DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
TERMINAL KIT ASSEMBLIES, BLOCKS AND STRIPS
J8
FEATURES-SPECIFICATIONS
TERMINAL KIT ASSEMBLIES,
BLOCKS AND STRIPS FOR
ALL SMALL JIC NEMA 12
AND JIC-NEMA 4 BOXES
• Provides a strong, versatile means for
mounting terminal blocks in Wiegmann
JIC boxes and other enclosures
• Easily installed bracket assembly
accommodates the desired number
of terminal straps or block strips
• Bracket assembly consists of two
white enamel brackets which mount
on weldnuts
• Terminal block strip (ordered separately)
is Buchanan Type MD for wire sizes
No.22 through 10, mounted on a
single terminal strap. Block strips
attach where desired by spring locking
CATALOG DIMENSION
KPN
NUMBER PARALLEL TO BRACKETS
WA0806JTMA 6.00 (152) 1.56 (40) 2.75 (70) 2.63 (67)
WA0808JTMA 8.00 (203) 1.56 (40) 2.75 (70) 4.63 (118)
WA1010JTMA 10.00 (254) 2.81 (71) 4.00 (102) 6.53 (166)
WA1212JTMA 12.00 (305) 2.81 (71) 4.00 (102) 8.53 (217)
WA1614JTMA 14.00 (356) 2.81 (71) 4.00 (102) 10.53 (267)
BRACKET ASSEMBLIES FOR SMALL JIC NEMA 12 AND JIC NEMA 4 ENCLOSURES
CATALOG DIMENSION TERMINAL BLOCKS
USABLE SPACE N
NUMBER PARALLEL TO STRIP PER STRIP #
WA08JB 8.00 (203) 8 4.63 (118)
WA10JB 10.00 (254) 12 6.53 (166)
WA12JB 12.00 (305) 16 8.53 (217)
WA14JB 14.00 (356) 20 10.53 (267)
WA16JB 16.00 (406) 24 12.53 (318)
TERMINAL BLOCK STRIP & STRAP
CATALOG ENCLOSURE DIMENSION
USABLE SPACE N
NUMBER PARALLEL TO STRAP
WA0806JS 8.00 (203) 4.63 (118)
WA0808JS 8.00 (203) 4.63 (118)
WA1008JS 10.00 (254) 6.63 (168)
WA1010JS 10.00 (254) 6.63 (168)
WA1210JS 12.00 (305) 8.63 (219)
WA1212JS 12.00 (305) 8.63 (219)
WA1412JS 14.00 (356) 10.63 (270)
WA1614JS 16.00 (406) 12.63 (321)
TERMINAL STRAPS
NOTE: Terminal blocks are not included. Be sure to order one bracket assembly plus the desired number
of terminal straps for each enclosure.
Terminal Kit Assembly for
Small JIC Enclosures (Series B & BN4)
nuts. Order brackets, terminal straps
and block strips by part number
shown below
How To Order
• Each enclosure requires one bracket
assembly plus the desired number of
terminal straps. The bracket assembly
and the terminal straps must be
ordered separately
• To select the correct terminal strap,
determine whether the terminal straps
will be mounted parallel to the height
or width dimension. Specify the
number of straps desired, checking
usable space for enclosure ordered
• To select the correct bracket assembly,
determine whether the bracket will
be mounted parallel to height or
width dimension of enclosure. Refer
to chart and specify correct bracket
by catalog number. One bracket is
needed for each row of collar studs
parallel to the brackets