Wiegmann WA-FSSS SERIES ENCLOSURES, WA-FSDSS SERIES ENCLOSURES Catalog Page

DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-FSSS & WA-FSDSS SERIES ENCLOSURES NEMA 12 STAINLESS FREESTANDING
E28
FEATURES-SPECIFICATIONS
Applications
Designed to protect electrical and electronic controls, components, and instruments in typical industrial environ­ments. Enclosures protect enclosure equipment from dust, dirt, oil, and dripping water. These enclosures are used in machine tool applications for housing motor starters, drives, contactors, PLC’s, as well as a wide variety of other electrical and electronic equipment. The addition of 19-inch rack mounting accessories make these enclosures ideal for providing rugged protection for sensitive rack mounted components in harsh industrial environ­ments. The enclosures are found extensively in automotive, pulp and paper, wood products, textile, and similar industries.
Two styles are available to provide maximum flexibility:
a) Single Door Single Access
(single door on front)
b) Two Door Single Access
(two door on front)
Industry Standards
UL 508, Type 12 CSA Certified, Type 12 NEMA/EEMAC Type 12
UL Files E64791
CSA File LL66078
Construction
• Fabricated from 12 or 10 gauge steel 304 stainless steel
• Continuously welded seams ground smooth, less holes or knockouts
• Body stiffeners for added rigidity
• Heavy duty lifting eyes for easy handling
• Heavy gauge continuous hinges support each door
• 3 point latching mechanism with an oil-tight key locking handle is provided
• Print pocket is provided
• “Uni-strut” mounting channels are welded horizontally to interior body sides and top, bottom and center to allow optional back panels to be positioned in enclosure. Optional swing, half, full and rack panels can be mounted anywhere along unistrut channel
• Doors are sealed with closed cell neoprene gasket
• Stiffeners are welded to back of two door enclosures to maintain flatness and increase rigidity
• Grounding provisions provided
Finish
• Enclosures are unpainted. All exter­nal surfaces have smooth brushed finish
Optional back panels are white polyester powder over phosphatized surfaces
Accessories
• Sub panels (see pages C29-C31, I6-I12)
• Accessories (see pages J1-J19)
WA604818FSDSS
®
R
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-FSSS & WA-FSDSS SERIES ENCLOSURES
NEMA 12 STAINLESS FREESTANDING
E29
CATALOG NUMBER
BODY/DOOR ENCLOSURE SIZE STEEL GAUGE W X H X D
AF
WA602418FSSS6 12/12 60.12x24.12x18.12 (1527x613x460) 23.13 (587) 32.06 (814)
WA722418FSSS6 12/12 72.12x24.12x18.12 (1832x613x460) 29.13 (740) 38.06 (967)
WA723018FSSS6 12/12 72.12x30.12x18.12 (1832x765x460) 29.13 (740) 38.06 (967)
WA723618FSSS6 12/12 72.12x36.12x18.12 (1832x917x460) 29.13 (740) 38.06 (967)
WA902420FSSS6 10/10 90.12x24.12x20.12 (2289x613x511) 38.13 (968) 47.06 (1195)
WA903620FSSS6 10/10 90.12x36.12x20.12 (2289x917x511) 38.13 (968) 47.06 (1195)
WA603624FSSS6 12/12 60.12x36.12x24.12 (1527x917x613) 23.13 (587) 32.06 (814)
WA722424FSSS6 12/12 72.12x24.12x24.12 (1832x613x613) 29.13 (740) 38.06 (967)
WA723024FSSS6 12/12 72.12x30.12x24.12 (1832x765x613) 29.13 (740) 38.06 (967)
WA723624FSSS6 12/12 72.12x36.12x24.12 (1832x917x613) 29.13 (740) 38.06 (967)
WA903624FSSS6 10/10 90.12x36.12x24.12 (2289x917x613) 38.13 (968) 47.06 (1195)
WA723630FSSS6 12/12 72.12x36.12x30.12 (1832x917x765) 29.13 (740) 38.06 (967)
WA723636FSSS6 12/12 72.12x36.12x36.12 (1832x917x917) 29.13 (740) 38.06 (967)
WA903636FSSS6 10/10 90.12x36.12x36.12 (2289x917x917) 38.13 (968) 47.06 (1195)
WA-FSSS SERIES SINGLE DOOR FREESTANDING ENCLOSURES
CATALOG BODY/DOOR ENCLOSURE SIZE
ABCE
NUMBER STEEL GAUGE H X W X D
WA604818FSDSS6 10/10 60.12x48.12x18.12 (1527x1222x460) 23.13 (587) 19.88 (505) 20.03 (509 32.06 (814)
WA724818FSDSS6 10/10 72.12x48.12x18.12 (1832x1222x460) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA726018FSDSS6 10/10 72.12x60.12x18.12 (1832x1527x460) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA727218FSDSS6 10/10 72.12x72.12x18.12 (1832x1832x460) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA904820FSDSS6 10/10 90.12x48.12x20.12 (2289x1222x511) 38.13 (968) 29.88 (759) 30.03 (763) 47.06 (1195)
WA907220FSDSS6 10/10 90.12x72.12x20.12 (2289x1832x511) 38.13 (968) 29.88 (759) 30.03 (763) 47.06 (1195)
WA724824FSDSS6 10/10 72.12x48.12x24.12 (1832x1222x613) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA726024FSDSS6 10/10 72.12x60.12x24.12 (1832x1527x613) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA727224FSDSS6 10/10 72.12x72.12x24.12 (1832x1832x613) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA907224FSDSS6 10/10 90.12x72.12x24.12 (2289x1832x613) 38.13 (968) 29.88 (759) 30.03 (763) 47.06 (1195)
WA726036FSDSS6 10/10 72.12x60.12x36.12 (1832x1527x917) 29.13 (740) 23.88 (607) 24.03 (610) 38.06 (967)
WA907236FSDSS6 10/10 90.12x72.12x36.12 (2289x1832x917) 38.13 (968) 29.88 (759) 30.03 (763) 47.06 (1195)
WA-FSDSS SERIES TWO DOOR FREESTANDING ENCLOSURES
6 NEW PRODUCT IN 2003
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-FSSS & WA-FSDSS SERIES ENCLOSURES NEMA 12 STAINLESS FREESTANDING
E30
H - 9.88
W - 1.69
CHANNEL
MOUNTING
SECTION Y-Y
A
A
8.09
1.00 TYP
W - 2.25
1.62
D
1.16
Y
F
3.75
1.81
AVAILABLE
CLEAR SPACE
2.38
H
7.38
1.38
1.38
W - 2.75
OPENING
6.94
1.75
1.75
H - 10.75
OPENING
3.38
W
0.81
1.75
4.03
Y
WA-FSSS
WA-FSSS & WA-FSDSS SERIES ENCLOSURES
NEMA 12 STAINLESS FREESTANDING
E31
DATA SUBJECT TO CHANGE WITHOUT NOTICE
MOUNTING CHANNEL
BODY STIFFENER
AVAILABLE
CLEAR SPACE
6.94
7.38
A
A
8.09
1.62
1.00 TYP
W - 2.25
2.00
0.25
C
B
0.63
SECTION Y-Y
C
Y
Y
D
1.16
E
3.75
1.81
1.75
2.38
W
W/2 - 0.75W/2 - 0.75
0.25
4.03
1.75
1.75
3.38
H - 10.75
OPENING
1.38
W - 2.75
OPENING
1.38
H
H - 9.88
1.75
WA-FSDSS
DATA SUBJECT TO CHANGE WITHOUT NOTICE
NPDD SERIES BACK PANELS ACCESSORY PANELS FOR DOUBLE DOOR FLOOR-MOUNT ENCLOSURES
I6
Description
• Steel panels are fabricated from 10 gauge carbon steel
• Panels are painted with a white polyester powder
• Panels are used in NEMA 12 double door floor-mounted enclosures and some 2-door wall-mount enclosures
FRONT VIEW
SIDE VIEW
PANEL
10 GA.
C
C
0.88 TYP
0.88 TYP
B
A
0.88
FLANGE
4 PL
0.563 Ø TYP
CATALOG NUMBER
PAINTED STEEL (WHITE)
NPDD4242 39.00x39.00 (991x991)
NPDD4260 38.00x56.00 (965x1422)
NPDD4842 45.00x39.00 (1143x991)
NPDD4848 44.00x44.00 (1118x1118)
NPDD5442 50.00x38.00 (1270x965)
NPDD6048 44.00x56.00 (1118x1422)
NPDD6060 56.00x56.00 (1422x1422)
NPDD7260 56.00x68.00 (1422x1727)
NPDD7272 68.00x68.00 (1727x1727)
BACK PANELS FOR DOUBLE DOOR FLOOR-MOUNTED ENCLOSURES
FEATURES-SPECIFICATIONS
NPDD4242
PANEL SIZE A X B
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-F1/F2 SERIES BACK PANELS
ACCESSORY PANELS FOR SINGLE DOOR FREESTANDING ENCLOSURES
I7
FEATURES-SPECIFICATIONS
Description
Panels for single-door single-access and single-door dual-access, freestanding NEMA 12, freestanding NEMA 4 and freestanding stainless steel enclosures.
• Panels are 10 or 12 gauge steel and can be positioned anywhere along horizontal depth-wise mounting channels
• Half-length panels can be located in the upper or lower portion of the enclosure
• Mounting hardware is furnished with each panel
• Panels are painted with a white polyester powder
• Panels may be used in two-door enclosures along with other free­standing accessories
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B PANEL TYPE
WA60P24F1 12 48.00x20.00 (1219x508) Full
WA60P24F2 12 24.88x20.00 (632x508) Half
WA72P24F1 12 60.00x20.00 (1524x508) Full
WA72P24F2 12 30.88x20.00 (784x508) Half
WA90P24F1 12 78.00x20.00 (1981x508) Full
WA90P24F2 12 39.88x20.00 (1013x508) Half
WA72P30F1 12 60.00x26.00 (1524x660) Full
WA72P30F2 12 30.88x26.00 (784x660) Half
WA60P36F1 12 48.00x32.00 (1219x813) Full
WA60P36F2 12 24.88x32.00 (632x813) Half
WA72P36F1 12 60.00x32.00 (1524x813) Full
WA72P36F2 12 30.88x32.00 (784x813) Half
WA90P36F1 12 78.00x32.00 (1981x813) Full
WA90P36F2 12 39.88x32.00 (1013x813) Half
BACK PANELS FOR SINGLE DOOR FREESTANDING ENCLOSURES
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Enclosure Side Removed
Full Panel
Panel Support
Half Panel
Unistrut
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered. NOTE: Suffix F1 = Full Panel, and F2 = Half Panel.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-F1/F2 SERIES BACK PANELS ACCESSORY PANELS FOR TWO DOOR FREESTANDING ENCLOSURES
I8
FEATURES-SPECIFICATIONS
Description
Panels for two-door single-access and two-door dual-access Free-standing NEMA 12 enclosures.
• Panels are 10 gauge steel and can be positioned anywhere along horizontal depth-wise mounting channels
• Half-length panels can be located in the upper or lower portion of the enclosure
• Mounting hardware is furnished with each panel
• Panels are painted with a white polyester powder
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B PANEL TYPE
WA60P48F1 10 48.00x44.00 (1219x1118) Full
WA60P48F2 10 24.88x44.00 (632x1118) Half
WA72P48F1 10 60.00x44.00 (1524x1118) Full
WA72P48F2 10 30.88x44.00 (784x1118) Half
WA72P60F1 10 60.00x56.00 (1524x1422) Full
WA72P60F2 10 30.88x56.00 (784x1422) Half
WA72P72F1 10 60.00x68.00 (1524x1727) Full
WA72P72F2 10 30.88x68.00 (784x1727) Half
WA90P48F1 10 78.00x44.00 (1981x1118) Full
WA90P48F2 10 39.88x44.00 (1013x1118) Half
WA90P72F1 10 78.00x68.00 (1981x1727) Full
WA90P72F2 10 39.88x68.00 (1013x1727) Half
BACK PANELS FOR TWO DOOR FREESTANDING ENCLOSURES
Typical Freestanding Two Door Enclosure (Dual Access Shown)
Side Removed For Clarity
Center Panel Support
Full Panel
Panel Support
Half Panel
NOTE: Center Panel support is supplied with a regular Two Door Enclosure Panel. This support is used only as a brace. It is not intended to be used as a support for Single Door Panels, relay racks, etc. NOTE: Suffix F1 = Full Panel, and F2 = Half Panel.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WASP-F3/F4 SERIES BACK PANELS
ACCESSORY SWING-OUT PANELS FOR FREESTANDING ENCLOSURES
I9
FEATURES-SPECIFICATIONS
Description
Panels for Free Standing NEMA 12 Enclosures and Free Standing NEMA 4 Enclosures.
• Full-length and half-length swing-out panels are available
• Half-length panels can be located in the upper or lower portion of the enclosures
• Mounting can be on either side of the enclosure
• Mounting hardware is furnished with each panel
• Panels are fabricated from 12 gauge steel
• Panels may be used in two-door enclosures along with other free-standing accessories
• Panels are painted with a white polyester powder
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B PANEL TYPE
WA60SP24F3 12 48.00x19.00 (1219x483) Full
WA60SP24F4 12 24.88x19.00 (632x483) Half
WA72SP24F3 12 60.00x19.00 (1524x483) Full
WA72SP24F4 12 30.88x19.00 (784x483) Half
WA72SP30F3 12 60.00x25.00 (1524x635) Full
WA72SP30F4 12 30.88x25.00 (784x635) Half
WA60SP36F3 12 48.00x31.00 (1219x787) Full
WA60SP36F4 12 24.88x31.00 (632x787) Half
WA72SP36F3 12 60.00x31.00 (1524x787) Full
WA72SP36F4 12 30.88x31.00 (784x787) Half
WA90SP36F3 12 78.00x31.00 (1981x787) Full
WA90SP36F4 12 39.88x31.00 (1013x787) Half
SWING-OUT PANELS FOR FREESTANDING ENCLOSURES
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Panel Support
Swing-out Panel Full or Half (Half Shown)
Enclosure Side Removed
Unistrut
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered. NOTE: Suffix F3 = Full Panel, and F4 = Half Panel.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SMP SERIES BACK PANELS ACCESSORY SIDE-MOUNT PANELS FOR FREESTANDING ENCLOSURES
I10
FEATURES-SPECIFICATIONS
Description
Panels for Freestanding NEMA 12 and Freestanding NEMA 4 Enclosures.
• Panels are fabricated from 12 gauge steel
• They provide extra mounting space on the sides of the enclosures
• Panels attach securely to mounting channels
• Panel mounting hardware is included
• Panels are painted with a white polyester powder
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SMP14 12 48.00x14.00 (1219x356)
WA72SMP14 12 60.00x14.00 (1524x356)
WA72SMP20 12 60.00x20.00 (1524x508)
WA90SMP14 12 78.00x14.00 (1981x356)
WA90SMP20 12 78.00x20.00 (1981x508)
SIDE-MOUNT PANELS FOR FREESTANDING ENCLOSURES
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Side Panel Full or Half
Unistrut
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SOF SERIES SWING-OUT RACKS
ACCESSORY SWING-OUT RACKS FOR FREESTANDING ENCLOSURES
I11
FEATURES-SPECIFICATIONS
Description
• Fabricated from 10 gauge steel, these swing-out rack mounting frames are available for mounting rack mounting equipment. Mounting holes are tapped with #10-32 threads spaced per E.I.A. standard
• Panels are painted with a white polyester powder
CATALOG NUMBER
FITS ENCLOSURE
RACK SIZE
USABLE ANGLE
H X W LENGTH “T”
WA7230S0F19 72.00x30.00 (1829x762) 19.00 (483) 57.88 (1470)
WA7236S0F19 72.00x36.00 (1829x914) 19.00 (483) 57.88 (1470)
WA9036S0F19 90.00x36.00 (2286x914) 19.00 (483) 75.38 (1915)
SWING-OUT RACKS FOR FREESTANDING ENCLOSURES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
Quick Release Latches Provided
T Usable Length
Frame Can Be Positioned Anywhere Front to Back
Enclosure Side Removed For Clarity
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Hole Detail
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SOF SERIES RACK ANGLES ACCESSORY RACK COMPONENTS FOR FREESTANDING ENCLOSURES
I12
FEATURES-SPECIFICATIONS
Type RP
For Free Standing NEMA 12 Enclosures
• Fabricated from 10 gauge steel
• Full-length or half-length rack mounting angles are available for mounting rack-mounted equipment
• If used in Two-Door Enclosures
a center panel support must be ordered
• Finish is a white polyester powder
Type RA
For all Free Standing NEMA 12 and NEMA 4 Enclosures
• Designed for mounting 19 inch and 24 inch rack mounted equipment
• Through holes (7/32 Dia.) are provided and require a W1032N clip nut (must be ordered separately)
• Rack angles are mounted on unistrut within the Free Standing enclosures and are adjustable
• If used in Two-Door Enclosures
a center panel support must be ordered
• Finish is a white polyester powder
CATALOG NUMBER STEEL GAUGE LENGTH “L”
WA60RP24F5 10 49.00 (1245)
WA60RP24F6 10 26.25 (667)
WA72RP24F5 10 61.25 (1556)
WA72RP24F6 10 31.50 (800)
WA72RP30F5 10 61.25 (1556)
WA72RP30F6 10 31.50 (800)
WA90RP24F5 10 78.75 (2000)
WA90RP24F6 10 40.25 (1022)
RELAY RACK ANGLES
CATALOG NUMBER FITS ENCLOSURE H X W RACK SIZE ANGLE LENGTH “L”
WA60RA19TH 60.00x24.00 (1524x610) 19.00 (483) 49.00 (1245)
WA72RA19TH 72.00x24.00 (1829x610) 19.00 (483) 61.25 (1556)
WA72RA24TH 72.00x30.00 (1829x762) 24.00 (610) 61.25 (1556)
WA90RA19TH 90.00x24.00 (2286x610) 19.00 (483) 78.78 (2001)
WA-RA RELAY RACK ANGLES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
Standard E.I.A. Spacing
Standard E.I.A. Spacing
D & T 10- 32
Loading...