Wi Digital Systems AudioStream Pro Quick Start User Manual

QUICK START USER GUIDE

Wi AudioStream Pro

TM

www.widigitalsystems.com

Charging

1. Plug the AC Charger into a power socket.

2. Connect the USB Y-Split power cable to

the USB port on the AC Charger.

3. Connect one of the two mini USB connectors

into the transmitter USB port.

4. Connect the second mini USB connector into

the receiver USB port.

5. The Power/Status LED will turn to solid

Red ON.

6. When charging is complete the Red LED

will turn OFF.

7. Remove the charging cable and the AC

Charger and store in the carrying case.
The battery will last 4 to 6 hours of
continuous operation.

POWER

LINK

Mini USB

Connector

USB Port

AC Charger

USB Port

USB Connector

Pairing (Only If Needed)

1. First turn ON the transmitter (Tx) and the

receiver (Rx) units by pressing and
holding the POWER button , on each
of the units for 2 seconds.

2. Press and hold the LINK button on the

transmitter (Tx) for 3 seconds. The Power/
Status LED on the transmitter will start fast
ashing. The transmitter is now in a Pairing
mode and ready to search for the receiver.

3. Press and hold the LINK button on the

receiver (Rx) for 3 seconds. The Power/
Status LED on the receiver will start fast

ashing. The receiver is now in a Pairing

mode and ready to be found by the
transmitter.

4. Once the transmitter links with the receiver

the Power/Status LED on both devices will
turn to solid Green.

p

k

z

v

(Tx)

p

k

z

v

(Rx)

r