DATA SUBJECT TO CHANGE WITHOUT NOTICE
N4S-FS SERIES ENCLOSURES
NEMA 4 SINGLE DOOR FREESTANDING
D16
FEATURES-SPECIFICATIONS
Applications
Designed to house electrical and
electronic controls, terminals, and
instruments in areas that are regularly
hosed down or are otherwise very wet.
Also suitable for outdoor applications.
Construction
• Bodies and doors fabricated from
12 gauge steel
• Continuously welded seams ground
smooth, less knockouts or holes
• “Uni-strut” mounting channels are
welded horizontally to interior body
sides, top, bottom and center
• Optional swing, half, full and rack
panels can be mounted anywhere
along “uni-strut” channel
Industry Standards
UL 508, Types 3, 4, & 12
CSA Certified, Type 3, 4, & 12
NEMA/EEMAC Types 3, 4, & 12
UL File E64791
CSA File LL66078
• Rolled lip around three sides of door
and along top of enclosures opening
excludes liquids and contaminants
from entering
• Quick and easy to operate stainless
steel door clamps around three sides
of doors
• Heavy gauge continuous hinge with
stainless steel hinge pin
• Doors are removable by pulling
stainless steel continuous hinge pin
• Hasp and staple are provided for
padlocking
• Print pocket is provided
• Heavy duty removable lifting eyes
CATALOG BODY/DOOR ENCLOSURE SIZE
Y BACK PANELS*
NUMBER STEEL GAUGE H X W X D
N4S722518FS 12/12
72.12x25.12x18.12 6.38
(1832x638x460) (162)
N4S723124FS 12/12
72.12x31.12x24.12 8.38
(1832x790x613) (213)
N4S723724FS 12/12
72.12x37.12x24.12 10.38
(1832x943x613) (264)
N4S-FS SERIES SINGLE DOOR ENCLOSURES
See pages C29-C31&
I7-I12
*Back panels must be ordered separately.
N4S723724FS
• Doors are sealed with closed cell
neoprene gasket
• Grounding provisions provided
Finish
• ANSI-61 gray polyester powder
inside and out over phosphatized
surfaces
• Optional back panels are white
polyester powder over phosphatized
surfaces
Accessories
• Back panels (reference tables)
• See pages J1-J19
®
R
N4S-FS SERIES ENCLOSURES
NEMA 4 SINGLE DOOR FREESTANDING
D17
DATA SUBJECT TO CHANGE WITHOUT NOTICE
W
0.81
X
H
H-9.13
1.38
6.75
W - 2.44
3.38
H-10.75
OPENING
W-3.75
OPENING
1.16
5.38
X
PADLOCK
HASP &
STAPLE
15.00
MAX.
2.38
9.38
D
Y
1.00
MOUNTING
CHANNEL
W-3.25
2.00
1.62
7.38
Y
CONTINUOUS
HINGE
D
Y
SECTION X-X
NOT TO SCALE
SECTION Y-Y
CLOSED CELL
GASKETING
ENCLOSURES
FREESTANDING ACCESSORIES
C29
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60P24F1 12 48.00x20.00 (1219x508)
WA60P24F2 12 24.88x20.00 (632x508)
WA72P24F1 12 60.00x20.00 (1524x508)
WA72P24F2 12 30.88x20.00 (784x508)
WA90P24F1 12 78.00x20.00 (1981x508)
WA90P24F2 12 39.88x20.00 (1013x508)
WA72P30F1 12 60.00x26.00 (1524x660)
WA72P30F2 12 30.88x26.00 (784x660)
WA60P36F1 12 48.00x32.00 (1219x813)
WA60P36F2 12 24.88x32.00 (632x813)
WA72P36F1 12 60.00x32.00 (1524x813)
WA72P36F2 12 30.88x32.00 (784x813)
WA90P36F1 12 78.00x32.00 (1981x813)
WA90P36F2 12 39.88x32.00 (1013x813)
REGULAR PANELS ONLY (FULL & HALF) NEMA 12 SINGLE DOOR
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60P48F1 10 48.00x44.00 (1219x1118)
WA60P48F2 10 24.88x44.00 (632x1118)
WA72P48F1 10 60.00x44.00 (1524x1118)
WA72P48F2 10 30.88x44.00 (784x1118)
WA72P60F1 10 60.00x56.00 (1524x1422)
WA72P60F2 10 30.88x56.00 (784x1422)
WA72P72F1 10 60.00x68.00 (1524x1727)
WA72P72F2 10 30.88x68.00 (784x1727)
WA90P48F1 10 78.00x44.00 (1981x1118)
WA90P48F2 10 39.88x44.00 (1013x1118)
WA90P72F1 10 78.00x68.00 (1981x1727)
WA90P72F2 10 39.88x68.00 (1013x1727)
REGULAR PANELS ONLY (FULL & HALF) NEMA 12 TWO DOOR
NOTE: Center Panel support is supplied with a regular Two Door Enclosure
Panel. This support is used only as a brace. It is not intended to be used
as a support for Single Door Panels, relay racks, etc.
FULL PANEL
HALF PANEL
CENTER PANEL
SUPPORT
FULL PANEL
HALF PANEL
DATA SUBJECT TO CHANGE WITHOUT NOTICE
ENCLOSURES
FREESTANDING ACCESSORIES
C30
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SP24F3 12 48.00x19.00 (1219x483)
WA60SP24F4 12 24.88x19.00 (632x483)
WA72SP24F3 12 60.00x19.00 (1524x483)
WA72SP24F4 12 30.88x19.00 (784x483)
WA72SP30F3 12 60.00x25.00 (1524x635)
WA72SP30F4 12 30.88x25.00 (784x635)
WA60SP36F3 12 48.00x31.00 (1219x787)
WA60SP36F4 12 24.88x31.00 (632x787)
WA72SP36F3 12 60.00x31.00 (1524x787)
WA72SP36F4 12 30.88x31.00 (784x787)
WA90SP36F3 12 78.00x31.00 (1981x787)
WA90SP36F4 12 39.88x31.00 (1013x787)
SWING OUT PANELS ONLY (FULL & HALF) NEMA 12 SINGLE DOOR
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SMP14 12 48.00x14.00 (1219x356)
WA72SMP14 12 60.00x14.00 (1524x356)
WA72SMP20 12 60.00x20.00 (1524x508)
WA90SMP14 12 78.00x14.00 (1981x356)
WA90SMP20 12 78.00x20.00 (1981x508)
SIDE MOUNT PANELS FOR SINGLE OR DOUBLE DOORS
CATALOG NUMBER DESCRIPTION
WA60FSCPS Center panel support for 60" high enclosures
WA72FSCPS Center panel support for 72" high enclosures
WA90FSCPS Center panel support for 90" high enclosures
CENTER PANEL SUPPORTS
CATALOG NUMBER DESCRIPTION
WAPS1420CN Clamp nut for unistrut
WAPS3816CN Clamp nut for unistrut
WA1032N Clamp nuts for Type (RA) Relay Rack Angles
CLAMP NUTS
WA60SP24F3
WA60SMP14
DATA SUBJECT TO CHANGE WITHOUT NOTICE
ENCLOSURES
FREESTANDING ACCESSORIES
C31
CATALOG NUMBER STEEL GAUGE LENGTH “L”
WA60RP24F5 10 49.00 (1245)
WA60RP24F6 10 26.25 (667)
WA72RP24F5 10 61.25 (1556)
WA72RP24F6 10 31.50 (800)
WA72RP30F5 10 61.25 (1556)
WA72RP30F6 10 31.50 (800)
WA90RP24F5 10 78.75 (2000)
WA90RP24F6 10 40.25 (1022)
RELAY RACK ANGLES (FULL OR HALF) SINGLE DOOR
CATALOG FITS ENCLOSURE RACK ANGLE
NUMBER H X W SIZE LENGTH “L”
WA60RA19TH
60.00x24.00 19.00 49.00
(1524x610) (483) (1245)
WA72RA19TH
72.00x24.00 19.00 61.25
(1829x610) (483) (1556)
WA72RA24TH
72.00x30.00 24.00 61.25
(1829x762) (610) (1556)
WA90RA19TH
90.00x24.00 19.00 78.78
(2286x610) (483) (2001)
RELAY RACK ANGLES WITH THRU HOLES (TYPE RA)
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG FITS ENCLOSURE RACK ANGLE
NUMBER H X W SIZE LENGTH “T”
WA7230S0F19 72.00x30.00 19.00 57.88
(1829x762) (483) (1470)
WA7236S0F19 72.00x36.00 19.00 57.88
(1829x914) (483) (1470)
WA9036S0F19 90.00x36.00 19.00 75.38
(2286x914) (483) (1915)
SWING OUT RACK MOUNTING FRAMES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
WA60RP24F5 WA60RA19TH
WA7230SOF19
DATA SUBJECT TO CHANGE WITHOUT NOTICE
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SOF SERIES SWING-OUT RACKS
ACCESSORY SWING-OUT RACKS FOR FREESTANDING ENCLOSURES
I11
FEATURES-SPECIFICATIONS
Description
• Fabricated from 10 gauge steel,
these swing-out rack mounting
frames are available for mounting
rack mounting equipment. Mounting
holes are tapped with #10-32
threads spaced per E.I.A. standard
• Panels are painted with a white
polyester powder
CATALOG NUMBER
FITS ENCLOSURE
RACK SIZE
USABLE ANGLE
H X W LENGTH “T”
WA7230S0F19 72.00x30.00 (1829x762) 19.00 (483) 57.88 (1470)
WA7236S0F19 72.00x36.00 (1829x914) 19.00 (483) 57.88 (1470)
WA9036S0F19 90.00x36.00 (2286x914) 19.00 (483) 75.38 (1915)
SWING-OUT RACKS FOR FREESTANDING ENCLOSURES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
Quick Release
Latches Provided
T
Usable
Length
Frame Can Be Positioned
Anywhere Front to Back
Enclosure Side
Removed For Clarity
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Hole Detail
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-F1/F2 SERIES BACK PANELS
ACCESSORY PANELS FOR SINGLE DOOR FREESTANDING ENCLOSURES
I7
FEATURES-SPECIFICATIONS
Description
Panels for single-door single-access
and single-door dual-access,
freestanding NEMA 12, freestanding
NEMA 4 and freestanding stainless
steel enclosures.
• Panels are 10 or 12 gauge steel and
can be positioned anywhere along
horizontal depth-wise mounting
channels
• Half-length panels can be located
in the upper or lower portion of the
enclosure
• Mounting hardware is furnished
with each panel
• Panels are painted with a white
polyester powder
• Panels may be used in two-door
enclosures along with other freestanding accessories
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B PANEL TYPE
WA60P24F1 12 48.00x20.00 (1219x508) Full
WA60P24F2 12 24.88x20.00 (632x508) Half
WA72P24F1 12 60.00x20.00 (1524x508) Full
WA72P24F2 12 30.88x20.00 (784x508) Half
WA90P24F1 12 78.00x20.00 (1981x508) Full
WA90P24F2 12 39.88x20.00 (1013x508) Half
WA72P30F1 12 60.00x26.00 (1524x660) Full
WA72P30F2 12 30.88x26.00 (784x660) Half
WA60P36F1 12 48.00x32.00 (1219x813) Full
WA60P36F2 12 24.88x32.00 (632x813) Half
WA72P36F1 12 60.00x32.00 (1524x813) Full
WA72P36F2 12 30.88x32.00 (784x813) Half
WA90P36F1 12 78.00x32.00 (1981x813) Full
WA90P36F2 12 39.88x32.00 (1013x813) Half
BACK PANELS FOR SINGLE DOOR FREESTANDING ENCLOSURES
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Enclosure Side
Removed
Full Panel
Panel Support
Half Panel
Unistrut
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
NOTE: Suffix F1 = Full Panel, and F2 = Half Panel.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-F1/F2 SERIES BACK PANELS
ACCESSORY PANELS FOR TWO DOOR FREESTANDING ENCLOSURES
I8
FEATURES-SPECIFICATIONS
Description
Panels for two-door single-access and
two-door dual-access Free-standing
NEMA 12 enclosures.
• Panels are 10 gauge steel and
can be positioned anywhere along
horizontal depth-wise mounting
channels
• Half-length panels can be located
in the upper or lower portion of the
enclosure
• Mounting hardware is furnished
with each panel
• Panels are painted with a white
polyester powder
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B PANEL TYPE
WA60P48F1 10 48.00x44.00 (1219x1118) Full
WA60P48F2 10 24.88x44.00 (632x1118) Half
WA72P48F1 10 60.00x44.00 (1524x1118) Full
WA72P48F2 10 30.88x44.00 (784x1118) Half
WA72P60F1 10 60.00x56.00 (1524x1422) Full
WA72P60F2 10 30.88x56.00 (784x1422) Half
WA72P72F1 10 60.00x68.00 (1524x1727) Full
WA72P72F2 10 30.88x68.00 (784x1727) Half
WA90P48F1 10 78.00x44.00 (1981x1118) Full
WA90P48F2 10 39.88x44.00 (1013x1118) Half
WA90P72F1 10 78.00x68.00 (1981x1727) Full
WA90P72F2 10 39.88x68.00 (1013x1727) Half
BACK PANELS FOR TWO DOOR FREESTANDING ENCLOSURES
Typical Freestanding
Two Door Enclosure
(Dual Access Shown)
Side Removed
For Clarity
Center Panel
Support
Full Panel
Panel Support
Half Panel
NOTE: Center Panel support is supplied with a regular Two Door Enclosure Panel. This support is used
only as a brace. It is not intended to be used as a support for Single Door Panels, relay racks, etc.
NOTE: Suffix F1 = Full Panel, and F2 = Half Panel.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WASP-F3/F4 SERIES BACK PANELS
ACCESSORY SWING-OUT PANELS FOR FREESTANDING ENCLOSURES
I9
FEATURES-SPECIFICATIONS
Description
Panels for Free Standing NEMA 12
Enclosures and Free Standing NEMA
4 Enclosures.
• Full-length and half-length swing-out
panels are available
• Half-length panels can be located
in the upper or lower portion of the
enclosures
• Mounting can be on either side of
the enclosure
• Mounting hardware is furnished
with each panel
• Panels are fabricated from
12 gauge steel
• Panels may be used in two-door
enclosures along with other
free-standing accessories
• Panels are painted with a white
polyester powder
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B PANEL TYPE
WA60SP24F3 12 48.00x19.00 (1219x483) Full
WA60SP24F4 12 24.88x19.00 (632x483) Half
WA72SP24F3 12 60.00x19.00 (1524x483) Full
WA72SP24F4 12 30.88x19.00 (784x483) Half
WA72SP30F3 12 60.00x25.00 (1524x635) Full
WA72SP30F4 12 30.88x25.00 (784x635) Half
WA60SP36F3 12 48.00x31.00 (1219x787) Full
WA60SP36F4 12 24.88x31.00 (632x787) Half
WA72SP36F3 12 60.00x31.00 (1524x787) Full
WA72SP36F4 12 30.88x31.00 (784x787) Half
WA90SP36F3 12 78.00x31.00 (1981x787) Full
WA90SP36F4 12 39.88x31.00 (1013x787) Half
SWING-OUT PANELS FOR FREESTANDING ENCLOSURES
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Panel Support
Swing-out Panel
Full or Half
(Half Shown)
Enclosure Side
Removed
Unistrut
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
NOTE: Suffix F3 = Full Panel, and F4 = Half Panel.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SMP SERIES BACK PANELS
ACCESSORY SIDE-MOUNT PANELS FOR FREESTANDING ENCLOSURES
I10
FEATURES-SPECIFICATIONS
Description
Panels for Freestanding NEMA 12 and
Freestanding NEMA 4 Enclosures.
• Panels are fabricated from 12 gauge
steel
• They provide extra mounting space
on the sides of the enclosures
• Panels attach securely to mounting
channels
• Panel mounting hardware is included
• Panels are painted with a white
polyester powder
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SMP14 12 48.00x14.00 (1219x356)
WA72SMP14 12 60.00x14.00 (1524x356)
WA72SMP20 12 60.00x20.00 (1524x508)
WA90SMP14 12 78.00x14.00 (1981x356)
WA90SMP20 12 78.00x20.00 (1981x508)
SIDE-MOUNT PANELS FOR FREESTANDING ENCLOSURES
Typical Freestanding
Single Door Enclosure
(Single Access Shown)
Side Panel
Full or Half
Unistrut
DATA SUBJECT TO CHANGE WITHOUT NOTICE
WA-SOF SERIES RACK ANGLES
ACCESSORY RACK COMPONENTS FOR FREESTANDING ENCLOSURES
I12
FEATURES-SPECIFICATIONS
Type RP
For Free Standing NEMA 12 Enclosures
• Fabricated from 10 gauge steel
• Full-length or half-length rack
mounting angles are available for
mounting rack-mounted equipment
• If used in Two-Door Enclosures
a center panel support must be
ordered
• Finish is a white polyester powder
Type RA
For all Free Standing NEMA 12 and
NEMA 4 Enclosures
• Designed for mounting 19 inch and
24 inch rack mounted equipment
• Through holes (7/32 Dia.) are provided
and require a W1032N clip nut
(must be ordered separately)
• Rack angles are mounted on unistrut
within the Free Standing enclosures
and are adjustable
• If used in Two-Door Enclosures
a center panel support must be
ordered
• Finish is a white polyester powder
CATALOG NUMBER STEEL GAUGE LENGTH “L”
WA60RP24F5 10 49.00 (1245)
WA60RP24F6 10 26.25 (667)
WA72RP24F5 10 61.25 (1556)
WA72RP24F6 10 31.50 (800)
WA72RP30F5 10 61.25 (1556)
WA72RP30F6 10 31.50 (800)
WA90RP24F5 10 78.75 (2000)
WA90RP24F6 10 40.25 (1022)
RELAY RACK ANGLES
CATALOG NUMBER FITS ENCLOSURE H X W RACK SIZE ANGLE LENGTH “L”
WA60RA19TH 60.00x24.00 (1524x610) 19.00 (483) 49.00 (1245)
WA72RA19TH 72.00x24.00 (1829x610) 19.00 (483) 61.25 (1556)
WA72RA24TH 72.00x30.00 (1829x762) 24.00 (610) 61.25 (1556)
WA90RA19TH 90.00x24.00 (2286x610) 19.00 (483) 78.78 (2001)
WA-RA RELAY RACK ANGLES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
Standard E.I.A.
Spacing
Standard E.I.A.
Spacing
D & T 10- 32
Loading...