Page 1
DATA SUBJECT TO CHANGE WITHOUT NOTICE
N412-SS SERIES ENCLOSURES
NEMA 4X SINGLE DOOR WALL-MOUNT
E16
FEATURES-SPECIFICATIONS
Applications
The Hubbell Wiegmann N412-SS
stainless steel series, with its streamline design, is a perfect fit for mounting
electrical or high-tech electronic
equipment in a variety of indoor and
outdoor settings. It is typically used
in the following areas where corrosionresistant protection is needed: food
processing plants, pharmaceutical
manufacturing facilities, petrochemical
plants, pulp and paper processing,
and waste water treatment facilities.
Construction
• Bodies and doors fabricated from
14 gauge 304 stainless steel and
14 gauge 316 stainless steel
Industry Standards
UL 508, Types 4, 4X, 12, & 13
CSA Certified, Types 4 & 12
NEMA/EEMAC Type 4, 4X, 12, & 13
JIC EL-1-71
UL Files E64791
CSA File LL66078
• Continuously welded seams
• Body stiffeners are included in larger
enclosures for added rigidity
• Doors are interchangeable and easily
removable
• Grounding studs are welded to door
and body assuring a positive ground
• 1/4-turn semi-flush oil tight latches
are supplied to hold door securely
closed
• Optional mounting foot kits are
available**
• Grounding provisions provided
• Print pocket is provided
• Doors are sealed with poured-inplace polyurethane gasket
• Mounting holes in rear of enclosure
• Collar studs for mounting optional
back panel
Finish
• All exterior surfaces have a smooth
grained finish
• Optional back panels are white
polyester powder over phosphatized
surfaces
Accessories
• Optional N412MFKSS mounting
foot kit**
• Back panels (reference tables)
• See pages J1-J19
N412201606SS
BODY/DOOR BACK PANEL
DOOR
CATALOG NUMBER
STEEL
ENCLOSURE SIZE
CATALOG NUMBER*
STIFFENER
BACK PANEL
CE
304 S.S. 316 S.S.
GAUGE
H X W X D
WHITE 316 S.S.
SIZE A X B
N412121206SS6 N412121206SSA6 14/14
12.00x12.00x6.00
NP1212 —No
9.00x9.00 6.00
—
(305x305x152) (229x229) (152)
N412161206SS N412161206SSA6 14/14
16.00x12.00x6.00
NP1612 NP1612SSA6 No
13.00x9.00 8.00
—
(406x305x152) (330x229) (203)
N412161606SS6 N412161606SSA6 14/14
16.00x16.00x6.00
NP1616 NP1616SSA6 No
13.00x13.00 8.00
—
(406x406x152) (330x330) (203)
N412201606SS N412201606SSA6 14/14
20.00x16.00x6.00
NP2016 NP2016SSA6 No
17.00x13.00 10.00
—
(508x406x152) (432x330) (254)
N412202006SS6 N412202006SSA6 14/14
20.00x20.00x6.00
NP2020 NP2020SSA6 No
17.00x17.00 10.00
—
(508x508x152) (432x432) (254)
N412161208SS6 N412161208SSA6 14/14
16.00x12.00x8.00
NP1612 NP1612SSA6 No
13.00x9.00 8.0
—
(406x305x203) (330x229) (203)
N412161608SS6 N412161608SSA6 14/14
16.00x16.00x8.00
NP1616 NP1616SSA6 No
13.00x13.00 8.00
—
(406x406x203) (330x330) (203)
N412162008SS6 N412162008SSA6 14/14
16.00x20.00x8.00
NP2016 —No
13.00x17.00 8.00
—
(406x508x203) (330x432) (203)
N412201608SS6 N412201608SSA6 14/14
20.00x16.00x8.00
NP2016 NP2016SSA6 No
17.00x13.00 10.00
—
(508x406x203) (432x330) (254)
N412202008SS N412202008SSA6 14/14
20.00x20.00x8.00
NP2020 NP2020SSA6 No
17.00x17.00 10.00
—
(508x508x203) (432x432) (254)
N412-SS SERIES SINGLE DOOR STAINLESS ENCLOSURES
Continued on page E17
®
R
Page 2
DATA SUBJECT TO CHANGE WITHOUT NOTICE
N412-SS SERIES ENCLOSURES
NEMA 4X SINGLE DOOR WALL-MOUNT
E17
BODY/DOOR BACK PANEL
DOOR
CATALOG NUMBER
STEEL
ENCLOSURE SIZE
CATALOG NUMBER*
STIFFENER
BACK PANEL
CE
304 S.S. 316 S.S.
GAUGE
H X W X D
WHITE 316 S.S.
N412241608SS6 N412241608SSA6 14/14
24.00x16.00x8.00
NP2416 NP2416SSA6 No
21.00x13.00 10.00
—
(610x406x203) (533x330) (254)
N412242008SS N412242008SSA6 14/14
24.00x20.00x8.00
NP2420 NP2420SSA6 No
21.00x17.00 12.00
—
(610x508x203) (533x432) (305)
N412242408SS N412242408SSA6 14/14
24.00x24.00x8.00
NP2424 NP2424SSA6 No
21.00x21.00 4.00 16.00
(610x610x203) (533x533) (102) (406)
N412302408SS N412302408SSA6 14/14
30.00x24.00x8.00
NP3024 NP3024SSA6 No
27.00x21.00 4.00 22.00
(762x610x203) (686x533) (102) (559)
N412303008SS N412303008SSA6 14/14
30.00x30.00x8.00
NP3030 NP3030SSA6 No
27.00x27.00 4.00 22.00
(762x610x203) (686x686) (102) (559)
N412362408SS6 N412362408SSA6 14/14
36.00x24.00x8.00
NP3624 NP3624SSA6 No
33.00x21.00 4.00 28.00
(914x610x203) (838x533) (102) (711)
N412363008SS N412363008SSA6 14/14
36.00x30.00x8.00
NP3630 NP3630SSA6 No
33.00x27.00 4.00 28.00
(914x762x203) (838x686) (102) (711)
N412202012SS6 N412202012SSA6 14/14
20.00x20.00x12.00
NP2020 NP2020SSA6 No
17.00x17.00 10.00
—
(508x508x305) (432x432) (254)
N412242412SS6 N412242412SSA6 14/14
24.00x24.00x12.00
NP2424 NP2424SSA6 No
21.00x21.00 4.00 16.00
(610x610x305) (533x533) (102) (406)
N412302412SS6 N412302412SSA6 14/14
30.00x24.00x12.00
NP3024 NP3024SSA6 No
27.00x21.00 4.00 22.00
(762x610x305) (686x533) (102) (559)
N412362412SS6 N412362412SSA6 14/14
36.00x24.00x12.00
NP3624 NP3624SSA6 No
33.00x21.00 4.00 28.00
(914x610x305) (838x533) (102) (711)
N412363012SS6 N412363012SSA6 14/14
36.00x30.00x12.00
NP3630 NP3630SSA6 No
33.00x27.00 4.00 28.00
(914x762x305) (838x686) (102) (711)
N412363612SS N412363612SSA6 14/14
36.00x36.00x12.00
NP3636 NP3636SSA6 Yes
33.00x33.00 4.00 28.00
) (914x914x305) (838x838) (102) (711)
N412423612SS6 N412423612SSA6 14/14
42.00x36.00x12.00
NP4236 NP4236SSA6 Yes
39.00x33.00 21.00
—
(1067x914x305) (991x838) (533)
N412483612SS6 N412483612SSA6 14/14
48.00x36.00x12.00
NP4836 NP4836SSA6 Yes
45.00x33.00 24.00
—
(1219x914x305) (1143x838) (610)
N412603612SS***6 N412603612SSA6 14/14
60.00x36.00x12.00
NP6036 NP6036SSA6 Yes
57.00x33.00 30.00
—
(1524x914x305) (1448x838) (762)
N412-SS SERIES SINGLE DOOR STAINLESS ENCLOSURES
6 NEW PRODUCT IN 2003
*Back panels must be ordered separately.
**Mounting kits must be installed to maintain the NEMA Type 4, 12, and 13 ratings.
***Enclosures are supplied with closed cell neoprene gasket (not foam-in-place).
W
2.00
SEE
DETAIL A
0.79
D
X
Ø0.44 TYP
MOUNTING
PROVISION
0.88 TYP
1.50
0.75 TYP
C
0.88 TYP
PRINT POCKET
C
H
2.00 TYP
CAST SST HINGES
WITH REMOVABLE
SST HINGE PINS (SEE NOTE 3)
PROVIDED
ENCLOSURE
1.50
E
1/4 TURN
LATCHES
DOOR STIFFENER
SEE TABLE
1.34
0.75
OPTIONAL MOUNTING FOOT
ALTERNATE POSITION
ÿ0.41
0.75
1.50
DETAIL A
OPTIONAL MOUNTING FOOT
X
1.09
1.50
H-6.00
SECTION X-X
Notes:
1. Enclosures include a 3-point
latch when H=40.00" or more.
2. Large Print Pocket (8X10) is
furnished if H=20.00" or more
and W=20.00" or more, otherwise
small (6X6) print pocket is provided.
3. Two Hinges provided when
H<36.00". Three Hinges
provided when H=36.00" or
greater. Four Hinges provided
when H=48.00" or greater.
A
B
1.50
OMIT MIDDLE STUDS
IF W < 31.00"
0.75
TYP
PANEL
(Order
Separately)
1.50
OMIT MIDDLE
STUDS
IF H < 31.00"
BODY STIFFENER
OMIT IF H OR
W = 28.00"
OR LESS
Page 3
NP SERIES BACK PANELS
ACCESSORY PANELS FOR NEMA 1, 3R, 12, 4 & 4X WALL-MOUNTS
I4
FEATURES-SPECIFICATIONS
Description
• Steel and stainless panels are
12 gauge
• Aluminum panels are 5052-H32
aluminum alloy, .080-inch thick
• Panel with any side over 17.00"
has 3/4" flange on all sides
• Steel panels are painted white
polyester powder
• Panels fit the following enclosures:
– NEMA 1, Large (NIC)
– NEMA 3R, Hinge Cover (RHC, Large)
– NEMA 4, 412, & 4X
Single Door (N12, N4, N412, SSN4)
– NEMA 12
2-Door Wall-Mount, (WAWF),
Single Door
Right Flange Disconnect
(SDN12, ABN12)
Large JIC (B-CH, Large)
Single door N12
CATALOG NUMBER
PAINTED STEEL 316 STAINLESS PANEL SIZE A X B
(WHITE) STEEL
ALUMINUM
NP1212 — — 9.00X9.00 (229X229)
NP1224 — — 9.00X21.00 (229X533)
NP1612 NP1612SSA ALNP1612 13.00X9.00 (330X229)
NP1616 NP1616SSA ALNP1616 13.00X13.00 (330X330)
NP1620 — — 17.00X13.00 (432X330)
NP2012 — — 17.00X9.00 (432X229)
NP2016 NP2016SSA ALNP2016 17.00X13.00 (432X330)
NP2024 — 21.00X17.00 (533X432)
NP2020 NP2020SSA ALNP2020 17.00X17.00 (432X432)
NP2412 — — 21.00X9.00 (533X229)
NP2416 NP2416SSA — 21.00X13.00 (533X330)
NP2420 NP2420SSA ALNP2420 21.00X17.00 (533X432)
NP2424 NP2424SSA ALNP2424 21.00X21.00 (533X533)
NP2430 — — 27.00X21.00 (686X533)
NP3016 — — 27.00X13.00 (686X330)
NP3020 NP3020SSA — 27.00X17.00 (686X432)
NP3024 NP3024SSA ALNP3024 27.00X21.00 (686X533)
NP3030 NP3030SSA — 27.00X27.00 (686X686)
NP3036 — — 33.00X27.00 (838X686)
NP3042 — — 39.00X27.00 (991X686)
NP3624 NP3624SSA ALNP3624 33.00X21.00 (838X533)
NP3630 NP3630SSA ALNP3630 33.00X27.00 (838X686)
NP3636 NP3636SSA — 33.00X33.00 (838X838)
NP3642 — — 39.00X33.00 (991X838)
NP4024 — — 37.00X21.00 (940X533)
NP4224 — — 39.00X21.00 (991X533)
NP4230 NP4230SSA — 39.00X27.00 (991X686)
NP4236 NP4236SSA — 39.00X33.00 (991X838)
NP4824 — — 45.00X21.00 (1143X533)
NP4830 — — 45.00X27.00 (1143X686)
NP4836 NP4836SSA ALNP4836 45.00X33.00 (1143X838)
NP6030 — — 57.00X27.00 (1448X686)
NP6036 NP6036SSA ALNP6036 57.00X33.00 (1448X838)
NP7230 — — 69.00X27.00 (1753X686)
NP7236 — — 69.00X33.00 (1753X838)
BACK PANELS FOR NEMA 1, 3R, 12, 4 & 4X WALL-MOUNT ENCLOSURES
B
A
Ø .563 TYP.
.875 TYP.
.875 TYP.
IF "A" IS LESS THAN 31"
OMIT MIDDLE HOLES
IF "B" IS LESS THAN 31"
OMIT MIDDLE HOLES
(SEE TABLE)
SIDE FLANGES
.75
TOP VIEW
SIDE VIEW
FRONT VIEW
2.0
2.0
Ø .312 TYP. (2PL)
GROUND HOLE
DATA SUBJECT TO CHANGE WITHOUT NOTICE
NP1212
Loading...