loading...