Wiedamark ColorSpot HP 36x1W RGB LEDs, ETL Listed User Manual

ColorSpot HP 36x1W RGB LEDs, ETL Listed

is indoor or outdoor, full-color capable LED xture can
project light up up 50’, depending on beam angle. It is frequently
used for decorative illumination of architecture, column and tree
up lighting and anywhere you desire a strong “pop” of color.

Integrated DMX controls and settings can be accessed from the
end-mounted 4-button control panel with display. e unit can
also be operated completely independently without any need for
external controllers or additional wiring by activating any of the
on board pre programmed eects.

Specication

• Size: 8.2”

• Weight: 7 lbs

• 36 1 Watt LED’s

• Material of Shell: Aluminum alloy

• Rotary angle: 150 ° (vertical) & 60 ° (horizontal)

• Input Voltage: 100V~256V AC

• Protection Rating: IP65

• Operating Temperature: -20º C ~40º C

• Operating Voltage: 12V DC or 24V DC(for power LED)

• ETL Rated

FUNCTIONS SECTIONS INDEX:

1. Preprogrammed Operation. Select program, adjust color

and speed options using buttons and display located on end of
xture.

2. DMX Operation. Use buttons and display to assign DMX
address. Connect to DMX controller via the 3-pin IP68 threaded
connector.

3. Master/Slave Mode. Synchronize multiple units by intercon­necting with IP68 threaded DMX cabling and assigning one unit
as “Master” and other units as “Slave” via the buttons and display
on the end of the xture.

Wiedamark.com | 4016 Harry Hines Blvd, Dallas, Texas 75219 | 800.893.9787

ColorSpot HP 36x1W RGB LEDs, ETL Listed

FUNCTION SELECTION:

1. Preprogrammed Operation

1. Press button “B” to enter the preprogrammed operation.

2. ree characters will appear on the display: e letter “P”
with 2 digits to the right of it.

3. e digit in the middle (X) can be selected by pressing the
“A” button and can be changed by pressing the “B” button.

BA

4. e middle digit has a range of values that are: A, B, C, 1,
2, 3 , 4, 5, 6, 7, 8 and 9. e character selected for this middle
digit determines the program.

5. e last digit (Y) has a range of numeric values from 1 to 9.
e character selected for the last digit determines the speed
or rate for the program: 1 is slowest while 9 is the fastest.

6. About 10 seconds aer the last button is depressed, the

YX

display will accept your change and store it in memory.

X Value Y Value
1- Static Red 1~9 Intensity
2- Static Green 1~9 Intensity
3- Static Yellow 1~9 Intensity
4- Static Blue 1~9 Intensity
5- Static Purple 1~9 Intensity
6- Static Cyan 1~9 Intensity
7- Static White 1~9 Intensity

8- Multicolor Changing 1~9 Speed
9- Single Fading 1~9 Speed
A- Multicolor Fading 1~9 Speed
B- Multicolor Flashing 1~9 Speed
C- Auto Run 1~9 Times Cycle

Wiedamark.com | 4016 Harry Hines Blvd, Dallas, Texas 75219 | 800.893.9787