Wiegmann ENCLOSURES FREESTANDING ACCESSORIES Catalog Page
ENCLOSURES
FREESTANDING ACCESSORIES
C29
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60P24F1 12 48.00x20.00 (1219x508)
WA60P24F2 12 24.88x20.00 (632x508)
WA72P24F1 12 60.00x20.00 (1524x508)
WA72P24F2 12 30.88x20.00 (784x508)
WA90P24F1 12 78.00x20.00 (1981x508)
WA90P24F2 12 39.88x20.00 (1013x508)
WA72P30F1 12 60.00x26.00 (1524x660)
WA72P30F2 12 30.88x26.00 (784x660)
WA60P36F1 12 48.00x32.00 (1219x813)
WA60P36F2 12 24.88x32.00 (632x813)
WA72P36F1 12 60.00x32.00 (1524x813)
WA72P36F2 12 30.88x32.00 (784x813)
WA90P36F1 12 78.00x32.00 (1981x813)
WA90P36F2 12 39.88x32.00 (1013x813)
REGULAR PANELS ONLY (FULL & HALF) NEMA 12 SINGLE DOOR
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60P48F1 10 48.00x44.00 (1219x1118)
WA60P48F2 10 24.88x44.00 (632x1118)
WA72P48F1 10 60.00x44.00 (1524x1118)
WA72P48F2 10 30.88x44.00 (784x1118)
WA72P60F1 10 60.00x56.00 (1524x1422)
WA72P60F2 10 30.88x56.00 (784x1422)
WA72P72F1 10 60.00x68.00 (1524x1727)
WA72P72F2 10 30.88x68.00 (784x1727)
WA90P48F1 10 78.00x44.00 (1981x1118)
WA90P48F2 10 39.88x44.00 (1013x1118)
WA90P72F1 10 78.00x68.00 (1981x1727)
WA90P72F2 10 39.88x68.00 (1013x1727)
REGULAR PANELS ONLY (FULL & HALF) NEMA 12 TWO DOOR
NOTE: Center Panel support is supplied with a regular Two Door Enclosure
Panel. This support is used only as a brace. It is not intended to be used
as a support for Single Door Panels, relay racks, etc.
FULL PANEL
HALF PANEL
CENTER PANEL
SUPPORT
FULL PANEL
HALF PANEL
DATA SUBJECT TO CHANGE WITHOUT NOTICE
ENCLOSURES
FREESTANDING ACCESSORIES
C30
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SP24F3 12 48.00x19.00 (1219x483)
WA60SP24F4 12 24.88x19.00 (632x483)
WA72SP24F3 12 60.00x19.00 (1524x483)
WA72SP24F4 12 30.88x19.00 (784x483)
WA72SP30F3 12 60.00x25.00 (1524x635)
WA72SP30F4 12 30.88x25.00 (784x635)
WA60SP36F3 12 48.00x31.00 (1219x787)
WA60SP36F4 12 24.88x31.00 (632x787)
WA72SP36F3 12 60.00x31.00 (1524x787)
WA72SP36F4 12 30.88x31.00 (784x787)
WA90SP36F3 12 78.00x31.00 (1981x787)
WA90SP36F4 12 39.88x31.00 (1013x787)
SWING OUT PANELS ONLY (FULL & HALF) NEMA 12 SINGLE DOOR
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG NUMBER STEEL GAUGE PANEL SIZE A X B
WA60SMP14 12 48.00x14.00 (1219x356)
WA72SMP14 12 60.00x14.00 (1524x356)
WA72SMP20 12 60.00x20.00 (1524x508)
WA90SMP14 12 78.00x14.00 (1981x356)
WA90SMP20 12 78.00x20.00 (1981x508)
SIDE MOUNT PANELS FOR SINGLE OR DOUBLE DOORS
CATALOG NUMBER DESCRIPTION
WA60FSCPS Center panel support for 60" high enclosures
WA72FSCPS Center panel support for 72" high enclosures
WA90FSCPS Center panel support for 90" high enclosures
CENTER PANEL SUPPORTS
CATALOG NUMBER DESCRIPTION
WAPS1420CN Clamp nut for unistrut
WAPS3816CN Clamp nut for unistrut
WA1032N Clamp nuts for Type (RA) Relay Rack Angles
CLAMP NUTS
WA60SP24F3
WA60SMP14
DATA SUBJECT TO CHANGE WITHOUT NOTICE
ENCLOSURES
FREESTANDING ACCESSORIES
C31
CATALOG NUMBER STEEL GAUGE LENGTH “L”
WA60RP24F5 10 49.00 (1245)
WA60RP24F6 10 26.25 (667)
WA72RP24F5 10 61.25 (1556)
WA72RP24F6 10 31.50 (800)
WA72RP30F5 10 61.25 (1556)
WA72RP30F6 10 31.50 (800)
WA90RP24F5 10 78.75 (2000)
WA90RP24F6 10 40.25 (1022)
RELAY RACK ANGLES (FULL OR HALF) SINGLE DOOR
CATALOG FITS ENCLOSURE RACK ANGLE
NUMBER H X W SIZE LENGTH “L”
WA60RA19TH
60.00x24.00 19.00 49.00
(1524x610) (483) (1245)
WA72RA19TH
72.00x24.00 19.00 61.25
(1829x610) (483) (1556)
WA72RA24TH
72.00x30.00 24.00 61.25
(1829x762) (610) (1556)
WA90RA19TH
90.00x24.00 19.00 78.78
(2286x610) (483) (2001)
RELAY RACK ANGLES WITH THRU HOLES (TYPE RA)
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
CATALOG FITS ENCLOSURE RACK ANGLE
NUMBER H X W SIZE LENGTH “T”
WA7230S0F19 72.00x30.00 19.00 57.88
(1829x762) (483) (1470)
WA7236S0F19 72.00x36.00 19.00 57.88
(1829x914) (483) (1470)
WA9036S0F19 90.00x36.00 19.00 75.38
(2286x914) (483) (1915)
SWING OUT RACK MOUNTING FRAMES
NOTE: If used in a Two Door Enclosure, a center panel support must be ordered.
WA60RP24F5 WA60RA19TH
WA7230SOF19
DATA SUBJECT TO CHANGE WITHOUT NOTICE
DATA SUBJECT TO CHANGE WITHOUT NOTICE
SWING-OUT PANEL KITS
Designed to allow mounting of switches,
gauges, pilot lights and other components near the front of the enclosure
for easy access or meter reading.
• These kits consist of heavy gauge
brackets and hinges which are easily
installed by drilling small holes in the
sides of the enclosure and bolting
the bracket in place
• Sealing washers are also furnished to
ensure that the enclosure will meet the
original NEMA rating after installation
• These kits are designed for use
with standard Wiegmann JIC
and NEMA panels
GENERAL ENCLOSURE ACCESSORIES
JIC & NEMA SWING-OUT PANEL KITS
J2
FEATURES-SPECIFICATIONS
WAJCDFK
WANADFK
CATALOG NUMBER DESCRIPTION
WAJCDFK JIC Kit
WANADFK NEMA Kit
JIC & NEMA SWING OUT PANEL KITS
NOTE: Panels must be ordered separately.
NEMA Swing-Out Panel Kit
JIC Swing-Out Panel Kit
PANEL
(Order Separately)
CAPTIVE THUMB
SCREW
FIXED
BRACKET
1.31 MIN.
0.69
1.34
0.81
1.25
HINGE
BRACKET
PANEL (Order Separately)
SECTION Y-Y
VIEW WITH
COVER REMOVED
4.00
Y
X
Y
X
VIEW WITH
COVER REMOVED
SECTION X-X
PANEL
(Order Separately)
1.06
1.06
1.25 MIN.
PANEL (Order Separately)
CAPTIVE THUMB
SCREW
FIXED BRACKET
HINGE
BRACKET
2.31
2.38
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
PRINT POCKET • DOOR STOP KIT • FOLDING SHELF
J3
FEATURES-SPECIFICATIONS
CATALOG NUMBER DESCRIPTION
WADSTOPK Door stop kit
DOOR STOP KIT
CATALOG NUMBER DESCRIPTION
WACSHELF12 12.00x12.00 (305x305)
WACSHELF18 18.00x18.00 (457x457)
FOLDING SHELF
WACSHELF12
Folding Shelf
WADSTOPK
Door Stop Kit
PRINT POCKET
• Plastic print pockets can be placed
anywhere within enclosure via 2-way
adhesive tape flanges
• White in color
DOOR STOP KIT
• Designed for use on most standard
Wiegmann Type 4 and 12 enclosures
to secure the door in the open
position
• Door stop can be mounted at the
top or bottom of the door opening
after drilling two small holes in the
body of the enclosure and two small
holes in the door. The angle of the
door is easily adjusted and the stop
arm slides neatly out of the way
when the door is closed
• All parts are plated
FOLDING SHELF
• Designed to be used to support and
test equipment that is used to install
and maintain electrical components
in an enclosure
• The shelf can be installed on the
inside or outside
surface of the Wiegmann enclosures
• When not in use, the shelf folds
down and projects only one inch
• All parts are made of heavy gauge
steel
• ANSI-61 gray polyester powder paint
finish
WAPPL0606
Print Pocket
CATALOG NUMBER DESCRIPTION
WAPPL0606 6x6
WAPPL0810 8x10
PRINT POCKET
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
DRIP SHIELDS • HOLE SEALS
J4
FEATURES-SPECIFICATIONS
DRIP SHIELDS
• Designed to protect door hardware from dripping
water and settling dust
• Drip shields attach easily to the enclosure with stainless
steel screws, gasket and sealing washers (hardware
is furnished)
• Drip shields fit all single door NEMA 12 and NEMA 4
wall mounted enclosures
• Stainless steel door clamps are furnished to replace the
standard door clamps
• Steel drip shields have a ANSI 61 gray polyester powder
finish over phosphatized surfaces
• Stainless steel drip shields have a grained finish
• 42", 48", 60" and 72" drip shields fit floor mounted
double door enclosures. Specify when ordering for
double door wall mounted enclosures
CATALOG NUMBER
GAUGE
FITS ENCLOSURE
STEEL STAINLESS STEEL
WIDTH
DK12 SSDK12 14 12.00 (305)
DK16 SSDK16 14 16.00 (406)
DK20 SSDK20 14 20.00 (508)
DK24 SSDK24 14 24.00 (610)
DK30 SSDK30 14 30.00 (762)
DK36 SSDK36 14 36.00 (914)
DK42 — 14 42.00 (1067)
DK48 — 14 48.00 (1219)
DK60 — 14 60.00 (1524)
DK72 — 14 72.00 (1829)
DRIP SHIELDS
Drip Shields
HOLE SEALS
Designed to seal extra push-button holes, conduit
openings, and knockout openings from dirt, dust,
oil and water
Steel:
• Quick wing nut
• Oil resistant gasket
• ANSI 61 gray polyester powder
Stainless Steel:
• Quick wing nut
• Oil resistant gasket
• Grained finish
CATALOG NUMBER
DESCRIPTION
HOLE
STEEL STAINLESS STEEL
DIAMETER
WASPBG WASPBGSS
Miniature oil tight
pushbutton holes
0.88 (22)
WAS050 WAS050SS 1/2-inch conduit holes 0.88 (22)
WAS075 WAS075SS 3/4-inch conduit holes 1.13 (29)
WASPB WASPBSS
Standard oil-tight
pushbutton holes
1.20 (30)
WAS100 WAS100SS 1-inch conduit holes 1.38 (35)
WAS125 WAS125SS 1 1/4-inch conduit holes 1.63 (41)
WAS150 WAS150SS 1 1/2-inch conduit holes 2.00 (51)
WAS200 WAS200SS 2-inch conduit holes 2.50 (64)
WAS250 — 2 1/2-inch conduit holes 3.00 (76)
WAS300 — 3-inch conduit holes 3.63 (92)
WAS350 — 3 1/2-inch conduit holes 4.00 (102)
WAS400 — 4-inch conduit holes 4.63 (118)
HOLE SEALS
Hole Seals
DATA SUBJECT TO CHANGE WITHOUT NOTICE
GENERAL ENCLOSURE ACCESSORIES
WINDOW KITS
J5
FEATURES-SPECIFICATIONS
WINDOW KITS
• Steel window kits are designed
to be used indoors on NEMA 12
enclosures
• Stainless steel window kits are
suitable for NEMA 12 and 13
enclosures in an indoor application.
These kits are easily installed by
making a cutout in the enclosure
and attaching the window and frame
in place. All necessary hardware
is included
• Kits are fully gasketed to maintain
an oil tight seal
• Frames are made from heavy steel
with a ANSI 61 gray polyester
powder finish over phosphatized
surfaces. Type 304 stainless steel
with a grained finish
CATALOG NUMBER
WINDOW FRAME REQUIRED
STEEL STAINLESS STEEL
H X W SIZE CUT-OUT SIZE
WAPWK0503NF WAPWK0503SS
5.00x3.00 7.50x5.50 6.69x4.69
(127x76) (191x140) (170x119)
WAPWK0905NF WAPWK0905SS
9.00x5.50 11.50x8.00 10.69x7.19
(229x140) (292x203) (272x183)
WAPWK1308NF WAPWK1308SS
13.00x8.00 15.50x10.50 14.69x9.69
(330x203) (394x267) (373x170)
WAPWK1705NF —
17.00x5.50 19.50x8.00 18.69x7.19
(432x140) (495x203) (475x183)
WAPWK1711NF WAPWK1711SS
17.00x11.00 19.50x13.50 18.69x12.69
(432x279) (495x343) (475x322)
WAPWK2315NF WAPWK2315SS
23.00x15.00 25.50x17.50 24.69x16.69
(584x381) (648x445) (627x424)
WAPWK2919NF —
29.00x19.00 31.50x21.50 30.69x20.69
(737x483) (800x546) (780x526)
WAPWK3523NF —
35.00x23.00 37.50x25.50 36.69x24.69
(889x584) (953x648) (932x627)
WINDOW KITS
WAPWK0503NF WAPWK0503SS
Enclosure
Cut-out
Mounting
Surface
Closed-Cell
Gasketing
W + 2.50
W + 1.69
H + 2.50
H + 1.69
0.31
W
H
Loading...