DATA SUBJECT TO CHANGE WITHOUT NOTICE
N4S-FSSS & N4S-FSSSA SERIES ENCLOSURES
NEMA 4X SINGLE DOOR FREESTANDING
E26
FEATURES-SPECIFICATIONS
Applications
Designed to house electrical and
electronic controls, terminals, and
instruments in areas that are regularly
hosed down or are otherwise very wet.
Also suitable for outdoor applications.
Construction
• Bodies and doors fabricated from
12 gauge 304 and 316 stainless steel
• Continuously welded seams ground
smooth, less knockouts or holes
• “Uni-strut” mounting channels are
welded horizontally to interior body
sides, top, bottom and center
• Optional swing, half, full and rack
panels can be mounted anywhere
along “uni-strut” channel
Industry Standards
UL 508, Types 3, 4, 4X & 12
CSA Certified, Type 3, 4, & 12
NEMA/EEMAC Types 3, 4, 4X & 12
UL File E64791
CSA File LL66078
• Rolled lip around three sides of door
and along top of enclosures opening
excludes liquids and contaminants
from entering
• Quick and easy to operate stainless
steel door clamps around three sides
of doors
• Heavy gauge continuous hinge with
stainless steel hinge pin
• Doors are removable by pulling
stainless steel continuous hinge pin
• Hasp and staple are provided for
padlocking
• Print pocket is provided
• Heavy duty removable lifting eyes
CATALOG NUMBER
BODY/DOOR ENCLOSURE SIZE
Y BACK PANELS*
304 S.S. 316 S.S.
STEEL GAUGE H X W X D
N4S722518FSSS N4S722518FSSSA 12/12
72.12x25.12x18.12 6.38
(1832x638x460) (162)
N4S723124FSSS N4S723124FSSSA 12/12
72.12x31.12x24.12 8.38
(1832x790x613) (213)
N4S723724FSSS N4S723724FSSSA 12/12
72.12x37.12x24.12 10.38
(1832x943x613) (264)
N4S-FSSS SERIES SINGLE DOOR ENCLOSURES
See pages
C29-C31 and
J6-J12 for
various panel
styles
*Back panels must be ordered separately.
• Doors are sealed with closed cell
neoprene gasket
• Grounding provisions provided
Finish
• Standard grain finish
• Optional back panels are white
polyester powder over phosphatized
surfaces
Accessories
• Back panels (reference tables)
• See pages J1-J19
®
R
N4S-FSSS & N4S-FSSSA SERIES ENCLOSURES
NEMA 4X SINGLE DOOR FREESTANDING
E27
DATA SUBJECT TO CHANGE WITHOUT NOTICE
5.38
9.38
Y
2.00
15.00
MAX.
PADLOCK
HASP &
STAPLE
X
GASKETING
CLOSED CELL
HINGE
CONTINUOUS
NOT TO SCALE
SECTION X-X
D
H - 9.13
W - 2.44
CHANNEL
MOUNTING
SECTION Y-Y
1.00 W - 3.25
1.62
D
1.16
Y
H
7.38
2.38
1.38
W - 3.75
OPENING
6.75
H - 10.75
OPENING
3.38
W
0.81
X
Y
ENCLOSURES
FREESTANDING ACCESSORIES
C29
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60P24F1 12 48.00x20.00 (1219x508)
WA60P24F2 12 24.88x20.00 (632x508)
WA72P24F1 12 60.00x20.00 (1524x508)
WA72P24F2 12 30.88x20.00 (784x508)
WA90P24F1 12 78.00x20.00 (1981x508)
WA90P24F2 12 39.88x20.00 (1013x508)
WA72P30F1 12 60.00x26.00 (1524x660)
WA72P30F2 12 30.88x26.00 (784x660)
WA60P36F1 12 48.00x32.00 (1219x813)
WA60P36F2 12 24.88x32.00 (632x813)
WA72P36F1 12 60.00x32.00 (1524x813)
WA72P36F2 12 30.88x32.00 (784x813)
WA90P36F1 12 78.00x32.00 (1981x813)
WA90P36F2 12 39.88x32.00 (1013x813)
REGULAR PANELS ONLY (FULL & HALF) NEMA 12 SINGLE DOOR
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60P48F1 10 48.00x44.00 (1219x1118)
WA60P48F2 10 24.88x44.00 (632x1118)
WA72P48F1 10 60.00x44.00 (1524x1118)
WA72P48F2 10 30.88x44.00 (784x1118)
WA72P60F1 10 60.00x56.00 (1524x1422)
WA72P60F2 10 30.88x56.00 (784x1422)
WA72P72F1 10 60.00x68.00 (1524x1727)
WA72P72F2 10 30.88x68.00 (784x1727)
WA90P48F1 10 78.00x44.00 (1981x1118)
WA90P48F2 10 39.88x44.00 (1013x1118)
WA90P72F1 10 78.00x68.00 (1981x1727)
WA90P72F2 10 39.88x68.00 (1013x1727)
REGULAR PANELS ONLY (FULL & HALF) NEMA 12 TWO DOOR
NOTE: Center Panel support is supplied with a regular Two Door Enclosure
Panel. This support is used only as a brace. It is not intended to be used
as a support for Single Door Panels, relay racks, etc.
FULL PANEL
HALF PANEL
CENTER PANEL
SUPPORT
FULL PANEL
HALF PANEL
DATA SUBJECT TO CHANGE WITHOUT NOTICE
ENCLOSURES
FREESTANDING ACCESSORIES
C30
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SP24F3 12 48.00x19.00 (1219x483)
WA60SP24F4 12 24.88x19.00 (632x483)
WA72SP24F3 12 60.00x19.00 (1524x483)
WA72SP24F4 12 30.88x19.00 (784x483)
WA72SP30F3 12 60.00x25.00 (1524x635)
WA72SP30F4 12 30.88x25.00 (784x635)
WA60SP36F3 12 48.00x31.00 (1219x787)
WA60SP36F4 12 24.88x31.00 (632x787)
WA72SP36F3 12 60.00x31.00 (1524x787)
WA72SP36F4 12 30.88x31.00 (784x787)
WA90SP36F3 12 78.00x31.00 (1981x787)
WA90SP36F4 12 39.88x31.00 (1013x787)
SWING OUT PANELS ONLY (FULL & HALF) NEMA 12 SINGLE DOOR
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SMP14 12 48.00x14.00 (1219x356)
WA72SMP14 12 60.00x14.00 (1524x356)
WA72SMP20 12 60.00x20.00 (1524x508)
WA90SMP14 12 78.00x14.00 (1981x356)
WA90SMP20 12 78.00x20.00 (1981x508)
SIDE MOUNT PANELS FOR SINGLE OR DOUBLE DOORS
CATALOG NUMBER DESCRIPTION
WA60FSCPS Center panel support for 60" high enclosures
WA72FSCPS Center panel support for 72" high enclosures
WA90FSCPS Center panel support for 90" high enclosures
CENTER PANEL SUPPORTS
CATALOG NUMBER DESCRIPTION
WAPS1420CN Clamp nut for unistrut
WAPS3816CN Clamp nut for unistrut
WA1032N Clamp nuts for Type (RA) Relay Rack Angles
CLAMP NUTS
WA60SP24F3
WA60SMP14
DATA SUBJECT TO CHANGE WITHOUT NOTICE
ENCLOSURES
FREESTANDING ACCESSORIES
C31
CATALOG NUMBER STEEL GAUGE LENGTH “L”
WA60RP24F5 10 49.00 (1245)
WA60RP24F6 10 26.25 (667)
WA72RP24F5 10 61.25 (1556)
WA72RP24F6 10 31.50 (800)
WA72RP30F5 10 61.25 (1556)
WA72RP30F6 10 31.50 (800)
WA90RP24F5 10 78.75 (2000)
WA90RP24F6 10 40.25 (1022)
RELAY RACK ANGLES (FULL OR HALF) SINGLE DOOR
CATALOG FITS ENCLOSURE RACK ANGLE
NUMBER H X W SIZE LENGTH “L”
WA60RA19TH
60.00x24.00 19.00 49.00
(1524x610) (483) (1245)
WA72RA19TH
72.00x24.00 19.00 61.25
(1829x610) (483) (1556)
WA72RA24TH
72.00x30.00 24.00 61.25
(1829x762) (610) (1556)
WA90RA19TH
90.00x24.00 19.00 78.78
(2286x610) (483) (2001)
RELAY RACK ANGLES WITH THRU HOLES (TYPE RA)
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG FITS ENCLOSURE RACK ANGLE
NUMBER H X W SIZE LENGTH “T”
WA7230S0F19 72.00x30.00 19.00 57.88
(1829x762) (483) (1470)
WA7236S0F19 72.00x36.00 19.00 57.88
(1829x914) (483) (1470)
WA9036S0F19 90.00x36.00 19.00 75.38
(2286x914) (483) (1915)
SWING OUT RACK MOUNTING FRAMES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
WA60RP24F5 WA60RA19TH
WA7230SOF19
DATA SUBJECT TO CHANGE WITHOUT NOTICE
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
MOUNTING FEET • TOUCH-UP PAINT • HOL SQUARE
FEATURES-SPECIFICATIONS
J6
WAGSEMounting Feet WAWE
CATALOG NUMBER DESCRIPTION
WAGSE ANSI 61 gray satin enamel
WAWE White enamel
TOUCH-UP PAINT
CATALOG NUMBER DESCRIPTION
N412MFK For N412 steel enclosures
N412MFKSS
For N412 stainless steel
enclosures
MOUNTING FEET
MOUNTING FEET
• Mounting foot kit N412MFK contains
four steel external mounting feet
• Mounting foot kit N412MFKSS
contains four stainless steel external
mounting feet
• Sealing washers are provided with
each kit to maintain NEMA 4 or 12
rating after installation
• The N412MFK has a plated finish
TOUCH-UP PAINT
• Wiegmann touch-up paint is used to
repair existing finishes on enclosures
and panels
• Furnished in 12 oz. spray cans
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
ELECTRICAL INTERLOCKS • INTERLOCK DEFEATER • 3" GROUNDING
FEATURES-SPECIFICATIONS
J7
WAEK115 WADKDF WGNDKT
WAEK115NDH
CATALOG NUMBER DESCRIPTION VOLTS/HZ
WAEK115 Electrical interlock 120/60
WAEK115NDH Electrical interlock 120/60
ELECTRICAL INTERLOCKS
CATALOG NUMBER DESCRIPTION
WAEKDF Defeater
INTERLOCK DEFEATER
ELECTRICAL INTERLOCKS
The WAEK115 is designed to be used
with standard Wiegmann door latching
mechanisms. When turned on, this
interlock will prevent the door handle
from being turned to open the door.
This interlock is designed to fit handles
in the following enclosures:
• All two door NEMA 12 enclosures
• Free standing NEMA 12 enclosures
• All consoles
• All single door NEMA 12 enclosures
which have
3 pt handle mechanisms
• Two door NEMA 12 enclosures for
flange-mounted
disconnects
• Modular NEMA 12 enclosures
• Multi-door NEMA 12 enclosures
The WAEK115NDH is designed to be
used with standard Wiegmann enclosures that have no handles. This interlock requires drilling several holes in
the cover and the body for mounting.
GROUNDING KIT
• Field Grounding Kit
• Includes necessary parts to properly
ground enclosure
INTERLOCK DEFEATER
• This defeater is key operated and
enables personnel to enter an enclosure while the enclosures internal
components are energized. Turning
the key disengages the circuit to the
electrical interlock
CATALOG NUMBER DESCRIPTION
WGNDKT Grounding Kit
GROUNDING KIT
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
TERMINAL KIT ASSEMBLIES, BLOCKS AND STRIPS
J8
FEATURES-SPECIFICATIONS
TERMINAL KIT ASSEMBLIES,
BLOCKS AND STRIPS FOR
ALL SMALL JIC NEMA 12
AND JIC-NEMA 4 BOXES
• Provides a strong, versatile means for
mounting terminal blocks in Wiegmann
JIC boxes and other enclosures
• Easily installed bracket assembly
accommodates the desired number
of terminal straps or block strips
• Bracket assembly consists of two
white enamel brackets which mount
on weldnuts
• Terminal block strip (ordered separately)
is Buchanan Type MD for wire sizes
No.22 through 10, mounted on a
single terminal strap. Block strips
attach where desired by spring locking
CATALOG DIMENSION
KPN
NUMBER PARALLEL TO BRACKETS
WA0806JTMA 6.00 (152) 1.56 (40) 2.75 (70) 2.63 (67)
WA0808JTMA 8.00 (203) 1.56 (40) 2.75 (70) 4.63 (118)
WA1010JTMA 10.00 (254) 2.81 (71) 4.00 (102) 6.53 (166)
WA1212JTMA 12.00 (305) 2.81 (71) 4.00 (102) 8.53 (217)
WA1614JTMA 14.00 (356) 2.81 (71) 4.00 (102) 10.53 (267)
BRACKET ASSEMBLIES FOR SMALL JIC NEMA 12 AND JIC NEMA 4 ENCLOSURES
CATALOG DIMENSION TERMINAL BLOCKS
USABLE SPACE N
NUMBER PARALLEL TO STRIP PER STRIP #
WA08JB 8.00 (203) 8 4.63 (118)
WA10JB 10.00 (254) 12 6.53 (166)
WA12JB 12.00 (305) 16 8.53 (217)
WA14JB 14.00 (356) 20 10.53 (267)
WA16JB 16.00 (406) 24 12.53 (318)
TERMINAL BLOCK STRIP & STRAP
CATALOG ENCLOSURE DIMENSION
USABLE SPACE N
NUMBER PARALLEL TO STRAP
WA0806JS 8.00 (203) 4.63 (118)
WA0808JS 8.00 (203) 4.63 (118)
WA1008JS 10.00 (254) 6.63 (168)
WA1010JS 10.00 (254) 6.63 (168)
WA1210JS 12.00 (305) 8.63 (219)
WA1212JS 12.00 (305) 8.63 (219)
WA1412JS 14.00 (356) 10.63 (270)
WA1614JS 16.00 (406) 12.63 (321)
TERMINAL STRAPS
NOTE: Terminal blocks are not included. Be sure to order one bracket assembly plus the desired number
of terminal straps for each enclosure.
Terminal Kit Assembly for
Small JIC Enclosures (Series B & BN4)
nuts. Order brackets, terminal straps
and block strips by part number
shown below
How To Order
• Each enclosure requires one bracket
assembly plus the desired number of
terminal straps. The bracket assembly
and the terminal straps must be
ordered separately
• To select the correct terminal strap,
determine whether the terminal straps
will be mounted parallel to the height
or width dimension. Specify the
number of straps desired, checking
usable space for enclosure ordered
• To select the correct bracket assembly,
determine whether the bracket will
be mounted parallel to height or
width dimension of enclosure. Refer
to chart and specify correct bracket
by catalog number. One bracket is
needed for each row of collar studs
parallel to the brackets
Bracket
Section X-X
Terminal
Strap
Terminal
Block
Strip
WA0808JTMA
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
TERMINAL KIT ASSEMBLIES, BLOCKS AND STRIPS
J9
FEATURES-SPECIFICATIONS
TERMINAL KIT ASSEMBLIES
AND STRAPS FOR NEMA
TYPE 4, 12 AND 13
ENCLOSURES
• Provide strong, versatile and easilyinstalled terminal block mounting
supports
• For use on extra large NEMA Type 1,
4 or 12 and large JIC enclosures
• Each bracket assembly consists of
two or three brackets which mount
on enclosure collar studs
• Mounting straps can be positioned
anywhere along the brackets and are
held in place by spring locking nuts,
making wiring easy and providing
for the addition of more straps at
a later date
• Standard finish in white polyester
powder
• Brackets may be installed parallel
to height or width dimension. Each
enclosure requires one bracket
assembly and the desired number
of terminal straps
CATALOG NUMBER NUMBER OF BRACKETS BRACKET LENGTH FOR ENCLOSURE WIDTH
WA12NTMA2 2 9.00 (229) 12.00 (305)
WA16NTMA2 2 13.00 (330) 16.00 (406)
WA20NTMA2 2 17.00 (432) 20.00 (508)
WA24NTMA2 2 21.00 (533) 24.00 (610)
WA24NTMA3 3 21.00 (533) 24.00 (610)
BRACKET ASSEMBLIES FOR NEMA 4, 12, AND 13 ENCLOSURES – BRACKET ASSEMBLY
CATALOG NUMBER NUMBER OF STRAPS A B FOR ENCLOSURE WIDTH
WA12T 1 9.00 (229) 7.75 (197) 12.00 (305)
WA16T 1 13.00 (330) 11.75 (298) 16.00 (406)
WA20T 1 17.00 (432) 15.38 (391) 20.00 (508)
WA24T 1 21.00 (533) 19.75 (502) 24.00 (610)
WA30T 1 27.00 (686) 25.75 (654) 30.00 (762)
WA36T 1 33.00 (838) 31.75 (806) 36.00 (914)
WA42T 1 39.00 (991) 37.75 (959) 42.00 (1067)
WA48T 1 45.00 (1143) 43.75 (1111) 48.00 (1219)
TERMINAL STRAPS
Bracket
Terminal
Strap
Section Y-Y
WA16NTMA2
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
FLOOR STAND KIT
J10
FEATURES-SPECIFICATIONS
FLOOR STAND KIT
• Kits are easily installed on most
wall-mounted Wiegmann enclosures.
Kits can also be used to elevate
Wiegmann freestanding enclosures.
To install, drill holes in bottom of
existing enclosure and bolt in place.
Each kit includes two stands and
mounting bolts and nuts
• Steel floor stand has a ANSI 61
gray polyester powder finish over
phosphatized surfaces
• Stainless steel floor stand is type
304 stainless with a grained finish
CATALOG NUMBER
FLOOR STAND ENCLOSURE
STEEL STAINLESS STEEL
HEIGHT “H” SIZE “D”
FK0608 SSFK06086 6.00 (152) 8.00 (203)
FK0610 SSFK0610 6.00 (152) 10.00 (254)
FK0612 SSFK06126 6.00 (152) 12.00 (305)
FK0618 SSFK06186 6.00 (152) 18.00 (457)
FK06246 SSFK06246 6.00 (152) 24.00 (610)
FK1208 SSFK1208 12.00 (305) 8.00 (203)
FK1210 SSFK1210 12.00 (305) 10.00 (254)
FK1212 SSFK1212 12.00 (305) 12.00 (305)
FK1216 SSFK1216 12.00 (305) 16.00 (406)
FK1218 SSFK12186 12.00 (305) 18.00 (457)
FK1220 SSFK12206 12.00 (305) 20.00 (508)
FK12246 SSFK12246 12.00 (305) 24.00 (610)
FK1808 — 18.00 (457) 8.00 (203)
FK1810 — 18.00 (457) 10.00 (254)
FK1812 — 18.00 (457) 12.00 (305)
FK1816 — 18.00 (457) 16.00 (406)
FK2408 — 24.00 (610) 8.00 (203)
FK2410 SSFK2410 24.00 (610) 10.00 (254)
FK2412 SSFK2412 24.00 (610) 12.00 (305)
FLOOR STAND KIT
Section X-X
4.00
1.00
2.09
7.75
8.00
Ø 0.56
TYP
6.00
2.09
10 GA.
10 GA.
H
X
X
2.25
2.25
0.56
0.69
1.00 5.00
Ø 0.56
TYP
1.13
TYP
D
FK0608 SSFK1216
6 NEW PRODUCT IN 2003
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
CASTERS • PANEL SUPPORTS • STABILIZERS
J11
FEATURES-SPECIFICATIONS
CASTERS
• Casters can be used on any enclosure
to provide mobility
• Caster kit includes two swivel casters
and two stationary casters along with
all necessary mounting hardware
PANEL SUPPORTS
• Provide additional support for panels
on which heavy instruments are
mounted
• The panel supports are adjustable
so the weight of the panel is partially
supported by the bottom of the
enclosure
• White polyester powder finish
STABILIZERS
• Designed to prevent injury to workers
by stabilizing floor mounted enclosures
which are not bolted down against
tipping. Stabilizers slip under the
floor stands and are secured by
tightening bolts in washers
• ANSI 61 gray polyester finish
Casters Panel Supports Stabilizers
CATALOG
NUMBER
DESCRIPTION
WC10C
Set of 4 casters, 2 mounting
plates and hardware
WC12C
Set of 4 casters, 2 mounting
plates and hardware
CASTERS
CATALOG
NUMBER
DESCRIPTION
WAPS03
Two panel supports for 1-door and
2-door enclosures where distance
from bottom of panel to bottom of
enclosure is less then 2-1/4 inches
WAPS09
Two panel supports for free-standing
or multi-door enclosures where
distance from bottom of panel
to bottom of enclosure is between
2-7/8 inches and 8-1/2 inches
PANEL SUPPORTS
CATALOG
NUMBER
DESCRIPTION
WAENST Two stabilizers
STABILIZERS
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
ADAPTER PLATES • RELAY RACK ANGLE KIT
FEATURES-SPECIFICATIONS
J12
OPERATOR ADAPTER
PLATES
• Used on all Wiegmann disconnect
enclosures with universal flange
cutouts
• An operator adapter plate is required
to install a disconnect in all Wiegmann
enclosures with a universal cutout
on pages F31, F35, F36, F37, F38,
F39, F43, F44
• Operator adapters include an adapter
plate and additional parts used to
interlock the master door with the
disconnect operating mechanism.
Panel drilling and installation instructions are furnished with each adapter
• Each brand and type of disconnect
requires a different operator adapter.
It is important to select the proper
operator adapter and enclosure for
the disconnect that you have selected
BLANK ADAPTER
PLATES
• Used to cover flange cutouts in
disconnect enclosures when
disconnects are not installed. This
greatly increases the versatility of
the disconnect enclosures enabling
them to also be used as regular
Type 12 enclosures
• Wiegmann blank adapter plates are
made from heavy gauge steel, with
oil-resistant gasket to maintain the
dust-tight and oil-tight qualities of
the enclosure
• All blank adapter plates are painted
ANSI 61 gray polyester powder
• All necessary mounting hardware
and instructions are included
RELAY RACK ANGLE KIT
(FOR WALL MOUNTS)
• For NEMA 12, NEMA 4 and
NEMA 412 wall mount enclosures.
Designed for mounting 19 inch
rack mounted equipment in 24 inch
wide enclosures. Small holes are
pre-tapped at 10-32
• To install, drill holes in side of
enclosure and bolt angles in place
• Sealing washers are also provided
to maintain original NEMA rating
after installation
• Finish is white
CATALOG ANGLE
NUMBER LENGTH “L”
DESCRIPTION
WARAK24 23.63 (600) Two Angles
WARAK30 29.63 (753) Two Angles
WARAK36 35.63 (905) Two Angles
RELAY RACK ANGLE KIT
Standard E.I.A.
Spacing
D & T 10-32
WA21ABA WA22BAP WARAK24
CATALOG
TYPE OF OPERATOR ADAPTER
NUMBER
WA21ABA Allen-Bradley 1494F and 1494D
WA21ABVA Allen-Bradley 1494V
WA21CHVA Cutler-Hammer C361, C371 and
C371 Flex Shaft™
WA21CHVA ABB Controls
WA21GETDA General Electric STDA
WA21ITE I-T-E Max-Flex™
WA21SDA Square D Class 9422, (variable
depth and cable mechanism)
WA21WHA Cutler Hammer/Westinghouse SM
OPERATOR ADAPTER PLATES
CATALOG
TYPE OF OPERATOR ADAPTER
NUMBER
WA21BAP
Blank adapter for universal
cutouts on pages F31, F35, F36,
F37, F38, F39, F43, F44
WA22BAP
Blank adapter for enclosures
on page F17
WA3456BAP
Blank adapter for single door
wall-mount enclosures on
pages F3, F7, F21
BLANK ADAPTER PLATES
Loading...