Wi Digital Systems AudioStream User Manual

USER GUIDEJM-WAL45

STEREO

DIGITAL WIRELES

TM

Wi AudioStream

TM

Digital Wireless Mini Mic & Audio Monitoring System

TM

Wi AudioStream

CONGRATULATIONS

CONGRATULATIONS!

Thank You For Choosing Jangus Music!

Congratulations on your purchase of the Wi AudioStream Digital Wireless Mini Mic & Audio Monitoring System.

In this manual you’ll nd information designed to help you understand the capability of your

Wi AudioStream, as well as step-by-step explanation on how to install and operate your

Wi AudioStream digital wireless Mini Mic and audio monitoring System.

Wi AudioStream

TECHNICAL SUPPORT

Getting Answers!

We want you to get the most from your new Wi AudioStream digital wireless mini Mic and audio monitoring system!
Simply logon to www.jangusmusic.com and access the powerful resources available online including
instructional manuals and frequently asked questions.

Our customer service staff is ready to assist you with any question you may have.
Your Wi AudioStream comes with 90 days of telephone support and one year of service coverage.

There are may ways to contact Jangus Music customer service support.

E-Mail: [e-mail]

Website: http://www.jangusmusic.com/support

Technical support: [phone] (87 7- JA NG US i)

3

Wi AudioStream

INTRODUCTION

Making Great Instruments Better!

Jangus Music’s Wi AudioStream world class, linear stereo digital wireless audio solution is the smallest,

most advanced cable replacement technology available today that can t in the palm of your hand! This

Patents-Pending plug-and-play stereo digital wireless audio solution provides an easy and user friendly way
to connect any professional mini condenser microphones or analog audio device to remote and hard to reach
audio equipment.

Automatic, No Hassle Setup!

Simply connect the ultra compact sized transmitter to the audio output jacks on the musical instrument and then connect

the ultra compact sized receiver to the mixer, amplier, headphones, in-ear monitors or computer audio input jacks and you

are done!... No knobs to tweak... No antennas to adjust.

Live and Studio Performance!

This full function 2.4GHz point-to-point digital wireless stereo audio solution provides more than 100 feet of secure,
simultaneous un-compressed 16bit rate at 48kHz CD quality wireless audio connectivity. This high-quality solution operates
without radio frequency (RF) interference inherent in UHF/VHF systems, signal loss, crackle or AC hum, making it the best
digital wireless solution for live performances, personal monitoring and studio recording environments.

4

Wi AudioStream

INTRODUCTION

Crisp Highs and Thundering Low Tones!

The Wi AudioStream’s 15Hz to 20kHz frequency response covers the full harmonic spectrum of musical instruments
including Keyboards, Singing Voices, Woodwinds, Brass, Percussion and Strings; and delivers crisp highs and
thundering low tones that will satisfy the most demanding musicians.

Meeting The Specs!

The Wi AudioStream transmitter’s small and rugged design boasts three (3) different power up modes to support
Line-in (Stereo), Mic-in (Stereo), Mic-in (Mono) connection. Each of the power up modes is congured to apply the
appropriate input impedance and input voltage level to best match the electrical characteristics of the device

connected to the transmitter.

In-Ear Monitoring!

The Wi AudioStream provides the freedom of wireless movement to any in-ear monitor application from musicians
to houses of worship to installations requiring assistive listening devices.

5

Wi AudioStream

INTRODUCTION

Extreme Flexibility!

The Wi AudioStream power source’s exible design boasts
an internal rechargeable battery for 4~6 hours of battery
operation. The optional ON-THE-GO AA battery power adapter
provides for 10~13 hours of extended battery operations and

the AC power adapter provides continuous operation, so there’s
no need to power down the Wi AudioStream for recharging or

swapping the AA batteries on the optional ON-THE-GO battery
power booster. The JM-WAL45 transmitter and receiver can
also be powered by USB bus power when connected to any
USB host equipped device for continuous power operation you

can count on.

2.5mm Mono

2.5mm Stereo

3.5mm Mono

3.5mm Stereo

6.3mm TSR Mono

6.3mm TSR Stereo

XLR Unbalanced

RCA

3.5mm Stereo

USB

Bus Power

AA Battery

Power Booster

Charger

Fast and Easy Setup!

The Wi AudioStream is the rst digital wireless system ever to combine all the features required for professional
mini microphone and in-ear monitoring applications in an ultra small, rugged, light-weight design. This combination
of audio performance, simplied setup and portability lets you set up quickly and easily! No extra gear to haul, No
bulky devices to carry, No heavy cables to hoist or route and No tangle of speaker cables.

6

Creating Your Audio Matrix!

Jangus Music’s audio routing feature allows users
to send the audio output from their instrument to up
to eight (8) different digital wireless receivers with

a simple press of the Link button. You can send the

audio signal to other receivers as well as the Jangus
Music’s JM-WHM01 digital wireless headphone. No

more removing, swapping or disconnecting cables

Computer

Rx 5

Digital Recorder

Mixer

Rx 4

Rx 6

INTRODUCTION

Rx 3

Tx 1

Compressor/Limiter/

Amplier

Rx 7

Wi AudioStream

Headphone

Rx 2

In-ear Monitor

Rx 1

Gate/FX

Rx 8

7

Wi AudioStream

www .ja ngu smu sic .co m

PACKING LIST

What is included in the package?

Verify that you have received all of the items listed below.
Please visit our web site at www.jangusmusic.com for additional accessories.

Wi Transmitter Wi Receiver Universal AC Charger

(QTY 1) 1/4” Mono Male to

1/8” Stereo Male Cable

USB Y-Split Power Cable

(QTY 1) 1/4” Stereo Male to

1/8” Stereo Male Y-split Cable

User Manual

8

Carrying Bag

Wi Transmitter

1. Audio IN Jack

2. Power ON/OFF

3. Power/Status LED

4. Volume UP

5. Volume Down

6. Mute

7. Link/Pairing

8. Sleep

9. Operation Mode

10. USB Charging Port

11. Belt Clip

j
r
o
n
q
p
l

m

k

Wi Receiver

1. Audio OUT Jack

2. Power ON/OFF

3. Power/Status LED

4. Volume UP

11

5. Volume Down

6. Link/VoIP

7. Next Track

8. Previous Track

9. Mute/ Play/Pause

s

10. (VoIP) Microphone

11. USB Charging Port

12. Belt Clip

Wi AudioStream

ABOUT YOUR JM-WAL45

u

x

v

~

12

11

|
}
y
{
z
w

9

Wi AudioStream

TRANSMITTER FEATURES

Transmitter Controls and Connections

j Audio IN Jack: Provides a stereo connection for professional musical instruments and more...
k Power ON/OFF: Press and hold the Power button for 2 seconds to turn the transmitter ON or OFF.
l Power/Status LED: The Power/Status LED displays the status of six functions, ON/OFF, Battery

Charging, Low Battery, Pairing, Mute, Operations and Sleep mode.
F

m Volume UP: Press and hold the Volume UP to automatically increase the volume level.

Press the Volume UP once to increase the volume level one step at a time.

n Volume DOWN: Press and hold the Volume DOWN to automatically decrease the volume level.

Press the Volume DOWN once to decrease the volume level one step at a time.

10

Please refer to the “Tx Button Function Matrix” section of this manual for more details

Wi AudioStream

TRANSMITTER FEATURES

o Mute: Press and hold the Mute button for 1.5 seconds to mute or unmute the audio.
p Link/Pair: The Link button performs two functions: Pairing and Linking.

The Pairing function allows the transmitter to connect to up to 8 eight different

receivers to create your own wireless audio matrix. Press and hold the Link
button for 3 seconds until the Green LED display fast ashes.

The Link function allows the transmitter to reroute the audio signal connection
from the instrument to up to 8 eight different receivers previously paired with the
transmitter. Press the Link button once and the transmitter will reroute the wire

less connection to the next receiver.

11

Wi AudioStream

TRANSMITTER FEATURES

q Sleep: The Sleep function button on the transmitter is designed to prolong the battery

life operation of the transmitter by 50% as well as the receiver battery
life by 35% when not in use. When the Sleep function on the transmitter is

activated, the transmitter sends a signal to the linked receiver to go into a

standby mode while switching to full sleep mode. The Sleep mode preserves
the audio level settings on both units as well as the communications link
between the transmitter and the linked receiver.

Press and hold the Sleep button for 2 seconds to switch the transmitter and
the receiver into standby power save mode.

Press the Sleep button once to wake-up the transmitter and the receiver.

12

Wi AudioStream

TRANSMITTER FEATURES

r Mode: The Mode multifunction button allows the user to choose between three different

power up modes to support Stereo Miniature Condenser Microphones, Mono
Miniature Condenser Microphones and Stereo Line-in to the transmitter. To select

the desired operations mode, press and hold the Mode button for 2 seconds until
the blue LED change its ashing sequence, then release. To cycle between the
three modes, simply press and hold the Mode button and the transmitter will cycle
between the three modes along with the Blue LED ashing sequences for each of
the modes. Release the mode button once the desired mode setting is reached.

F

s Charging Port: The transmitter uses a mini USB connection to power up and charge the internal

batteries. The transmitter can be charged using the supplied universal AC charger,
via an instrument’s built-in USB port or the optional AA battery power booster USB

adapter.

11

Belt Clip: The transmitter can be attached to belts, shirts and pants pockets. The rigid, small
sized light, weight design is easy to wear without impeding your body movement.

Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions .

13

Wi AudioStream

RECEIVER FEATURES

Receiver Controls and Connections

u Audio OUT Jack: Provides a stereo connection for professional Sound Systems, Monitors, Mixers,

Samplers, In-Ear Monitors, Headphones and more...

v Power ON/OFF: Press and hold the Power button for 2 seconds to turn the transmitter ON or OFF
w Power/Status LED: The Power/Status LED displays the status of six functions, ON/OFF, Battery

Charging, Low Battery, Pairing, Mute and Sleep mode.
F

x Volume UP: Press and hold the Volume UP for auto increments of the volume level

Press the Volume UP once for step increments of the volume level

y Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level

Press the Volume DOWN button once for step increments of the volume level

14

Please refer to the “Rx LED” Indicator Chart” section of this manual for more details

Wi AudioStream

RECEIVER FEATURES

z Link/VoIP: This multifunction button performs the Pairing and VoIP MIC activation.

The VoIP function is covered in the VoIP Microphone section on page 17.
The Pairing function allows the receiver to be discovered by the transmitter
Press and hold the Link button for 3 seconds until the Green LED display fast
ashes.

F

{ Next Track: The Next Track function button is used with the optional Jangus Music PC/MAC

USB transmitter to remotely control jumping to the next track for media players or

sequencing software.

Press the Next Track button once to jump to the next audio track.

Please refer to the “Rx Button Function Matrix” section of this manual for detailed instructions

15

Wi AudioStream

RECEIVER FEATURES

| Previous Track: The Previous Track function button is used with the optional Jangus Music PC/MAC

USB transmitter to remotely control jumping to the previous track for media players or

sequencing software.

Press the Previous Track button once to jump to the next audio track.

} Mute/Pause/Play: Press and hold the Mute/Pause/Play button for 1.5 seconds to mute/un-mute audio.

When the receiver is used with the optional Jangus Music Wi PC/MAC USB
transmitter, the Mute/Pause/Play function will remotely control the media player or

sequencing software to mute, pause or play the audio track.

Press the Mute/Pause/Play button once to pause or play the audio track.

Press and hold the Mute/Pause/Play button for 1.5 seconds to mute/un-mute audio.

16

Wi AudioStream

RECEIVER FEATURES

~ VoIP Microphone: The microphone on the receiver is used with the optional Jangus Music PC/MAC

USB transmitter for Voice over Internet Protocol (VoIP) communications.
This powerful feature allow musicians to collaborate with each other over the internet.

F

To activate the VoIP Microphone on the receiver, press the LINK / VoIP
button once. The Blue LED on the reviver will turn ON when the VoIP MIC is
activated. The VoIP MIC is now ready for use on your PC or MAC with the optional
Jangus Music USB transmitter.

Charging Port: The receiver uses a mini USB connection to power up and charge the internal

11

batteries. The receiver can be charged using the supplied universal AC charger, via
the instrument’s built-in USB host port or the optional AA battery power booster USB

adapter.

Belt Clip: The receiver can be attached to belts, shirts and pants pockets when used with

12

in-ear professional personal monitors. The rigid, small sized, light weight design is

easy to wear without impeding your body movement.

Please refer to the “Function Matrix Table” section of this manual for more details

17

POWER

LINK

Wi AudioStream

GETTING STARTED

Ready, Charge, Go!

Before using your new Wi AudioStream digital wireless system, you need to
fully charge the batteries for approximately 2 hours.

Charging

1. Plug the AC Charger into a power socket.

2. Connect the USB Y-Split power cable to the USB port on the AC charger.

3. Connect one of the two mini USB connectors into the transmitter USB port.

4. Connect the second mini USB connector to the receiver USB port.

5. The Power/Status LED will turn to solid Red ON.

6. When charging is complete the Red LED will turn OFF.

7. Remove the charging cable and adapter and store in the carrying case.

The battery will last 4 to 6 hours of continuous operation.

18

AC Charger

USB Connector

USB Port

USB Port

Mini USB

Connector

Wi AudioStream

PARING

Pairing the Wi AudioStream!

Before using the Wi AudioStream with your instruments, you need to pair the transmitter with the receiver.
Pairing will create a connection between the transmitter and the receiver.

1. First turn ON the transmitter (Tx) and the receiver (Rx) by pressing and

holding the POWER button , on each of the units for 2 seconds.

2. Press and hold the LINK button on the transmitter (Tx) for 3 seconds.

The Power/Status LED on the transmitter will start ashing. The transmitter
is now in a Pairing mode and ready to search for receivers.

3. Press and hold the LINK button on the receiver (Rx) for 3 seconds.

The Power/Status LED on the receiver will start ashing. The receiver
is now in a Pairing mode and ready to be found by the transmitter.

4. Once the transmitter pairs with receiver, the Power/Status LED on both

devices will turn to solid Green.

5. The Wi AudioStream transmitter and receiver are now ready for use.

k

p

z

v

p

k

(Tx)

z

(Rx)

v

19

Wi AudioStream

TRANSMITTER CONNECTION

Connecting Miniature & Lavalier Microphones to Transmitter!

The Wi AudioStream transmitter support Mono and Stereo miniature,

subminiature and lavalier condenser microphones connection.

1. First locate your Ear/Head-worn Microphones or the Mono/Stereo

miniature, lavalier microphones you wish to connect to the transmitter.

2. Connect the 1/8” stereo male end of the MIC cable into

the “Audio Input” jack on the transmitter.

3. Route the audio cable beneath the belt clip as shown to

prevent accidental disconnection of the cable.

4. Place your Ear/Head-worn microphone on your ear or attach the Mono/Stereo

miniature/lavalier microphones to your shirt, electric acoustic guitar, stringed,
woodwinds, brass or other acoustic instruments.

5. Verify if you are connecting a Mono or Stereo microphone to the transmitter.

20

Audio Input Jack

Stereo Microphones

Audio Cable

Belt Clip

TRANSMITTER CONNECTION

5.1 For Stereo MIC Connection

a. Power up the transmitter by pressing and holding the POWER button for 2 seconds.

b. Press and hold the Mode button for 2 seconds. The Blue LED will display slow ashes

F

indic ates the transmitter is searching for the receiver. The ashing Green LED on the transmitter
will turn to solid green once the receiver is powered up, paired and linked with the transmitter.

F

The transmitter can remember the last power up mode selected .To change the startup mode to the
desired operation mode please refer to the “Tx Function Matrix” of this manual for detailed instructions.

5.2 For Mono MIC Connection

a. Power up the transmitter by pressing and holding the POWER button for 2 seconds.
b. Press and hold the Mode button until the Blue LED displays fast ashes
F

indicates the transmitter is searching for the receiver . The ashing Green LED on the transmitter
will turn to solid green once the receiver is powered up, paired and inked with the transmitter.

6. Attach the Wi AudioStream transmitter to your belt.

F

The slow ashing blue LED indicates stereo MIC connection mode and the ashing Green LED

The standard factory power up setting is set for stereo Line-in with two ashing Blue LED ashes.

The fast ashing Blue LED indicates Mono MIC connection mode and the ashing Green LED

Please proceed to page 22 for receiver connection instructions.

r

r

k

k

Wi AudioStream

r

k

(Tx)

21

Wi AudioStream

RECEIVER CONNECTION

Connecting Analog and Digital Devices to Your Receiver!

The Wi AudioStream receiver supports connections to analog and digital device such as Mixers, Ampliers,
Sound Systems, Speaker, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, DJ gear, and more...

Please note connections must be made with the power turned off. Please be aware that
careless operation may damage your speaker system or cause malfunctions.

If you’ve connected a stereo audio amp, be aware that playing at high volume may

damage your speaker system. Be careful not to raise the volume excessively.

1. For a (Mono) connection locate the 1/4” mono to 1/8” stereo cable.

For a (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable.

2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack

on the transmitter.

22

Audio Output

Jack

1/4” Stereo Y-Split to 1/8’

Stereo Cable

Wi AudioStream

POWER

LINK/VoIP

RECEIVER CONNECTION

3. Route the audio cable beneath the belt clip as shown to prevent

accidental disconnection of cable.

4. Connect the 1/4” male end of the cable to the inputs of your

amplier, powered monitor, sound system, mixer or foot pedal.

If you’re using the Wi AudioStream receiver in stereo,
use both the L/ MONO and R jacks on your
effects foot pedal, or use the L and R inputs
for your sound system, sampler, mixer or
hard disk recorder.

Audio Input

Audio Cable

Belt Clip

23

Wi AudioStream

POWER

LINK

RECEIVER CONNECTION

5. Turn ON the receiver by pressing and holding the POWER

button on the receiver for 2 seconds.
F
F

communication between the transmitter and receiver has been established.

6. Place the receiver on the amp as shown. Alternatively the

receiver can be placed next to the foot pedal or stomp box.

7. Power up your Amp, Mixer, Digital Recorder or Foot pedal and you

are ready to go!

24

v

The Power Status LED on the receiver will show Solid Green LED.

The ashing Green LED on the transmitter will turn to Solid Green indicating

(Rx)

v

Wi AudioStream

RECEIVER CONNECTION

Connecting Headphones and In-Ear Professional Personal Monitors!

PLEASE PROTECT YOUR EARS! Prolonged use of headphones or
In-Ear personal monitors at high volumes may affect your hearing
capacity or may result in noise induced hearing loss (NHL).

1. Connect the 1/8” stereo connector end of your headphones or In-Ear

personal monitor into the “Audio Output” jack on the receiver.

2. Route the audio cable beneath the belt clip as shown to prevent

accidental disconnection of the cable.

3. Turn ON the receiver by pressing and holding the POWER

button on the receiver for 2 seconds.

F
F

indicating communications between the transmitter and receiver are established.

v

The Power Status LED on the receiver will show Solid Green LEDs.

The ashing Green LED on the transmitter will turn to Solid Green

(Rx)

Audio Output Jack

Audio Cable

v

In-ear Personal Monitors

Belt Clip

25

Wi AudioStream

Tx FUNCTION MATRIX

Transmitter (Tx) Button Function Matrix!

Function Button Activation Hold Time LED Status

Power ON/OFF POWER Press and Hold 2 sec Solid Green

Pairing Mode LINK Press and Hold 3 sec Fast Green Flashes

Signal Re-routing LINK Click Click

Volume UP/Down Click for Step, Press and hold for Auto Click

Mute ON/OFF Press and Hold 1.5 sec Solid Green and Blue

Sleep / Wake up Press and Hold to Sleep / Click to Wake 2 sec Two Green Flashes

Stereo Mic-in Mode Press and Hold 2 sec Solid Green LED and
Slow Blue LED Flashes

Mono Mic-in Mode Press and Hold 2 sec Solid Green LED and
Fast Blue LED Flashes

Stereo Line in Mode Press and Hold 2 sec Solid Green LED and
(Factory Setting) Two Blue LED Flashes

26

k
p

p

mn

o
q

r

r
r

Transmitter (Tx) LED Indicator Chart!

Function LED Status

Searching For Receiver Flashing Green

Linked to Receiver Solid Green

Sleep Mode Two Green Flashes

Low Battery Solid Green & Flashing Red

Charging With Power OFF Solid Red

Charging With Power ON Solid Red & Green

Charging Complete Red OFF

l
l
l
l
l
l
l

Wi AudioStream

Tx LED INDICATOR CHART

r
o
n
q
p
l

m

k

27

Wi AudioStream

Rx FUNCTION MATRIX

Receiver (Rx) Button Function Matrix!

Function Button Activation Hold Time LED Status

Power ON/OFF POWER Press and Hold 2 sec Solid Green

Pairing Mode LINK Press and Hold 3 sec Fast Green Flashes

Voice Over IP MIC LINK/VoIP Click (With Optional USB Tx Dongle) Click Solid Green LED and
Two Blue LED Flashes

Volume UP/Down Click for Step, Press and Hold for Auto Click

Mute ON/OFF Press and Hold 1.5 sec Solid Green & Blue

Play/Pause Click (With Optional USB Tx Dongle) Click

Next Track Click (With Optional USB Tx Dongle) Click

Prev Track Click (With Optional USB Tx Dongle) Click

28

v
z
z

xy

}
}
{
|

Receiver (Rx) LED Indicator Chart!

Function LED Status

Searching For Transmitter Flashing Green

Linked to Transmitter Solid Green

Sleep Slow Green Flashes for 5 minutes
then 2 Green Flashes (Activated by Tx)

Low Battery Solid Green & Flashing Red

Charging With Power OFF Solid Red

Charging With Power ON Solid Red & Green

Charging Complete Red OFF

w
w
w

w
w
w
w

Wi AudioStream

Rx LED INDICATOR CHART

|
}
y
{
z
w

x

v

29

Wi AudioStream

PRODUCT SPECIFICATIONS

Product Technical Specications!

Specications 

Transmission Format: 2.4 GHz, 16-bit, 48kHz Digital Wireless Communications
Frequency Response: 15Hz to 20kHz
Frequency Selection: Auto select
S/N Ratio: More than 89 dB (A-weighted) for stereo line-in mode
More than 84 dB (A-weighted) for stereo and mono MIC mode
Distortion: 0.12 % THD
Connectors: 1/8” (3.5mm) TSR Stereo
Max Input Level: 1Vrms
Max Output Level: 700mVrms
Input Impedance: 3.3K ohm

Output Impedance: < 10 ohm

Rechargeable Battery Life: 4~6 hours
Power Input: 5V DC, 500 mA

30

Wi AudioStream

PRODUCT SPECIFICATIONS

Specications 

Battery Power Booster: 10~13 hours (With optional AA battery power booster adapter)

USB Bus Power: Yes
Low Battery Alert: 15 minutes of life left
Power-up Modes: Three (3) power-up modes

(Stereo Line-in, Stereo Mic-in, Mono Mic-in)
Antenna: Two internal antennas

Range: > 100 ft (May not be dependent on line of sight. Range may vary due to local conditions)

Units operating at the same time: 10
Audio Signal Routing: One (1) transmitter can re-route audio signal to eight (8) different receivers

MAC/PC/iPod Compatible: Yes (With Optional Jangus Music USB Transmitter Dongle)
VoIP Capable: Yes

802.11g/n Network Safe: Yes
Transmitter Weight: 0.068 lbs (1.08 Oz) (30.8g)
Receiver Weight: 0.068 lbs (1.08 Oz) (30.8g)
Dimensions: 1.2” W x 0.6” D x 3.34” H
Mounting Method: Metal belt clip design

31

Wi AudioStream

INSTRUMENTS SUPPORT

Instruments Supported!

Instruments

• Miniature Condenser Microphones

• Subminiature Condenser Microphones

• Ear-Worn and Head -Worn Microphones

• Lavaliere Microphones

• Ambient Lavalier Microphones

• Clip-on Instrument Microphones for

Stringed, Brass and Wind Instruments

32

Stereo Mini

Microphones

Ear-Worn

Microphones

In-Ear

Monitors

Handheld

Recorders

Stringed

Instruments

Brass & Wind

Instruments

• Digital Multitrack Recorders

• Mixers and Live Sound Systems

• Ampliers and Powered Monitors

• DJ Gear and Samplers

• Professional Studio Monitor Headphones

• In-Ear Professional Personal Monitors

• MP3 Players & any device with a headphone jack

Ampliers

Monitors

Mixers

DJ Gear

Headphone

Monitors

Wi AudioStream

Regulatory Compliance Information

Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer­ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or
modications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

FCC NOTICES

Disposal and Recycling Information!

Correct Disposal

This symbol indicates that your product must be disposed of properly according to the local laws and
regulations. When your product reaches its end of life, contact the retailer where the product was
purchased or your local authorities to learn about recycling options. This product should not be mixed
with other commercial wastes for disposal.

33

Wi AudioStream

PRODUCT ACCESSORIES

Audio Matrix Accessories for Extreme Flexibility!

Accessory  Specications 

Wi StudioM: Digital wireless studio monitor headphones.

Wi USB Tx: Digital wireless USB transmitter for MAC/PC audio and VoIP applications.

Wi iPod Tx: Digital wireless transmitter for Apple iPod.

Wi AudioLink Tx: Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars,

Electric Acoustic Instruments, Digital Wind Instrument, Effects Pedals, Electronic

Drums, Mixers, Ampliers, Speakers, Sound Systems, Samplers, Digital Multitrack

Recorders, DJ Gear, Computers, Consumer Electronics products and more.

Wi AudioStream Tx: Digital wireless transmitter for Mono and Stereo microphones and personal
monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic,

Brass and Woodwind Instrument Microphones, MP3 players and more.

Wi AudioLink Rx: Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors,
Effects Pedals, Mixers, Ampliers, Speakers, Sound Systems, Samplers, Hard Disk

Recorders, DJ Gear, Computers, Consumer Electronics products and more.

34

Wi AudioStream

ACCESSORIES

Cable & Power Accessories for Extreme Flexibility!

Accessory  Specications 

Wi FreeBody Guitar Strap: Guitar strap with integrated wireless transmitter and AA battery power booster that
provide the experience of true wireless freedom without impeding your body movement.

When you remove your guitar, the wireless system goes with it to the guitar stand.

No more tangled cables or annoying bulky transmitters stuck to your body!

Wi PowerBooster: AA battery power booster USB adapter that attaches ot the Wi AudioStream and Wi
AudioLink to extend battery life to upto 13 hours.

Wi PowerAdapter: Universal USB power adapter for charging the Wi AudioStream and Wi AudioStream
transmitters.

Please visit our web site at www.jangusmusic.com

for the optional cable connection accessories

35

Wi AudioStream

PRODUCT WARRANTY

Product Warranty Terms!

Jangus Music, Inc warrants that its products are free from material defects and faulty workmanship for a period of twelve

(12) months from the date of purchase. Jangus Music will repair or replace, at its option, any Product that breaches this
warranty during said period. This warranty does not cover and is void with respect to (1) Products which have been im­properly installed, repaired, modied or altered; (2) Products which have been subject to abuse, misuse, physical damage,
exposure to re, water or excessive moisture or dampness; (3) Products on which the serial number has been removed,
altered, or rendered illegible; (4) Products that are operated outside the limits of the technical specications of the product.

Repair and/or replacement of the Jangus Music product will be performed through Jangus Music’s Return Material
Authorization (RMA) procedure. The customer is required to contact Jangus Music at www.jangusmusic.com to obtain the

approval and procedure for returning any product under warranty.

IN NO EVENT SHALL JANGUS MUSIC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, DIRECT, INDIRECT,
SPECIAL OR PUNITIVE DAMAGES WHICH ARISE IN ANY WAY OUT OF THE MANUFACTURE, SALE OR USE OF
ITS PRODUCTS OR SERVICES. In the event that a court of competent jurisdiction determines that Jangus Music is in
breach of any warranty, the amount of recoverable damages shall be limited to the cost of the replacement of any Product
found to be defective or nonconforming.

36

Wi AudioStream

PRODUCT WARRANTY

Out of Warranty!

Should your Wi AudioStream not function properly after the warranty period has expired, please contact Jangus

Music’s Customer Care at www.jangusmusic.com.

Limitations of Liability!

Jangus Music expressly assumes no responsibility for any error, omission, interruption, deletion, defect, delay in
operation or transmission, communications failure, theft or destruction or unauthorized access to, or alteration of,

any use of the Wi AudioStream product. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO
EVENT SHALL JANGUS MUSIC OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, PUNI­TIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO DAMAGES FOR; LOSS
OF PROFITS OR REVENUES, LOSS OF CONFIDENTIAL OR OTHER INFORMATION , BUSINESS INTERRUPTION,
PERSONAL INJURY, DEATH, LOSS OF PRIVACY, CORRUPTION OR LOSS OF DATA, FAILURES TO TRANSMIT
OR RECEIVE AUDIO OR ANY OTHER PECUNIARY LOSS WHATSOEVER ARISING OUT OF OR IN ANY WAY
RELATED TO THE USE OF OR INABILITY TO USE THE DEVICE OR THE SUPPORT SERVICES OR OTHERWISE IN
CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IF COMPANY OR ANY SUPPLIER HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

37

www.jangusmusic.com

© 2009 Jangus Music, Inc. All rights reserved. Wi, Wi AudioStream, Wi FreeBody, Digital Wireless Stereo logo and Jangus Music

logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other

countries. All other trademarks included herein are the property of their perspective owners. US and Foreign Patents Pending.

(Design and specications are subject to change without notice).