Wido ICE2 Instruction Manual
- 1 -
INSTRUCTION MANUAL
ICE MAKER
ICE2
Thanks for your choosing our ICE MAKER
Please read this Instruction Manual carefully before operation
Please keep it in a safe place and refer to it when necessary.
- 2 -
Description
1. Top Lid
7. Icefull sensor
2. Control panel
8. Fan cover
3. Sliding door
9. Water out
4. Ice storage tank
10. Water inlet
5. Fan
11.Power cord
6. Evaporator
Specifications
Model
ZB-250
Ice Making Capacity
40kgs
Ice Sizes
adjustable
Ice Storage Capacity
10kgs
Dimension
457*432*744
Voltage
AC 220-240V/50Hz
Power cord
3 pins grounded plug. (to reduce risk of electric shock)
Spare Parts
No.
Description
Picture
Quantity
1
Filter Bracket
option
2
Anti-drain Plug
1
3
Filter Connector
option
- 3 -
4
Adaptor 1
5
Water Follow
Controller
1
6
Filling Water
Pipe(1m)
1
7
Filling Water
Pipe(40cm)
1
8
Ice Scoop 1
9
Filter Bracket
2
Function
Instant making ice
Ice full alarming,add water water alarming
Crystalline ice in square
Before/First Use of Your Ice Maker
1.During transportation, the incline angle of the cabinet should not be over 45° .Do not turn the
Ice maker upside down. As this may damage the compressor and sealed system.
2.Remove all packing material and carefully check your ice maker to ensure it is in good
condition and that there is no damage to the ice maker or power cord and plug.
3The ice maker should be placed horizontally on a level surface.To ensure proper ventilation for
your ice maker allow 150mm of space at the top, the back and on each side. Do not install
the Ice maker near an oven, radiator, or any other heat source.
4.Before using the Ice maker for the first time, please wait 2 hours after positioning it, and keep
the front lid open for at least 2hours
5.Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
6.Pure water is not allowed to be used on this unit, spring water is recommended.
Control Panel Operation
Loading...