Widefly WF360 Users Manual
WF360 POS PDA Quick Start Guide
Copyright
Copyright 2011-2013 Widefly Limited. All rights
reserved.
Product specifications and features are for reference
only and are subject to change without prior notice.
Declaration
This document is published by Widefly Limited
without any warranty.
Improvements and changes to this document
necessitated by typographical errors, inaccuracies of
current information, or improvements to programs
and/or equipment, may be made by Widefly Limited
any time and without notice. Such changes will,
however, be incorporated into new editions of this
Guide.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1． This device may not cause harmful interference, and
2． This device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications not
expressly approved by the party responsible for the
compliance could void the users’ authority to operate
the equipment.
WF360 POS PDA Quick Start Guide
Important safety information
Please read this carefully before using WF360 POS PDA.
Always treat the product with care and keep it in a
clean and dust-free place.
Do not expose the unit to moisture or humidity.
Do not expose the unit to extreme high or low
temperatures.
Do not attempt to disassemble the unit
Use only the power adaptors, charging cradle and
batteries approved by Widefly Limited. The use of
any other type may invalidate any approval and
warranty.
The socket outlet for the power adaptor shall be
installed near the equipment and shall be easily
accessible.
No reverse polarity charging with other power
adaptors/chargers, they may have inverse polarity.
Never use the power adaptor/chargers if the plug is
damaged.
Never touch the charger/power adaptor if your
hands/feet are wet.
Do not expose the charger/power adaptor to water, it
may cause electrical fires.
Do not repair the charger/power adaptor by yourself
for your safety.
To reduce the risk of fire and burns, do not
disassemble, crush or puncture the battery.
Dispose of used batteries according to the
instructions.
Do not dispose of the battery in fire or water.
Do not let the metal contacts on the battery touch
WF360 POS PDA Quick Start Guide
other metal object. It could lead to short-circuit and
damage the battery.
Only approved batteries, chargers/power adaptors
that are designed for the model can be used with the
unit.
Risk of explosion if battery is replaced by an incorrect
type.
Do not exchange with wrong model battery. It may
cause explosion. Please dispose battery following
instruction.
To prevent possible hearing damage, do
not listen at high volume levels for long
periods.
WF360 POS PDA Quick Start Guide
Table of Contents
1. Overview................................................... 1
1.1. WF360 Overview ................................. 1
1.2. Inserting and Removing Battery .......... 5
1.3. Charging Battery ................................. 6
1.4. LED Light Status .................................. 7
1.5. System Info ......................................... 8
2. Getting Started ......................................... 9
2.1. Turn ON/OFF ....................................... 9
2.2. System Sleep Mode & Wakeup ............10
2.3. Wi-Fi Basic Settings ............................11
2.4. Clean Reset ........................................13
3. Power Settings .........................................14
3.1. Screen Saving .....................................14
3.2. Configure Sleep Mode .........................15
WF360 POS PDA Quick Start Guide
Front
Without
Flip Cover
1. Overview
1.1. WF360 Overview
Main / Wi-Fi LED
Ambient Light Sensor
Protective Flip Cover
Touch Panel & LCD
P.1
WF360 POS PDA Quick Start Guide
Rear
USB Host for External
Hand Strap Hole
Strap Hole
Detachable Devices
Stylus for
Reset Button
Speaker
Note: the USB host was loaded with 5V
maximum 500mA during normal condition.
P.2
Battery Cover Latch
Battery Cover
Hand Strap Hole
(DC),
Loading...