Wiegmann WA-FS SERIES ENCLOSURES Catalog Page
WA-FS SERIES ENCLOSURES
NEMA 12 SINGLE DOOR FREESTANDING
C24
FEATURES-SPECIFICATIONS
Applications
Designed to protect electrical and
electronic controls, components, and
instruments in typical industrial environments. Enclosures protect enclosure
equipment from dust, dirt, oil, and
dripping water. These enclosures are
used in machine tool applications for
housing motor starters, drives, contactors,
PLC’s, as well as a wide variety of other
electrical and electronic equipment.
The addition of 19-inch rack mounting
accessories make these enclosures
ideal for providing rugged protection
for sensitive rack mounted components
in harsh industrial environments. The
enclosures are found extensively in
automotive, pulp and paper, wood
products, textile, and similar industries.
Four styles are available to provide
maximum flexibility:
a) Single Door Single Access
(single door on front)
Industry Standards
UL 508, Type 12
CSA Certified, Type 12
NEMA/EEMAC Type 12
UL Files E64791
CSA File LL66078
b) Single Door Dual Access
(single door on front and rear)
c) Two Door Single Access
(overlapping doors on front)
d) Two Door Dual Access
(overlapping doors on front and rear)
Construction
• Fabricated from 12 or 10 gauge steel
• Continuously welded seams ground
smooth, less holes or knockouts
• Body stiffeners for added rigidity
• Heavy duty lifting eyes for easy handling
• Heavy gauge continuous hinges
support each door
• 3 point latching mechanism with
an oil-tight key locking handle is
provided
• Print pocket is provided
• “Uni-strut” mounting channels are
welded horizontally to interior body
CATALOG BODY/DOOR ENCLOSURE SIZE
AF
NUMBER STEEL GAUGE H X W X D
WA602418FS 12/12 60.12x24.12x18.12 (1527x613x460) 23.13 (587) 32.06 (814)
WA722418FS 12/12 72.12x24.12x18.12 (1832x613x460) 29.13 (740) 38.06 (967)
WA723018FS 12/12 72.12x30.12x18.12 (1832x765x460) 29.13 (740) 38.06 (967)
WA723618FS 12/12 72.12x36.12x18.12 (1832x917x460) 29.13 (740) 38.06 (967)
WA902420FS 10/10 90.12x24.12x20.12 (2289x613x511) 38.13 (968) 47.06 (1195)
WA903620FS 10/10 90.12x36.12x20.12 (2289x917x511) 38.13 (968) 47.06 (1195)
WA603624FS 12/12 60.12x36.12x24.12 (1527x917x613) 23.13 (587) 32.06 (814)
WA722424FS 12/12 72.12x24.12x24.12 (1832x613x613) 29.13 (740) 38.06 (967)
WA723024FS 12/12 72.12x30.12x24.12 (1832x765x613) 29.13 (740) 38.06 (967)
WA723624FS 12/12 72.12x36.12x24.12 (1832x917x613) 29.13 (740) 38.06 (967)
WA903624FS 10/10 90.12x36.12x24.12 (2289x917x613) 38.13 (968) 47.06 (1195)
WA723630FS 12/12 72.12x36.12x30.12 (1832x917x765) 29.13 (740) 38.06 (967)
WA723636FS 12/12 72.12x36.12x36.12 (1832x917x917) 29.13 (740) 38.06 (967)
WA903636FS 10/10 90.12x36.12x36.12 (2289x917x917) 38.13 (968) 47.06 (1195)
WA-FS SERIES FREESTANDING SINGLE DOOR ENCLOSURE
WA603624FS
sides and top, bottom and center
to allow back panels to be positioned in enclosure. Optional swing,
half, full and rack panels
can be mounted anywhere along
“uni-strut” channel
• Doors are sealed with closed cell
neoprene gasket
• Stiffeners are welded to back of two
door enclosures to maintain flatness
and increase rigidity
• Grounding provisions provided
Finish
• ANSI 61 gray polyester powder
inside and out over phosphatized
surfaces.
• Optional back panels are white
polyester powder over phosphatized
surfaces.
Accessories
• See pages J1-J19
DATA SUBJECT TO CHANGE WITHOUT NOTICE
®
R
WA-FS SERIES ENCLOSURES
NEMA 12 SINGLE DOOR FREESTANDING
C25
DATA SUBJECT TO CHANGE WITHOUT NOTICE
1.81
D
MOUNTING
CHANNEL
X
A
1.00
TYP
X
W-2.25
1.62
A
8.09
SECTION X-X
W
0.81
1.75
1.75
H
1.38
1.75
6.94
H-10.75
OPENING
7.38
W-1.69
3.38
2.38
W-2.75
OPENING
4.03
H-9.88
1.38
CLEAR SPACE
AVAILABLE
1.16
3.75
F
Loading...