Page 1
WIDEX CROS QUICK GUIDE
For CROS/BiCROS Solutions
Models and Compatibility
Available in FUSION and FASHION BTE
Features
WIDEX CROS
Receiving Hearing Aid
Any WIDEX UNIQUE™ or WIDEX DREAM™ Models*
Can be matched to all UNIQUE or DREAM models
at all price points*
Low battery drain = Longer battery life
• FUSION: 1.0mA (150 hrs.)
• FASHION: 1.2mA (120 hrs.)
Slim design BTE model for CROS and BiCROS solutions
CROS Transmission Volume Control (FASHION only)
CROS Transmission Auto OFF with Auto ON selection
WidexLink™ wireless technology
*Not available with CIC MICRO model
For additional support,
please call Widex at 1-800-221-0188 or visit www.widexpro.com
Page 2
WIDEX CROS QUICK GUIDE
For CROS/BiCROS Solutions
Fitting and Matching CROS in COMPASS™ GPS
Select and connect receiving hearing aid.
1
Fit and program receiving hearing aid.
2
Matching begins.
5
Matching complete.
6
Go to handling.
3
Select CROS/BiCROS.
Start matching.
Select ‘Type of Fitting’,
4
‘Microphone Mode’ and
activation control.
CROS fi tting complete.
7
Select ‘Start Demonstration Mode’.
Note: This message is only if the CROS/BiCROS confi guration
needs to be modifi ed, not for gain or balance fi ne tuning
Demonstrating CROS/BiCROS.
8
Follow directions on screen.
NOTE: If the CROS is set to “auto-activate streaming” and the CROS/BiCROS matching needs to be reset,
please follow these steps:
1) open and close the CROS battery door,
2) press the program button on the CROS one time to stop CROS transmission,
3) choose “delete matching”on the CROS fi tting screen, 4) Follow step 3-8 to start the matching process again.
DRM236/0617
Loading...