Page 1
Construction
• Hot compression molded fiberglass reinforced thermoset polyester
•
Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal
• Recessed pan head screws – no protruding
surfaces
• 300 Series stainless used on all external
hardware
• Rounded edges, minimal protrusions or
exposed pocket area for accumulation of
dust or debris
• Molded in flange for easy mounting
•
Panel mounting capability for fixed rear panel
• Raised bosses with brass inserts accepting
10-32 screws for optional panel mounting
• Stainless steel beaded cover retention chain
• Workable material cuts, drills, punches and
saws with ease and accuracy
• Submersible, non-corrosive environmental
design
• Lift off cover
•
Non-conductive, impact resistant, UV resistant
• Smooth surface, no color variations, swirls
or color pockets, no voids
• Color: Gray
Listings
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• UL File E64791
• CSA Standard C22.2 File 222873
Types 1, 3, 4x, 6P, 12
• NEMA Standard 250
Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
DATA SUBJECT TO CHANGE WITHOUT NOTICE
14
JIC Series – Non-Metallic Enclosures
Opaque, Lift-off Cover with Four Screws
HW-J100805SC
Crowned Cover Model Shown
JIC Series with Opaque Lift off Four-Screw Cover
Part Number
Enclosure
Overall Size
HxWxD
Enclosure Inside
Dimensions
AxBxC
Wt.
Carbon Steel
Subpanel
Fiberglass
Subpanel
Stainless Steel
Subpanel
Aluminum
Subpanel
HW-J60404SC
7.50 x 5.43 x 4.75
(191 x 138 x 121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs.
HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604SC
7.50 x 7.50 x 4.75
(191 x 191 x 121)
5.72 x 5.72 x 4.45
(145 x 145 x 113)
2.75 lbs.
HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604SC
9.62 x 7.50 x 4.74
(244 x 191 x 121)
7.73 x 5.74 x 4.45
(196 x 146 x 113)
3.5 lbs.
HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804SC
11.62 x 9.41 x 4.25
(295 x 239 x 108)
9.73 x 7.73 x 3.98
(247 x 196 x 101)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805SC
(crowned cover)*
11.62 x 9.37 x 5.06
(295 x 238 x 129)
9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005SC
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299 x 249 x 125)
6.5 lbs.
HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206SC
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs.
HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406SC
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs
HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW- J181608SC
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs
HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608SC
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs
HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4”. Crowned cover is available only in 10x8x5 size enclosure.
R
Page 2
DATA SUBJECT TO CHANGE WITHOUT NOTICE
15
JIC Series – Non-Metallic Enclosures
Opaque, Hinged Cover with Two Screws
JIC Series with Opaque, Hinged, Two-Screw Cover
Part Number
Enclosure
Overall Size
HxWxD
Enclosure Inside
Dimensions
AxBxC
Wt.
Carbon Steel
Subpanel
Fiberglass
Subpanel
Stainless Steel
Subpanel
Aluminum
Subpanel
HW-J60404CHSC
7.50 x 5.43 x 4.75
(191 x 138 x 121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs.
HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604CHSC
7.50 x 7.50 x 4.75
(191 x 191 x 121)
5.72 x 5.72 x 4.45
(145 x 145 x 113)
2.75 lbs.
HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604CHSC
9.62 x 7.50 x 4.74
(244 x 191 x 121)
7.73 x 5.74 x 4.45
(196 x 146 x 113)
3.5 lbs.
HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804CHSC
11.62 x 9.41 x 4.25
(295 x 239 x 108
9.73 x 7.73 x 3.98 )
(247 x 196 x 101)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805CHSC
(crowned cover)*
11.62 x 9.37 x 5.06
(295 x 238 x 129)
9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005CHSC
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299 x 249 x 125)
6.5 lbs.
HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206CHSC
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs.
HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406CHSC
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs
HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW- J181608CHSC
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs
HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608CHSC
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs
HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4”. Crowned cover is available only in 10x8x5 size enclosure.
HW-J100804CHSC
Construction
• Hot compression molded fiberglass reinforced thermoset polyester
•
Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal
• Recessed pan head screws – no protruding
surfaces
• 300 Series stainless steel used on all external hardware
• Rounded edges, minimal protrusions or
exposed pocket area for accumulation of
dust or debris
• Molded in flange for easy mounting
•
Panel mounting capability for fixed rear panel
• Raised bosses with brass inserts accepting
10-32 screws for optional panel mounting
• Workable material cuts, drills, punches and
saws with ease and accuracy
• Submersible, non-corrosive environmental
design
• Full length stainless steel hinged cover
• Full 180° door opening
•
Non-conductive, impact resistant, UV resistant
• Smooth surface, no color variations, swirls
or color pockets, no voids
• Color: Gray
Listings
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• UL File E64791
• CSA Standard C22.2 File 222873
Types 1, 3, 4x, 6P, 12
• NEMA Standard 250
Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
R
Page 3
JIC Series with Opaque Hinged Cover and Quick Release Latches
Part Number
Enclosure
Overall Size
HxWxD
Enclosure
Inside AxBxC
Wt.
Carbon Steel
Subpanel
Fiberglass
Subpanel
Stainless Steel
Subpanel
Aluminum
Subpanel
HW-J60404CHQR
7.50 x 5.43 x 4.75
(191 x 138 x 121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs.
HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604CHQR
7.50 x 7.50 x 4.75
(191 x 191 x 121)
5.72 x 5.72 x 4.45
(145 x 145 x 113)
2.75 lbs.
HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604CHQR
9.62 x 7.50 x 4.74
(244 x 191 x 121)
7.73 x 5.74 x 4.45
(196 x 146 x 113)
3.5 lbs.
HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804CHQR
11.62 x 9.41 x 4.25
(295 x 239 x 108)
9.73 x 7.73 x 3.98
(247 x 196 x 101)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805CHQR
(crowned cover)*
11.62 x 9.37 x 5.06
(295 x 238 x 129)
9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005CHQR
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299 x 249 x 125)
6.5 lbs.
HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206CHQR
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs.
HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406CHQR
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs.
HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW-J181608CHQR
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs.
HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608CHQR
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs
HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4”. Crowned cover is available only in 10x8x5 size enclosure.
Construction
• Hot compression molded fiberglass reinforced thermoset polyester
•
Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal
• Recessed pan head screws – no protruding
surfaces
• 300 Series stainless steel used on all external hardware
• Rounded edges, minimal protrusions or
exposed pocket areas for accumulation of
dust or debris
• Molded in flange for easy mounting
•
Panel mounting capability for fixed rear panel
• Raised bosses with brass inserts accepting
10-32 screws for optional panel mounting
• Workable material cuts, drills, punches and
saws with ease and accuracy
• Submersible, non-corrosive environmental
design
• Full length stainless steel hinged cover
• Integral hasp provides secure loop for padlock (padlock not included)
•
Non-conductive, impact resistant, UV resistant
• Smooth surface, no color variations, swirls
or color pockets, no voids
• Color: Gray
Listings
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• UL File E64791
• CSA Standard C22.2 File 222873
Types 1, 3, 4x, 6P, 12
• NEMA Standard 250
Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
DATA SUBJECT TO CHANGE WITHOUT NOTICE
16
JIC Series – Non-Metallic Enclosures
Opaque, Hinged Cover with Quick Release Latches
HW-J121005CHQR
R
Page 4
DATA SUBJECT TO CHANGE WITHOUT NOTICE
17
JIC Series – Non-Metallic Enclosures
Hinged Cover with Link-lock Latches and Window
HW-J121005CHTLW
Construction
• Hot compression molded fiberglass reinforced thermoset polyester
•
Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal
• Full length stainless steel hinge
• 300 Series stainless steel used on all
external hardware
• Rounded edges, minimal protrusions or
exposed pocket area for accumulation of
dust or debris
• Molded in flange for easy mounting
•
Panel mounting capability for fixed rear panel
• Raised bosses with brass inserts accepting
10-32 screws for optional panel mounting
• Workable material cuts, drills, punches and
saws with ease and accuracy
• Link lock latch for quick entry
• Latch lies flat on side of enclosure
• Scratch and abrasion resistant UVA acrylic
flush bonded window
• Submersible, non-corrosive environmental
design
• Full 180° door opening
•
Non-conductive, impact resistant, UV resistant
• Smooth surface, no color variations, swirls
or color pockets, no voids
• Color: Gray
Listings
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• UL File E64791
• CSA Standard C22.2 File 222873
Types 1, 3, 4x, 6P, 12
• NEMA Standard 250
Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Window flammability: UL94V-0
• Non-flame propagating
JIC Series with Window and Two Link-lock Latches
Part Number
Enclosure
Overall Size
HxWxD
Enclosure
Inside
AxBxC
Wt.
Carbon Steel
Subpanel
Fiberglass
Subpanel
Stainless Steel
Subpanel
Aluminum
Subpanel
HW-J60404CHTLW
7.50 x 5.43 x 4.75
(191 x 138 x 121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs.
HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604CHTLW
7.50 x 7.50 x 4.75
(191 x 191 x 121)
5.72 x 5.72 x 4.45
(145 x 145 x 113)
2.75 lbs.
HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604CHTLW
59.62 x 7.50 x 4.74
(244 x 191 x 121)
7.73 x 5.74 x 4.45
(196 x 146 x 113)
3.5 lbs.
HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804CHTLW
11.62 x 9.41 x 4.25
(295 x 239 x 108)
9.73 x 7.73 x 3.98
(247 x 196 x 101)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805CHTLW
(crowned cover)*
11.62 x 9.37 x 5.06
(295 x 238 x 129)
9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs.
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005CHTLW
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299 x 249 x 125)
6.5 lbs
HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206CHTLW
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs.
HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406CHTLW
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs.
HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW-J181608CHTLW
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs.
HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608CHTLW
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs.
HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4”. Crowned cover is available only in 10x8x5 size enclosure.
Note: 1816 and 2016 sizes are not 6P Rated.
R
Page 5
JIC Series with Quick Release Latches and Window
Part Number
Enclosure
Overall Size
HxWxD
Enclosure
Inside AxBxC
Window
Area
(Maximum)
Wt.
Carbon Steel
Subpanels
Fiberglass
Subpanels
Stainless
Steel
Subpanels
Aluminum
Subpanels
HW-J60404CHQRW
7.50 x 5.43 x 4.75
(191 x 138 x 121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
4.25 x 2.25
(108 x 57)
2.5 lbs
HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604CHQRW
7.50 x 7.50 x 4.75
(191 x 191 x 121)
5.72 x 5.72 x 4.45
(145 x 145 x 113)
4.25 x 4.25
(108 x108)
2.75 lbs
HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604CHQRW
9.62 x 7.50 x 4.74
(244 x 191 x 121)
7.73 x 5.74 x 4.45
(196 x 146 x 113)
6.25 x 4.25
(159 x 108)
3.5 lbs
HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804CHQRW
11.62 x 9.41 x 4.25
(295 x 239 x 108)
9.73 x 7.73 x 3.98
(247 x 196 x 101)
8.25 x 6.25
(210 x 159)
5 lbs
HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005CHQRW
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299 x 249 x 125)
10.25 x 8.25
(260 x 210)
6.5 lbs
HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206CHQRW
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
12.25 x 10.25
(311 x 260)
8.5 lbs
HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406CHQRW
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
14.25 x 12.25
(362 x 311)
11.5 lbs
HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
*HW-J181608CHQRW
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
16.25 x 14.25
(413 x 362)
19.25 lbs
HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
*HW-J201608CHQRW
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
18.25 x 14.25
(463 x 413)
20.25 lbs.
HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: 1816 and 2016 sizes are not 6P Rated.
Construction
• Hot compression molded fiberglass reinforced thermoset polyester
•
Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal
• Full length stainless steel hinge
• 300 Series stainless steel used on all
external hardware
• Rounded edges, minimal protrusions or
exposed pocket area for accumulation of
dust or debris
• Molded-in flange for easy mounting
•
Panel mounting capability for fixed rear panel
• Raised bosses with brass inserts accepting
10-32 screws for optional panel mounting
• Workable material cuts, drills, punches and
saws with ease and accuracy
• Padlock latch (padlock not included)
• Snap catch concept with toggle action
• Scratch and abrasion resistant UVA acrylic
flush bonded window
• Submersible, non-corrosive environmental
design
• Full 180° door opening
•
Non-conductive, impact resistant, UV resistant
• Smooth surface, no color variations, swirls
or color pockets, no voids
• Color: Gray
Listings
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• UL File E64791
• CSA Standard C22.2 File 222873
Types 1, 3, 4x, 6P, 12
• NEMA Standard 250
Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Window flammability: UL94V-0
• Non-flame propagating
DATA SUBJECT TO CHANGE WITHOUT NOTICE
18
JIC Series – Non-Metallic Enclosures
Opaque, Hinged Cover with Quick Release Latches and Window
HW-J100804CHQRW
R
Page 6
DATA SUBJECT TO CHANGE WITHOUT NOTICE
19
JIC Series – Non-Metallic Enclosures
Opaque, Hinged Cover with Quick Release Latches and Window
Dimensions for JIC Series Non-Metal Enclosures
JIC Base* Part
Number
Enclosure Overall Size
HxWxD
Enclosure Inside
Dimensions
AxBxC
Mounting
ExF
J K L M N
Hole
Dia.
HW-J60404*
7.50 x 5.43 x 4.75 (191 x 138 x 121) 5.84 x 3.85 x 4.45 (148 x 98 x 113) 6.75 x 2 (171 x 51)
4
(101)
4.25
(108)
2.25
(57)
0.25
(6)
7.39
(188)
0.31
(8)
HW-J60604*
7.50 x 7.50 x 4.75 (191 x 191 x 121) 5.72 x 5.72 x 4.45 (145 x 145 x 113) 6.75 x 4 (171 x 101)
4
(101)
4.25
(108)
4.25
(108)
0.25
(6)
7.52
(191)
0.31
(8)
HW-J80604*
9.62 x 7.50 x 4.74 (244 x 191 x 121) 7.73 x 5.74 x 4.45 (196 x 146 x 113) 8.88 x 4 (225 x 101)
4
(101)
6.25
(159)
4.25
(108)
0.25
(6)
9.5
(242)
0.31
(8)
HW-J100804*
11.62 x 9.41 x 4.25 (295 x 239 x 108) 9.73 x 7.73 x 3.98 (247 x 196 x 101) 10.75 x 6 (273 x 152)
3.5
(89)
8.25
(209)
6.25
(159)
0.25
(6)
11.35
(288)
0.31
(8)
HW-J100805*
(crowned cover)
11.62 x 9.37 x 5.06 (295 x 238 x 129) 9.73 x 7.73 x 4.83 (247 x 196 x 123) 10.75 x 6 (273 x 152)
4.37
(111)
8.25
(209)
6.25
(159)
0.25
(6)
11.37
(289)
0.31
(8)
HW-J121005*
13.56 x 11.43 x 5.21 (344 x 291 x 132) 11.79 x 9.80 x 4.94 (299 x 249 x 125) 12.75 x 8 (324 x 203)
4.5
(114)
10.25
(260)
8.25
(209)
0.25
(6)
13.41
(341)
0.31
(8)
HW-J141206*
15.50 x 13.50 x 6.25 (394 x 343 x 159) 13.53 x 11.55 x 5.94 (344 x 293 x 151) 14.62 x 10 (371 x 254)
5.37
(137)
12.25
(311)
10.25
(260)
0.25
(6)
15.47
(393)
0.31
(8)
HW-J161406*
17.53 x 15.46 x 6.23 (445 x 393 x 158) 15.63 x 13.60 x 5.94 (397 x 345 x 151) 16.75 x 12 (425 x 305)
5.36
(136)
14.25
(362)
12.25
(311)
0.25
(6)
17.45
(443)
0.31
(8)
HW- J181608*
19.62 x 17.61 x 8.82 (498 x 447 x 224) 17.69 x 15.69 x 8.45 (449 x 399 x 215) 18.88 x 12 (479 x 305)
7.99
(203)
16.25
(413)
14.25
(362)
0.25
(6)
19.61
(498)
0.31
(8)
HW-J201608*
22.00 x 17.68 x 8.83 (559 x 449 x 224) 19.72 x 15.7 x 8.45 (501 x 399 x 215) 21.25 x 10.00 (540 x 254)
8
(203)
18.25
(464)
14.25
(362)
0.25
(6)
21.68
(551)
0.31
(8)
Note: Dimensions in inches (millimeters); letters in table correspond to letters on dimensional drawings.
*Note: Base Part Number denotes enclosure size only. Defining alphabetical characters are represented by an asterisk*(for example: HW-J60604* denotes dimensions for
HW-J60604SC, HW-J60604CHSC, HW-J60604CHQR, HW-JCC60604CHQRW, or HW-J60604CHTLW. Do not use Base Part Numbers to order enclosures. Use only
complete part numbers when ordering.
Loading...