Page 1
DATA SUBJECT TO CHANGE WITHOUT NOTICE
N412-WSS SERIES ENCLOSURES
NEMA 4X SINGLE DOOR WALL-MOUNT WITH WINDOW
E18
FEATURES-SPECIFICATIONS
Applications
The Hubbell Wiegmann N412-SS
stainless steel series, with its streamline design, is a perfect fit for mounting
electrical or high-tech electronic equipment. It is typically used in the following
areas where corrosion-resistant
protection is needed: food processing
plants, pharmaceutical manufacturing
facilities, petrochemical plants, pulp
and paper processing, and waste
water treatment facilities.
Construction
• Bodies and doors fabricated from
14 gauge 304 stainless steel
• Continuously welded seams
• Body stiffeners are included in larger
enclosures for added rigidity
• Doors are interchangeable and easily
removable
• Grounding studs are welded to door
and body assuring a positive ground
• 1/4-turn semi-flush oil tight latches
are supplied to hold door securely
closed
• Optional mounting foot kits are
available**
• Grounding provisions provided
• Print pocket is provided
• Doors are sealed with poured-inplace polyurethane gasket
• Plexiglass viewing window
• Mounting holes in rear of enclosure
• Collar studs for mounting optional
back panel
Finish
• All exterior surfaces have a smooth
grained finish
• Optional back panels are white
polyester powder over phosphatized
surfaces
Accessories
• Optional N412MFKSS mounting
foot kit**
• Back panels (reference tables)
• See pages J1-J19
CATALOG BODY/DOOR ENCLOSURE SIZE VIEWABLE BACK PANEL DOOR BACK PANEL
CE
NUMBER STEEL GAUGE H X W X D WINDOW AREA CATALOG NUMBER* STIFFENER SIZE A X B
N412121206WSS6 14/14
12.00x12.00x6.00 7.50 x 6.25
NP1212 No
9.00x9.00 6.00
—
(305x305x152) (191 x 159) (229x229) (152)
N412161206WSS6 14/14
16.00x12.00x6.00 11.50 x 6.25
NP1612 No
13.00x9.00 8.00
—
(406x305x152) (292 x 159) (330x229) (203)
N412201606WSS6 14/14
20.00x16.00x6.00 15.50 x 10.25
NP2016 No
17.00x13.00 10.00
—
(508x406x152) (394 x 260) (432x330) (254)
N412201608WSS6 14/14
20.00x16.00x8.00 15.50 x 10.25
NP2016 No
17.00x13.00 10.00
—
(508x406x203) (394 x 260) (432x330) (254)
N412202008WSS6 14/14
20.00x20.00x8.00 15.50 x 14.25)
NP2020 No
17.00x17.00 10.00
—
(508x508x203) (394 x 362) (432x432) (254)
N412242008WSS6 14/14
24.00x20.00x8.00) 19.50 x 14.25
NP2420 No
21.00x17.00) 12.00)
—
(610x508x203 (495 x 362) (533x432 (305
N412242408WSS6 14/14
24.00x24.00x8.00 19.50 x 18.25
NP2424 No
21.00x21.00 4.00 16.00
(610x610x203) (495 x 464) (533x533) (102) (406)
N412302408WSS6 14/14
30.00x24.00x8.00 25.50 x 18.25
NP3024 No
27.00x21.00) 4.00 22.00
(762x610x203) (648 x 464) (686x533 (102) (559)
N412202012WSS6 14/14
20.00x20.00x12.00 15.50 x 14.25
NP2020 No
17.00x17.00 10.00
—
(508x508x305) (394 x 362) (432x432) (254)
N412302412WSS6 14/14
30.00x24.00x12.00 25.50 x 18.25
NP3024 No
27.00x21.00 4.00 22.00
(762x610x305) (648 x 464) (686x533) (102) (559)
N412-SSW SERIES SINGLE DOOR WITH WINDOW STAINLESS ENCLOSURES
6 NEW PRODUCT IN 2003
*Back panels must be ordered separately.
Industry Standards
UL 508, Types 4, 4X & 12
CSA Certified, Types 4 & 12
NEMA/EEMAC Type 4, 4X & 12
JIC EL-1-71
UL Files E64791
CSA File LL66078
N412202006WSS
®
R
Page 2
DATA SUBJECT TO CHANGE WITHOUT NOTICE
N412-WSS SERIES ENCLOSURES
NEMA 4X SINGLE DOOR WALL-MOUNT WITH WINDOW
E19
H
2.00 TYP
Ø 0.44 TYP
MOUNTING
PROVISION
W
CAST HINGES
WITH REMOVABLE
HINGE PINS (SEE NOTE 3)
0.88 TYP
0.88 TYP
SEE DETAIL A
2.00
C
E
1/4 TURN LATCHES
POLYCARBONATE
WINDOW
1.50
A
0.75 TYP
0.75
TYP
PANEL
(Order
Separately)
0.75
1.50
1.41
0.79
D
X
1.09
X
OPTIONAL MOUNTING FOOT
ALTERNATE POSITION
Ø 0.41
1.50
B
1.50
SECTION X-X
1.50
ENCLOSURE
DETAIL A
OPTIONAL MOUNTING FOOT
Notes:
1. Large Print Pocket (8X10) is furnished if H=20.00" or more
and W=20.00" or more, otherwise small (6X6) print pocket is provided.
2. Two Hinges provided with each enclosure.
0.75
1.50
Page 3
NP SERIES BACK PANELS
ACCESSORY PANELS FOR NEMA 1, 3R, 12, 4 & 4X WALL-MOUNTS
I4
FEATURES-SPECIFICATIONS
Description
• Steel and stainless panels are
12 gauge
• Aluminum panels are 5052-H32
aluminum alloy, .080-inch thick
• Panel with any side over 17.00"
has 3/4" flange on all sides
• Steel panels are painted white
polyester powder
• Panels fit the following enclosures:
– NEMA 1, Large (NIC)
– NEMA 3R, Hinge Cover (RHC, Large)
– NEMA 4, 412, & 4X
Single Door (N12, N4, N412, SSN4)
– NEMA 12
2-Door Wall-Mount, (WAWF),
Single Door
Right Flange Disconnect
(SDN12, ABN12)
Large JIC (B-CH, Large)
Single door N12
CATALOG NUMBER
PAINTED STEEL 316 STAINLESS PANEL SIZE A X B
(WHITE) STEEL
ALUMINUM
NP1212 — — 9.00X9.00 (229X229)
NP1224 — — 9.00X21.00 (229X533)
NP1612 NP1612SSA ALNP1612 13.00X9.00 (330X229)
NP1616 NP1616SSA ALNP1616 13.00X13.00 (330X330)
NP1620 — — 17.00X13.00 (432X330)
NP2012 — — 17.00X9.00 (432X229)
NP2016 NP2016SSA ALNP2016 17.00X13.00 (432X330)
NP2024 — 21.00X17.00 (533X432)
NP2020 NP2020SSA ALNP2020 17.00X17.00 (432X432)
NP2412 — — 21.00X9.00 (533X229)
NP2416 NP2416SSA — 21.00X13.00 (533X330)
NP2420 NP2420SSA ALNP2420 21.00X17.00 (533X432)
NP2424 NP2424SSA ALNP2424 21.00X21.00 (533X533)
NP2430 — — 27.00X21.00 (686X533)
NP3016 — — 27.00X13.00 (686X330)
NP3020 NP3020SSA — 27.00X17.00 (686X432)
NP3024 NP3024SSA ALNP3024 27.00X21.00 (686X533)
NP3030 NP3030SSA — 27.00X27.00 (686X686)
NP3036 — — 33.00X27.00 (838X686)
NP3042 — — 39.00X27.00 (991X686)
NP3624 NP3624SSA ALNP3624 33.00X21.00 (838X533)
NP3630 NP3630SSA ALNP3630 33.00X27.00 (838X686)
NP3636 NP3636SSA — 33.00X33.00 (838X838)
NP3642 — — 39.00X33.00 (991X838)
NP4024 — — 37.00X21.00 (940X533)
NP4224 — — 39.00X21.00 (991X533)
NP4230 NP4230SSA — 39.00X27.00 (991X686)
NP4236 NP4236SSA — 39.00X33.00 (991X838)
NP4824 — — 45.00X21.00 (1143X533)
NP4830 — — 45.00X27.00 (1143X686)
NP4836 NP4836SSA ALNP4836 45.00X33.00 (1143X838)
NP6030 — — 57.00X27.00 (1448X686)
NP6036 NP6036SSA ALNP6036 57.00X33.00 (1448X838)
NP7230 — — 69.00X27.00 (1753X686)
NP7236 — — 69.00X33.00 (1753X838)
BACK PANELS FOR NEMA 1, 3R, 12, 4 & 4X WALL-MOUNT ENCLOSURES
B
A
Ø .563 TYP.
.875 TYP.
.875 TYP.
IF "A" IS LESS THAN 31"
OMIT MIDDLE HOLES
IF "B" IS LESS THAN 31"
OMIT MIDDLE HOLES
(SEE TABLE)
SIDE FLANGES
.75
TOP VIEW
SIDE VIEW
FRONT VIEW
2.0
2.0
Ø .312 TYP. (2PL)
GROUND HOLE
DATA SUBJECT TO CHANGE WITHOUT NOTICE
NP1212
Loading...