Wiegmann WA-FSN43PT User Manual
Section D Index
D1
BN4 Series
NEMA 4 JIC Lift-Off Cover Wall-Mount....D2
BN4-CH Series
NEMA 4 JIC Continuous Hinged
Wall-Mount .............................................D4
WA-GSC Series
NEMA 3 & 4 Screw Cover
Moisture Proof ........................................D6
BCHFTC Series (NEMA 12 & 4)
JIC Continuous Hinge Wall-Mount ........C15
N412-C ULTIMATE Series
NEMA 4 & 12 Single Door Wall-Mount ....D8
NEMA 4 ENCLOSURES
N412-WC ULTIMATE Series
NEMA 4 & 12 Single Door with
Window Wall-Mount ..............................D11
N412-3PTC Series
NEMA 4 Single Door with
3PT Handle...........................................D14
N412-CST Series
NEMA 4 & 12 Slope Top Single Door
Wall-Mount............................................D16
N4 Series
NEMA 4 Single Door Wall-Mount...........D18
N4D Series
NEMA 4 Floor-Mount.............................D20
N4S-FS Series
NEMA 4 Single Door Freestanding .......D22
N4D-3PT Series
NEMA 4 Two Door Floor-Mount with
3PT Handle...........................................D24
WA-FSN43PT Series
NEMA 4 Single Door, Freestanding with
3PT Handle...........................................D26
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
D2
BN4 SERIES ENCLOSURES
NEMA 4 JIC LIFT-OFF COVER WALL-MOUNT
Industry Standards
UL 50, Types 4, 12 & 13
(6X6X4&above)
UL 508, Types4,12&13
(6X4X3&smaller)
CSA Certified, Types 4 & 12
NEMA/EEMAC Type 4, 12 & 13
JIC EL-1-71
UL Files E23553, E64791
BN4060604
FEATURES-SPECIFICATIONS
Applications
Designed for use as instrument
housings, electrical control enclosures,
terminal wiring boxes or electrical
junction boxes. Provides protection
where equipment is hosed down, very
wet, or in outdoor applications.
Construction
• Bodies 14 gauge and doors fabricated from 16 gauge steel
• Continuously welded seams ground
smooth, less knockouts or holes
BN4 SERIES JIC LIFT OFF COVER ENCLOSURES
CATALOG ENCLOSURE SIZE
NUMBER H X W X D
BN4040403
BN4060403
BN4060604
BN4080603
BN4100804
BN4121005
BN4141206
BN4161406
*Back panels must be ordered separately.
4.00x4.00x3.00
(102x102x76) (121x51) (140x143) (64) (109) (76) (35) (35) (64) (16) (110)
6.00x4.00x3.00
(152x102x76) (124x73) (171x51) (191x143) (64) (109) (76) (14) (35) (60) (64) (16) (160)
6.00x6.00x4.00
(152x152x102) (124x124) (171x102) (191x194) (90) (160) (127) (14) (60) (60) (90) (16) (160)
8.00x6.00x3.50
(203x152x89) (175x124) (222x102) (241x194) (77) (160) (127) (14) (60) (86) (77) (16) (211)
10.00x8.00x4.00
(254x203x102) (226x175) (273x152) (292x244) (90) (211) (178) (14) (86) (38) (90) (16) (262)
12.00x10.00x5.00
(305x254x127) (276x226) (324x203) (343x295) (115) (262) (229) (14) (51) (76) (115) (16) (313)
14.00x12.00x6.00
(356x305x152) (327x276) (375x254) (394x346) (141) (313) (279) (14) (51) (76) (141) (16) (364)
16.00x14.00x6.00
(406x356x152) (378x327) (425x305) (445x397) (141) (363) (330) (14) (89) (38) (141) (16) (414)
BACK PANEL
CATALOG NUMBER*
WHITE “G”
—— —
P0604 P0604G
P0606 P0606G
P0806 P0806G
P1008 P1008G
P1210 P1210G
P1412 P1412G
P1614 P1614G
CSA File LL66078
• Closed cell oil resistant neoprene
gasket
• External mounting plate, top and
bottom of enclosure
• Weldnuts are provided on models
6.00" x 4.00" or larger to secure
optional panel
• Stainless steel screws and clamps
on four sides of cover to assure
water tight seal
• Grounding provisions provided
Finish
• ANSI-61 gray polyester powder
inside and out
• Optional back panels are white
polyester powder
• Optional “G” panels have a con-
ductive finish (See page I2)
Acces sorie s
• Back panels (reference tables)
• See pages J1-J22
• Optional back panels and terminal
kits must be ordered separately
BACK PANEL MOUNTING OVERALL
SIZE A X B C X E L X M
4.75x2.00 5.50x5.63 2.53 4.31 3.00
4.88x2.88 6.75x2.00 7.50x5.63 2.53 4.31 3.00 0.56 1.38 2.38 2.53 0.63 6.31
4.88x4.88 6.75x4.00 7.50x7.63 3.53 6.31 5.00 0.56 2.38 2.38 3.53 0.63 6.31
6.88x4.88 8.75x4.00 9.50x7.63 3.03 6.31 5.00 0.56 2.38 3.38 3.03 0.63 8.31
8.88x6.88 10.75x6.00 11.50x9.63 3.53 8.31 7.00 0.56 3.38 1.50 3.53 0.63 10.31
10.88x8.88 12.75x8.00 13.50x11.63 4.53 10.31 9.00 0.56 2.00 3.00 4.53 0.63 12.31
12. 88 x10.88 14.75x10.00 15 .50x13.63 5.53 12.31 11.00 0.56 2.00 3.00 5.53 0.63 14.31
14. 88 x12.88 16.75x12.00 17 .50x15.63 5.53 14.31 13.00 0.56 3.50 1.50 5.53 0.63 16.31
FGI JKNOPQ
1.38 1.38 2.53 0.63 4.31
—
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
BN4 SERIES ENCLOSURES
NEMA 4 JIC LIFT-OFF COVER WALL-MOUNT
D3
W
Ø 0.31
TYP
0.38
X
0.44
0.31 TYP
E
J
Q
F
L
A
C
SECTION X-X
P
O
14 GA.
X
0.750.75 H
0.560.31 TYP
0.50
B
I
0.38
D
Pane l (Order Separately)
Notes:
1. Panels are 14 Ga. steel.
2. Panel screws are #10-32 Pan Head.
M
G
CLAMP BRACKET LOCATIONS
BODY
BODY
1. 2 5
BN4040403
BN4060403
BN4060604
BODY
BN4080603
N
BN4121005
BN4141206
K
K
K
CLAMP
BRACKET
NN
CLAMP
BRACKET
1.25
CLAMP
BRACKET
BN4100804
K
BODY
K
BN4161406
K
C
1. 2 5
NN
CLAMP
BRACKET
1. 2 5
NN
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
D4
BN4 - CH SERIES ENCLOSURES
NEMA 4 JIC CONTINUOUS HINGED WALL-MOUNT
FEATURES-SPECIFICATIONS
BN4060604CH
Industry Standards
UL 50, Types4,12&13
CSA Certified, Types 4 & 12
NEMA/EEMAC Type 4, 12 & 13
JIC EL-1-71
UL File E6924, E64791
CSA File LL66078
Applications
• External mounting plates, top and
Designed for use as instrument
housings, electrical control enclosures,
• Weldnuts are provided on models
terminal wiring boxes or electrical
junction boxes. Provides protection
in areas that are hosed down or very
wet or in outdoor applications.
• Continuous hinged cover is
Construction
• Bodies 14 gauge and doors fabricated from 16 gauge steel
• Cover removable by pulling stain-
• Continuously welded seams ground
smooth, less knockouts or holes
• Closed cell oil resistant neoprene
• Grounding provisions provided
• Optional back panels and terminal
gasket
BN4-CH SERIES JIC CONTINUOUS HINGED ENCLOSURES
CATALOG ENCLOSURE SIZE
NUMBER H X W X D
BN4040403CH
BN4060403CH
BN4060604CH
BN4080603CH
BN4100804CH
BN4100806CH
BN4121005CH
BN4121206CH
BN4141206CH
BN4161406CH
*Back panels must be ordered separately.
4.00x4.00x3.00
(102x102x76) (121x51) (140x127) (64) (109) (76) (35) (35) (64) (110) (45)
6.00x4.00x3.00
(152x102x76) (124x73) (171x51) (191x127) (64) (109) (76) (14) (35) (60) (64) (160) (45)
6.00x6.00x4.00
(152x152x102) (124x124) (171x102) (191x178) (90) (160) (127) (14) (60) (60) (90) (160) (71)
8.00x6.00x3.50
(203x152x89) (175x124) (222x102) (241x178) (77) (160) (127) (14) (60) (86) (77) (211) (58)
10.00x8.00x4.00
(254x203x102) (226x175) (273x152) (292x229) (90) (211) (178) (14) (86) (38) (90) (262) (71)
10.00x8.00x6.00
(254x203x152) (226x175) (273x152) (292x229) (141) (211) (178) (14) (86) (38) (141) (262) (121)
12.00x10.00x5.00
(305x254x127) (276x226) (324x203) (343x279) (115) (262) (229) (14) (51) (76) (115) (313) (96)
12.00x12.00x6.00
(305x305x152) (276x276) (324x254) (343x330) (141) (313) (279) (14) (64) (64) (141) (313) (121)
14.00x12.00x6.00
(356x305x152) (327x276) (375x254) (394x330) (141) (313) (279) (14) (51) (76) (141) (364) (121)
16.00x14.00x6.00
(406x356x152) (378x327) (425x305) (445x381) (141) (363) (330) (14) (89) (38) (141) (414) (121)
BACK PANEL
CATALOG NUMBER*
WHITE “G”
—— —
P0604 P0604G
P0606 P0606G
P0806 P0806G
P1008 P1008G
P1008 P1008G
P1210 P1210G
P1212 P1212G
P1412 P1412G
P1614 P1614G
bottom of enclosure
• ANSI-61 gray polyester powder
inside and out
Fini sh
6.00" x 4.00" and larger to secure
optional panel
• Optional back panels are white
polyester powder
• Optional “G” panels have a con-
secured on three sides with stain-
ductive finish (See page I2)
less steel screws and clamps to
assure a watertight seal
Accessories
• Back panels (reference tables)
less steel hinge pin
• See pages J1-J22
kits must be ordered separately
BACK PANEL MOUNTING OVERALL
SIZEAXB CXE LXM
4.75x2.00 5.50x5.00 2.53 4.31 3.00
4.88x2.88 6.75x2.00 7.50x5.00 2.53 4.31 3.00 0.56 1.38 2.38 2.53 6.31 1.78
4.88x4.88 6.75x4.00 7.50x7.00 3.53 6.31 5.00 0.56 2.38 2.38 3.53 6.31 2.78
6.88x4.88 8.75x4.00 9.50x7.00 3.03 6.31 5.00 0.56 2.38 3.38 3.03 8.31 2.28
8.88x6.88 10.75x6.00 11.50x9.00 3.53 8.31 7.00 0.56 3.38 1.50 3.53 10.31 2.78
8.88x6.88 10.75x6.00 11.50x9.00 5.53 8.31 7.00 0.56 3.38 1.50 5.53 10.31 4.78
10.88 x 8 . 8 8 12. 7 5 x 8 .0 0 13.50x11.00 4. 5 3 10.31 9 . 0 0 0. 5 6 2.00 3.00 4.53 12.31 3.78
10.8 8 x 10. 8 8 12.75x10.00 13.50x13.00 5. 53 12.31 11 .0 0 0 .56 2 .50 2 . 5 0 5.53 12.31 4.78
12.88 x 1 0 . 8 8 14.75x10.00 15.50x13.00 5.53 12 .3 1 11.00 0.56 2.00 3 . 0 0 5.53 14.31 4.78
14.8 8 x12.88 16.75x12.00 17.50x15.00 5.53 14.31 13.00 0.56 3.50 1.50 5.53 16.31 4.78
FG IJKNOPQ
1.38 1.38 2.53 4.31 1.78
—
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
BN4 - CH SERIES ENCLOSURES
NEMA 4 JIC CONTINUOUS HINGED WALL-MOUNT
D5
W
Ø 0.31
TYP
0.38
F
X
0.44
0.31 TYP
0.31 TYP
E
J
P
L
A
C
SECTION X-X
O
0.56
B
0.63
X
0.38
0.750.75 H
0.50
I
D
14 GA.
Pane l (Order Separately)
Notes:
1. Panels are 14 Ga. steel.
2. Panel screws are #10-32 Pan Head.
M
G
0.75
Q
CLAMP BRACKET LOCATIONS
BODY
1. 2 5
BN4040403CH
BN4060403CH
BN4060604CH
BN4080603CH
K
N
BODY
K
BN4121005CH
BN4121206CH
BN4141206CH
K
CLAMP
BRACKET
K
CLAMP
BRACKET
K
1. 2 5
K
NN
BODY
BN4100804CH
BN4100806CH
BODY
BN4161406CH
C
CLAMP
BRACKET
1.25
NN
CLAMP
BRACKET
1. 2 5
NN
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
D6
WA - GSC SERIES ENCLOSURES
NEMA 3 & 4 SCREW COVER MOISTURE PROOF
WA060604GSC WA060604GSCG
FEATURES-SPECIFICATIONS
Industry Standards
UL50, Types3&4
NEMA/EEMAC Type3&4
UL File E23553
Applications
Designed for use as a wiring box,
junction box, pull box, and terminal
box in many indoor or outdoor
applications where dust or moisture
is a problem.
Construction
• Bodies fabricated from 14 or 12
gauge carbon steel or G-90 grade
galvanized steel. Covers fabricated
• Seams are continuously welded
and ground smooth
• Cover contains closed cell oil
resistant neoprene gasket
• Enclosure comes with stainless
steel cover screws which thread
into sealed wells to prevent liquid,
dust, etc., from entering into the
box through the screw holes
• Ground stud located in door
from 14, 12, or G-90 grade
galvanized steel
WA-GSC SERIES SCREW COVER ENCLOSURES
CATALOG NUMBER
PAINTED GALVANZIED
WA060604GSC WA060604GSCG 14/14 6.00x6.00x4.00 (152x152x102)
WA060606GSC WA060606GSCG 14/14 6.00x6.00x6.00 (152x152x152)
WA060804GSC WA060804GSCG 14/14 6.00x8.00x4.00 (152x203x102)
WA060806GSC WA060806GSCG 14/14 6.00x8.00x6.00 (152x203x152)
WA080804GSC WA080804GSCG 14/14 8.00x8.00x4.00 (203x203x102)
WA080806GSC WA080806GSCG 14/14 8.00x8.00x6.00 (203x203x152)
WA081004GSC WA081004GSCG 14/14 8.00x10.00x4.00 (203x254x102)
WA101004GSC WA101004GSCG 14/14 10.00x10.00x4.00 (254x254x102)
WA101006GSC WA101006GSCG 14/14 10.00x10.00x6.00 (254x254x152)
WA101206GSC WA101206GSCG 14/14 10.00x12.00x6.00 (254x305x152)
WA121204GSC WA121204GSCG 14/14 12.00x12.00x4.00 (305x305x102)
WA121206GSC WA121206GSCG 14/14 12.00x12.00x6.00 (305x305x152)
WA121606GSC WA121606GSCG 14/14 12.00x16.00x6.00 (305x406x152)
WA121608GSC WA121608GSCG 14/14 12.00x16.00x8.00 (305x406x203)
WA161606GSC WA161606GSCG 14/14 16.00x16.00x6.00 (406x406x152)
WA161608GSC WA161608GSCG 14/14 16.00x16.00x8.00 (406x406x203)
WA181806GSC WA181806GSCG 14/14 18.00x18.00x6.00 (457x457x152)
WA202008GSC WA202008GSCG 14/14 20.00x20.00x8.00 (508x508x203)
WA202408GSC WA202408GSCG 14/14 20.00x24.00x8.00 (508x610x203)
WA242408GSC WA242408GSCG 14/14 24.00x24.00x8.00 (610x610x203)
WA303012GSC WA303012GSCG 12/12 30.00x30.00x12.00 (762x762x305)
WA363612GSC WA363612GSCG 12/12 36.00x36.00x12.00 (914x914x305)
BODY/DOOR ENCLOSURE SIZE
STEEL GAUGE H X W X D
• Galvanized box welded corners
protected by zinc-rich coating
• No holes, knockouts, or rear
mounting holes
Finish
• ANSI-61 gray polyester powder
inside and out, or unpainted pregalvanized steel
Acces sorie s
• See pages J1-J22
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
WA - GSC SERIES ENCLOSURES
NEMA 3 & 4 SCREW COVER MOISTURE PROOF
CLOSED CELL GASKET
PROVIDED
D7
0.69
TYP
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
D8
N412 - C ULTIMATE SERIES ENCLOSURES
NEMA 4 & 12 SINGLE DOOR WALL-MOUNT
Industry Standards
UL 508, Types 4, 12 & 13
CSA Certified, Types 4, 12 & 13
NEMA/EEMAC Type 4, 12 & 13
Wall mounting brackets required to
maintain UL / CSA external mounting
requirements
UL Files E64791
N412161206C
FEATURES-SPECIFICATIONS
Applications
• Doors are interchangeable and eas-
Hubbell Wiegmann N412C ULTIMATE
Series Enclosures are designed to
house and protect electrical and
electronic components from harsh,
dirty environments. For use in installations where dirt, dust, oil, water, or
other contaminants are present.
• Grounding provisions provided
• 1/4-turn semi-flush oil tight latches are
• Print pocket is provided
• Doors are sealed with poured-inStreamlined styling, flush latching, and
attractive durable finish complement
any high tech electronic equipment.
• Mounting holes in rear of enclosure
• Studs for mounting optional back
Construction
• Bodies and doors fabricated from
14 gauge steel
• Continuously Plasma welded seams
• Increased tub opening for better access
Finish
• ANSI 61 gray polyester powder
• Concealed hinges
N412C ULTIMATE SERIES SINGLE DOOR ENCLOSURES
CATA L O G
NUMBER
N412121206C
N412161206C
N412161606C
N412162006C
N412201606C
N412202006C
N412241606C
N412242006C
N412242406C
N412161208C
N412161608C
N412162008C
N412201608C
N412241608C
N412202008C
N412242008C
N412302008C
N412202408C
*Back panels must be ordered
separately.
BODY/DOOR
STEEL GAUGE
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
ENCLOSURE SIZE
HXWXD
12.00x12.00x6.00 (305x305x152)
16.00x12.00x6.00 (406x305x152)
16.00x16.00x6.00 (406x406x152)
16.00x20.00x6.00 (406x508x152)
20.00x16.00x6.00 (508x406x152)
20.00x20.00x6.00 (508x508x152)
24.00x16.00x6.00 (610x406x152)
24.00x20.00x6.00 (610x508x152)
24.00x24.00x6.00 (610x610x152)
16.00x12.00x8.00 (406x305x203)
16.00x16.00x8.00 (406x406x203)
16.00x20.00x8.00 (406x508x203)
20.00x16.00x8.00 (508x406x203)
24.00x16.00x8.00 (610x406x203)
20.00x20.00x8.00 (508x508x203)
24.00x20.00x8.00 (610x508x203)
30.00x20.00x8.00 (762x508x203)
20.00x24.00x8.00 (508x610x203)
***An optional RAL7035 Textured light-gray polyester powder finish is available, but is
made to order only. (Consult Factory) An“LG” is all that is needed to order product.
ily removable
supplied to hold door securely closed
place polyurethane gasket**
panel (the Ultimate back panels
have increased in size to accommodate larger foot-print installations)
inside and out
BACK PANEL
CATALOG NUMBER*
WHITE “G”
NP1212C
NP1612C
NP1616C
NP2016C
NP2016C
NP2020C
NP2416C
NP2420C
NP2424C
NP1612C
NP1616C
NP2016C
NP2016C
NP2416C
NP2020C
NP2420C
NP3020C
NP2420C
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NP1212CG
NP1612CG
NP1616CG
NP2016CG
NP2016CG
NP2020CG
NP2416CG
NP2420CG
NP2424CG
NP1612CG
NP1616CG
NP2016CG
NP2016CG
NP2416CG
NP2020CG
NP2420CG
NP3020CG
NP2420CG
BACK PANEL
SIZEA&B
10.2x10.2 (259x259)
14.2x10.2 (361x259)
14.2x14.2 (361x361)
14.2x18.2 (361x462)
18.2x14.2 (462x361)
18.2x18.2 (462x462)
22.2x14.2 (564x361)
22.2x18.2 (564x462)
22.2x22.2 (564x564)
14.2x10.2 (361x259)
14.2x14.2 (361x361)
14.2x18.2 (361x462)
18.2x14.2 (462x361)
22.2x14.2 (564x361)
18.2x18.2 (462x462)
22.2x18.2 (564x462)
28.2x18.2 (716x462)
18.2x22.2 (462x564)
CSA File LL66078
• An optional RAL7035 textured lightgray polyester powder finish is
available, but is made to order only.
(Consult Factory) An “LG” is all that
is needed to order product.***
•
Optional back panels are white
polyester powder
• Optional “G” panels have a con-
ductive finish (See page I5)
Acces sorie s
• Back panels (see reference tables)
• Window door (see reference tables)
• See pages J1-J22. See pages J20J22 for ULTIMATE Series Accessories
• Optional N412MFK mounting foot kit
must be ordered separately
CE
6.00 (152)
8.00 (203)
8.00 (203)
8.00 (203)
10.00 (254)
10.00 (254)
12.00 (305)
12.00 (305)
4.00 (102)
8.00 (203)
8.00 (203)
8.00 (203)
10.00 (254)
12.00 (305)
10.00 (254)
12.00 (305)
4.00 (102)
10.00 (254)
Continued on page D9
—
—
—
—
—
—
—
—
16.00 (406)
—
—
—
—
—
—
—
22.00 (559)
—
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
N412 - C ULTIMATE SERIES ENCLOSURES
NEMA 4 & 12 SINGLE DOOR WALL-MOUNT
N412C ULTIMATE SERIES SINGLE DOOR ENCLOSURES (CONT.)
CATA L O G
NUMBER
N412242408C
N412302408C
N412362408C
N412243008C
N412303008C
N412363008C
N412363608C
N412161210C
N412161610C
N412162010C
N412201610C
N412202010C
N412202410C
N412241610C
N412242010C
N412242410C
N412243010C
N412302010C
N412302410C
N412303010C
N412362410C
N412363010C
N412363610C
N412423610C
N412482410C
N412483610C
N412603610C
N412202012C
N412242012C
N412242412C
N412302412C
N412303012C
N412362412C
N412402412C
N412363012C
N412363612C
N412423612C
N412482412C**
N412483612C**
N412603612C**
N412242416C**
N412363016C**
N412483616C**
N412242420C**
N412302420C**
N412363020C**
*Back panels must be ordered separately. **Enclosures are supplied with closed cell neoprene gasket (not foam-in-place).
***An optional RAL7035 Textured light-gray polyester powder finish is available, but is made to order only.(Consult Factory)
An “LG” is all that is needed to order product.
BODY/DOOR
STEEL
GAUGE
14/14
14/14
14/14
14/14
14/14
4/14
1
14/14
4/14
1
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
14/14
ENCLOSURE SIZE
HXWXD
24.00x24.00x8.00 (610x610x203)
30.00x24.00x8.00 (762x610x203)
36.00x24.00x8.00 (914x610x203)
24.00x30.00x8.00 (610x762x203)
30.00x30.00x8.00 (762x762x203)
36.00x30.00x8.00 (914x762x203)
36.00x36.00x8.00 (914x914x203)
16.00x12.00x10.00 (406x305x254)
16.00x16.00x10.00 (406x406x254)
16.00x20.00x10.00 (406x508x254)
20.00x16.00x10.00 (508x406x254)
20.00x20.00x10.00 (508x508x254)
20.00x24.00x10.00 (508x610x254)
24.00x16.00x10.00 (610x406x254)
24.00x20.00x10.00 (610x508x254)
24.00x24.00x10.00 (610x610x254)
24.00x30.00x10.00 (610x762x254)
30.00x20.00x10.00 (762x508x254)
30.00x24.00x10.00 (762x610x254)
30.00x30.00x10.00 (762x762x254)
36.00x24.00x10.00 (914x610x254)
36.00x30.00x10.00 (914x762x254))
36.00x36.00x10.00 (914x914x254)
42.00x36.00x10.00 (1067x914x254)
48.00x24.00x10.00 (1219x610x254)
48.00x36.00x10.00 (1219x914x254)
60.00x36.00x10.00 (1524x914x254)
20.00x20.00x12.00 (508x508x305)
24.00x20.00x12.00 (610x508x305)
24.00x24.00x12.00 (610x610x305)
30.00x24.00x12.00 (762x610x305)
30.00x30.00x12.00 (762x762x305)
36.00x24.00x12.00 (914x610x305)
40.00x24.00x12.00 (1016x610x305)
36.00x30.00x12.00 (914x762x305)
36.00x36.00x12.00 (914x914x305)
42.00x36.00x12.00 (1067x914x305)
48.00x24.00x12.00 (1219x610x305)
48.00x36.00x12.00 (1219x914x305)
60.00x36.00x12.00 (1524x914x305)
24.00x24.00x16.00 (610x610x406)
36.00x30.00x16.00 (914x762x406)
48.00x36.00x16.00 (1219x914x406)
24.00x24.00x20.00 (610x610x508)
30.00x24.00x20.00 (762x610x508)
36.00x30.00x20.00 (914x762x508)
BACK PANEL
CATALOG NUMBER*
WHITE “G”
NP2424C
NP3024C
NP3624C
NP2430C
NP3030C
NP3630C
NP3636C
NP1612C
NP1616C
NP1620C
NP2016C
NP2020C
NP2024C
NP2416C
NP2420C
NP2424C
NP2430C
NP3020C
NP3024C
NP3030C
NP3624C
NP3630C
NP3636C
NP4236C
NP4824C
NP4836C
NP6036C
NP2020C
NP2420C
NP2424C
NP3024C
NP3030C
NP3624C
NP4024C
NP3630C
NP3636C
NP4236C
NP4824C
NP4836C
NP6036C
NP2424C
NP3630C
NP4836C
NP2424C
NP3024C
NP3630C
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
X
X
X
X
X
X
NP2424CG
P3024CG
N
NP3624CG
NP2430CG
NP3030CG
NP3630CG
NP3636CG
NP1612CG
NP1616CG
NP1620CG
NP2016CG
NP2020CG
NP2024CG
NP2416CG
NP2420CG
NP2424CG
NP2430CG
NP3020CG
NP3024CG
NP3030CG
NP3624CG
NP3630CG
NP3636CG
NP4236CG
NP4824CG
NP4836CG
NP6036CG
NP2020CG
NP2420CG
NP2424CG
NP3024CG
NP3030CG
NP3624CG
NP4024CG
NP3630CG
NP3636CG
NP4236CG
NP4824CG
NP4836CG
NP6036CG
NP2424CG
NP3630CG
NP4836CG
NP2424CG
NP3024CG
NP3630CG
BACK PANEL
SIZEA&B
22.2x22.2 (564x564)
28.2x22.2 (716x564)
34.2x22.2 (869x564)
22.2x28.2 (564x716)
28.2x28.2 (716x716)
34.2x28.2 (869x716)
34.2x34.2 (869x869)
14.2x10.2 (361x259)
14.2x14.2 (361x361)
14.2x18.2 (361x462)
18.2x14.2 (462x361)
18.2x18.2 (462x462)
18.2x22.2 (462x564)
22.2x14.2 (564x361)
22.2x18.2 (564x462)
22.2x22.2 (564x564)
22.2x28.2 (564x716)
28.2x18.2 (716x462)
28.2x22.2 (716x564)
28.2x28.2 (716x716)
34.2x22.2 (869x564)
34.2x28.2 (869x716)
34.2x34.2 (869x869)
40.2x34.2 (1021x869)
46.2x22.2 (1173x564)
46.2x34.2 (1173x869)
58.2x34.2 (1478x869)
18.2x18.2 (462x462)
22.2x18.2 (564x462)
22.2x22.2 (564x564)
28.2x22.2 (716x564)
28.2x28.2 (716x716)
34.2x22.2 (869x564)
38.2x22.2 (970x564)
34.2x28.2 (869x716)
34.2x34.2 (869x869)
40.2x34.2 (1021x869)
46.2x22.2 (1173x564)
46.2x34.2 (1173x869)
58.2x34.2 (1478x869)
22.2x22.2 (564x564)
34.2x28.2 (869x716)
46.2x34.2 (1173x869)
22.2x22.2 (564x564)
28.2x22.2 (716x564)
34.2x28.2 (869x716)
10.00 (255)
1
10.00 (255)
12.00 (306)
12.00 (306)
21.00 (533)
24.00 (610)
24.00 (610)
30.00 (765)
10.00 (254)
12.00 (305)
20.00 (508)
21.00 (533)
24.00 (610)
24.00 (610)
30.00 (762)
24.00 (610)
D9
CE
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
8.00 (204)
8.00 (204)
8.00 (204)
0.00 (255)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
16.00 (406)
22.00 (559)
28.00 (711)
16.00 (406)
22.00 (559
28.00 (711)
28.00 (711)
—
—
—
—
—
—
—
—
16.00 (406)
16.00 (406)
22.00 (559)
28.00 (711)
22.00 (559)
28.00 (711)
28.00 (711)
28.00 (711)
—
—
—
—
16.00 (406)
—
16.00 (406)
22.00 (559
—
28.00 (711)
—
28.00 (711)
28.00 (711)
—
—
16.00 (406)
28.00 (711)
—
16.00 (406)
22.00 (559)
16.00 (406)
16.00 (406)
28.00 (711)
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
Loading...