Wiedamark LPL-6, LPL-6-18P, LPL-6-36P Instructions Manual
Page 1 / 4
Model No.
LED Color
LED
Quantity
Power
Consumption
Beam
Angle
Size
Weight
√
LPL-6-18P
R, G, B
18
23 WATTS
o o o
10 /20 /45
Ø 170xH180mm
2.6kg±5%
LPL-6-36P
R, G, B
36
45 WATTS
o o o
10 /20 /45
Ø 210xH190mm
4.4kg±5%
LED POOL LIGHT
ITEM NO.:
LPL-6 Series
ITEM NO.:
INSTRUCTION OF LED POOL LIGHT/LPL
This product is mainly used for swimming pool,underwater fixture.With friendly and
convenient operation,it can offer magic effects in water and ground.
A. Specification
A-1. Stru cture
Materials of Shell: Aluminum alloy/6063
Rotary angle: 150°
Input Voltage: 24V DC
Protecting Rating: IP68
Operating Temperature： -20℃~40℃
LPL- 6-18P LPL- 6-36P
A-1. Mode l Configur ation Table
B. Working mode
B-1. DMX512 mode (signal from DMX console)
B-2. Built-in mode
B-3. Master/Slave mode Mode(Master=001,Slave≠001)
C. Function & Setup
C-1.DMX Channel instruction-3 Channels available as sheet:
CHANNEL 1 CHANNEL 2 CHANNEL 3
Data Function Data Function Data Function
0~255 0~255
***Enter or quit DMX mode automatically once detecting valid signal!!!
Brightness of Red
C-2. DMX Address Setting
Press the MODE button to the interface as Figure 3, the address(A,B,C,D,E,F )display on the LCD screen
are corresponding to the output port on the controller (1 # 2 # 3 # 4 # 5 # 6 # ).Press SET button to choose
different output port;Press the UP and Down button to the desired address,each port can set as digits less
than 512.
MODE SET
Brightness of Green Brightness of Blue
A002
D011
B005
E014
UP
0~255
C008
F017
DOWN
1# 2# 3# 4# 6#5#
Page 1 / 4
LED POOL LIGHT
C-3 .Program Menu
00 BlackOut
01 Static Red
Brightness:255
02 Static Green
Brightness:255
03 Static Yellow
Brightness:255
04 Static Blue
Brightness:255
05 Static Purple
Brightness:255
06 Static Cyan
Brightness:255
07 Static White
Brightness:255
08 Dimmer
R255 G255 B255
09 Color change
Speed: 100
Speed/Brightness/Cycle can be
adjusted with each function!
***Speed range: 0~100(fastest)
***Brightness range: 0~255(brightest)
***Cycle range: 1~16
MODE
Welcome To Use
CTR-RGB-BOX V2.0
29 Pingpong
Setup
UP or DOWN
10 Color Flash
Speed: 100
11 Red Fade
Speed: 100
12 Green Fade
Speed: 100
13 Yellow Fade
Speed: 100
14 Blue Fade
Speed: 100
15 Purple Fade
Speed: 100
16 Cyan Fade
Speed: 100
17 White Fade
Speed: 100
18 Color Fade1
Speed: 100
19 Color Fade2
Speed: 100
ITEM NO.:
20 Left Flow
Speed: 100
21 Right Flow
Speed: 100
22 Bidir-Flow
Speed: 100
23 Side->Middle
Speed: 100
24 Middle->Side
Speed: 100
25 Side<->Middle
Speed: 100
26 Left Stack
Speed: 100
27 Right Stack
Speed: 100
28 Bidir-Stack
Speed: 100
29 Pingpong
Speed: 100
ITEM NO.:
LPL-6 Series
30 Rainbow Left
Speed: 100
31 Rainbow Right
Speed: 100
32 AutoRun Mode
Cycle: 16
System Setting
DMX Address # x
System Time Set
2001-00-01 18:43
D.Photometrics
D-1. Cadela distribution
LPL- 6-36P-240 V-W-15°
ON ---> OFF
18:14--->23:04
Setup
Setup
Setup
Quantity: Define the quantity loaded by controller
Start Addr: Define the starting DMX address of the 1st fixture
YEAR-2001
MONTH-00
DAY-01
HOUR-18
MINUTE-43
On-Controller start to work
OFF-Controller stop to work
Use 【UP】or 【DOWN】to adjust all active parameters!
DMX address of 1#~6# fixtures is not required to be of serial,
under built-in programs/functions.
LPL- 6-36P-240 V-W-45°
LPL- 6-36P-240 V-WW-15° LPL- 6-36P-240 V-WW-45°
D-2.Illuminance at a distance
Loading...