WiebeTech TCS1-1, TCS2-0 Quick Start Manual

Page 1
Quick Start Guide
Tera Card TCS1-1 and TCS2-0 SATA hosts
Features
32 bit, 33/66MHz fully compliant PCI host interface
Two brackets to support low profile PCI and regular
LBA supports smaller drives as well as drives larger than 137GB
Supports Spread Spectrum in receiver
Supports two independent SATA channels
TCS1-1
Compliant with PCI Specification, revision 2.2
Operating Systems: Mac OS X, Windows XP
Package contents
PCI card
Extra bracket for use with low profile computer cases.
CD containing user’s manual, warranty information, and drivers
Installatio
W
Browse to the folder “TCS1-
lashrom.command” file.
“F
When you launch the file, a terminal window will open and prompt you to “enter C to con Press “C” on your keyboard and hit enter. The terminal window will now look like this:
n
1. Power down the computer syst
2. Open the computer case.
3.
Insert the PCI board into an available 32-bit or 64-bit PCI or PCI-X slot. Do not force it, but it will take firm pressure to insert the card. Make sure the card is ful slot. Note: the card is not compatible wi
4. Secure the card in place w
5. Power up the computer.
6. Follow the instructions for your computer type to install firmware/drivers.
indows driver Installation
1. Browse to the folder “TCS1-1, TCS2-0 Windows
2. Follow the instructions in the “readme.txt” file.
stalling firmware for Mac Usage
In
1, TCS2-0 Mac Firmware” on the CD. Open the
em. Unplug the power cable.
th PCI Express (PCI-e) slots.
ith a screw.
Drivers” on the CD.
ly seated in the
tinue”.
Page 2
This screen presents you with three options:
Option (A) allows you to set the card to work with the Mac.
Option (B) resets the card to work with a Windows PC.
Option (C) is self explanatory.
Choose option (A) to set the card to work with your Mac. After prompting you for your administrator password, it will upload the firmware to the card.
As indicated by the terminal, you will have to restart your computer for the card to function.
Loading...