Wide RDP2010UX User Manual
Issued Date
Revision Status
Title
Page No.
1 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
USER’S MANUAL
RDP2010UX(-TS)
RDP2010TS
1600 x 1200(20.1") TFT LCD MONITOR
Proprietary Data Notice:
This document as well as all reports, drawings, data, information, or other material, whether accompanying it are the property of
WIDE Corporation, are disclosed by WIDE only in confidence, and, except as WIDE may otherwise permit in writing, are to be
used, disclosed, or copied only to the extent necessary for the evaluation thereof by recipient, or higher-tier contractor or
subcontractor.
Information in this document is subject to change without prior notice.
Issued Date
Revision Status
Title
Page No.
2 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
Table of Contents
SAFETY INSTRUCTIONS .................................................................................................................3
BRIEF DESCRIPTION.......................................................................................................................5
GENERAL..........................................................................................................................................5
1. TECHNICAL SPECIFICATIONS ...............................................................................................7
1.1 ELECTRO-OPTICAL SPECIFICATIONS............................................................................7
1.1.1 Screen Specifications.................................................................................................7
1.1.2 Optical Characteristics ...............................................................................................7
1.1.3 Input Signal Specifications.........................................................................................8
1.1.4 Controls of the Display...............................................................................................8
1.1.5 LED Indicator ...............................................................................................................9
1.1.6 Power Supply Specification .......................................................................................9
1.1.7 Connectors...................................................................................................................9
1.1.8 Connection & PIN Assignment.................................................................................10
1.2 MECHANICAL SPECIFICATIONS....................................................................................12
1.2.1 Dimension and Weight (Rack Mount ).....................................................................12
1.2.2 Mounting.....................................................................................................................13
1.2.3 Finishing.....................................................................................................................14
1.2.4 Screws/Bolts..............................................................................................................14
1.2.5 Components...............................................................................................................14
1.2.6 Cooling .......................................................................................................................14
1.3 ENVIRONMENTAL SPECIFICA TIONS.............................................................................14
1.3.1 T emperature, Vibration, Shock, Humidity(Except touch screen model)..............14
1.3.2 EMC(Except touch screen model) ...........................................................................14
1.3.3 Drip-proof...................................................................................................................14
1.4 OHTER SPECIFICATIONS................................................................................................15
1.4.1 Maintainability............................................................................................................15
1.4.2 Use of toxic materials ...............................................................................................15
1.4.3 Packing.......................................................................................................................15
2 User Controls .........................................................................................................................16
2.1 Operation ..........................................................................................................................16
2.2 USER Control Access......................................................................................................17
2.3 OSD(ON SCREEN DISPLAY) Navigation........................................................................17
2.3.1 Adjustment.................................................................................................................18
2.3.2 COLOR ADJ................................................................................................................21
2.3.3 PIP MENU ( CVBS Model Only ) ...............................................................................24
2.3.4 SETUP MENU.............................................................................................................26
Appendix A: Touch screen driver installation(only for RDP2010TS)........................................33
Issued Date
Revision Status
Title
Page No.
3 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
SAFETY INSTRUCTIONS
Precautions
ON SAFETY
1. Before connecting the AC power cord to monitor, make sure the voltage designation of the monitor
corresponds to the local electrical supply..
2. Never insert anything metallic into the cabinet openings of the monitor; doing so may create the
danger of electric shock..
3. To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open
the case of the monitor.
4. Never use your monitor if the power cord has been damaged. Do not allow anything to rest on the
power cord, and keep the cord away from areas where people can trip over it.
5. Be sure to hold the plug, not the cord, when disconnecting the monitor from an electric socket.
6. Unplug your monitor when it is going to be left unused for an extended period of time.
7. Unplug your monitor from AC outlet before any service.
8. If your monitor does not operate normally - in particular, if there are any unusual sounds or smell
coming from it – unplug it immediately an authorized dealer or service center.
ON INSTALLATION
1. Openings and fans in the monitor cabinet are provided for ventilation. To prevent overheating, these
openings and fans should not be blocked or covered. Also avoid using the monitor on a bed, sofa rug,
or other soft surface, doing so may block the ventilation openings and fans in the monitor cabinet. If
you put the monitor in the enclosed space, be sure to provide adequate ventilation.
2. Put your monitor in a location with low humidity and minimum of dust.
3. Do not expose the monitor to rain or use it near water. If the monitor, accidentally, get wet, unplug it
and contact an authorized dealer immediately. You can clean the monitor with damp cloth if necessary,
but be sure to unplug the monitor first.
4. Place your monitor on a solid surface and treat it carefully.
5. Locate your monitor near an easily accessible AC outlet.
6. High temperature can cause problems. Do not use your monitor in direct sunlight and keep it away
from heater, stoves and other sources of heat.
CAUTION: DOUBLE POLE / NEUTRAL FUSING.
DISCONNECT POWER BEFORE CHANGING FUSE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Issued Date
Revision Status
Title
Page No.
4 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
ON CLEANING
The screen is made of thin glass with a plastic surface and can be damaged if dropped, hit and scratched.
Do not clean the front panel with keton-type materials(e.g., acetone), ethyl alcohol, toluene, ethyl acid,
methyl or chloride – these may damage the panel.
ON REPACKING
Do not throw away the carton and packing materials. They make an ideal container which to transfer the
unit. If you have any questions about this unit, contact your authorized dealer.
ON DISPOSAL
This unit contains which can pollute the environment if disposed carelessly. Please contact our nearest
representative office or your local environment al office in case of disposal of this unit.
ON VESA MOUNTING
z Make sure to unplug before installing this product. Otherwise, it may cause a fire or could give
an electric shock.
z Do not install this product by yourself. Contact the qualified service technician. Otherwise, it may
cause injuries.
z Do not install this product on the place where it cannot be supported. Otherwise, it may cause
the product to fall and could cause injuries.
z Contact the qualified service technician for moving or replacing this product after installing.
Installing the product needs specified technique, so it may cause safety problem to move or
install it by yourself.
z Do not hang on or impact on this product. Otherwise, it may cause the product to fall and could
cause injuries.
z Do not install this product by alone. Get some help from others. Otherwise, it may cause the
product to fall and could cause injuries.
z Do not place a heat source or a humidifier under the installed product. Otherwise, it may cause a
fire or could give an electric shock.
z Do not install this product near a high voltage electric line, any power source or the place where
impact or vibration can affect.
z Do not install this product barehanded. Otherwise, it may cause injuries.
z The screw is not provided to user as default. Use the screw, which can stand the weight of this
product. And, we recom mend the machine screw BH(+)M4 x 14mm to 18mm as type
Issued Date
Revision Status
Title
Page No.
5 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
BRIEF DESCRIPTION
GENERAL
This specification defines the requirements for the RDP2010UX, 20.1” COLOR DISPLAY TFT LCD
monitor with 1600 X 1200 pixels visible resolution, which is designed and tailored for use in operator
display systems such as Rugged and Industrial monitor applications.
The RDP2010UX has a 20.1” diagonal viewable display area and 1600 x 1200 pi xels addressable
resolution. The (0.085 X RGB) X 0.255 mm dot pitch LCD provides the most accurate and crisp images
on the screen for mission critical applications.
The RDP2010UX provides 16.7 million true colors (8-bit) per pixel. Each pixel is divided into Red, Green
and Blue sub pixels which are arranged in vertical stripes and each sub-pixel is controlled in 2 56 grey
levels.
The RDP2010UX is standard rack mountable. And, touch-screen of resistive type may be provided
as option.
KEY FEATURES
z Color display 20.1” TFT LCD Monitor
z Full 1600 x 1200 resolution
z Two Analog (BNC and D-sub) input, single DVI-D input.
z RS-422, RS-485 and RS-232 Communication
z Versatile mechanical version : Rack mount, Desktop Type(T.B.D) , VESA Mount Type(T.B.D)
z Free Voltage power : AC 100 ~ 250Vac, 50/60Hz±3
z Option: Resistive type Touch screen, Serial control(DB-9)
INPUT DIAGRAM
RDP2010UX (Touch screen option)
① Power Switch ② Power Inlet
③ Serial Interface ④ DVI-D Input
⑤ Touch Screen Serial Control (option) ⑥ D-Sub Input
⑦ BNC Input
Issued Date
Revision Status
Title
Page No.
6 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
RDP2010UX (CVBS option)
① Power Switch ② Power Inlet
③ Serial Interface ④ DVI-D Input
⑤ Touch Screen Serial Control (option) ⑥ D-Sub Input
⑦ Composite Video Input(BNC)
RDP2010UX (MIL MS-3100F10SL-3P option)
① Power Switch ② AC MIL power Inlet
③ Serial Interface ④ DVI-D Input
⑤ D-Sub Input ⑥
BNC Input
z BNC and D-sub input connectable to any source compatible to general CRT monitor
z Digital input fully compatible to DVI-D Standard of VESA DDWG
z Chain of Power just one level through power output totally
Issued Date
Revision Status
Title
Page No.
7 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
1. TECHNICAL SPECIFICATIONS
1.1 ELECTRO-OPTICAL SPECIFICATIONS
1.1.1 Screen Specifications
1.1.1.1 Panel Technologies
AMLCD (Active Matrix Liquid Cryst al Display) technology
Amorphous silicon TFT (Thin Film Transistor) technology
1.1.1.2 Screen Dimensions
Aspect ratio 4:3
Active screen size:
408 (H) x 306 (V) mm (16.06” x 12.04”)
510.5 mm (20.1”) diagonal
1.1.1.3 Display colors
16,777,216 true colors (8-bit), 256 grey scales
1.1.1.4 Resolution
1600 (H) x 1200 (V) pixels
Pixel arrangement: RGB (Red dot, Green dot, Blue dot) Vertical Stripe
Pixel pitch: 0.255 (W) x 0.255 (H) mm
1.1.1.5 Display mode
Normally Black
1.1.2 Optical Characteristics
1.1.2.1 Protective Filter Glass
Clear, Strengthening glass
Anti Reflective Film and Anti-Static Treatment
1.1.2.2 Luminance (Brightness)
280 cd/m² (typ. typical on LCD)
200 cd/m² (max. typical on Protective Filter Glass)
200 cd/m² (max. typical on touch screen)
Dimming Ratio: 1000 to 1
White uniformity: 75% max.
1.1.2.3 Contrast ratio
700 : 1 (typical on LCD)
1.1.2.4 Viewing Angle: At the contrast ratio > 10:1
Horizontal: +/- 89° (typical)
Vertical: +/- 89° (typical)
1.1.2.5 Response time @ 25°C ambient
Tr : (White → Black)
Td : (Black → White)
Tr + Td : 16 ms (typical)
Issued Date
Revision Status
Title
Page No.
8 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
1.1.3 Input Signal Specifications
RDP2010UX provides maximum four (4) input signal interfaces, 2 x Analog (BNC,D-sub) Input ,1x Digital Input
and 1x Composite video Input.
Standard input resolution is UXGA (1600 x 1200 pixels)
Other resolutions are supported as specified below. No scaling is provided for input signals with resolutions
less than the standard input resolution 1600x 1200 pixels.
Resolution
Hsync
(KHz)
Vsync
(Hz)
VGA 640 x 480
31.0 - 43.0 60.0 - 85.0
SVGA 800 x 600
35.0 - 53.7
56.0 - 85.0
XGA 1024 x 768
48.4 - 68.3 60.0 - 85.0
SXGA 1280 x 1024
64.0 – 91.2 60.0 - 85.0
UXGA(analog) 1600 x 1200 75.0 – 93.8
60.0 - 75.0
UXGA(digital) 1600 x 1200 75
60.0
1.1.3.1 Analog Input
Analog RGB input signal shall be as follows:
Video Signal Level: 0.714 Vp-p nominal
Video Signal Polarity: Positive (Black to White). Polarity is detected automatically.
Both 0 V to +0.714 Vp-p and -0.714 V to 0 Vp-p is allowed.
Video Input Impedance: 75Ω terminated (RGB Video Signal)
Sync: TTL voltage levels, External Separate H & V Sync.
Interlace: Non-interlaced
1.1.3.2 Composite Video Input
Color system : NTSC,PAL,SECAM
Signal Connector : BNC
1.1.3.3 Input Selection
In case multiple input source is connected, input to be displayed can be selected by:
Manual: Operator can select the input manually using control panel.
1.1.4 Controls of the Display
1.1.4.1 Remote Control via serial ports (JH Communication compatible)
There are serial ports on the back side of the RDP2010UX for remote control of the monitor by customer
application.
RS-232/422/485 port: D-Sub, 9p, Female (for JH protocol)
1.1.4.2 Control via OSD
Control block with the push buttons is available: Menu, Select, ◀ and ▶ . Settings are selected by the Menu
that guides you through the OSD menu.
Control block also has ◀ and ▶for dimming brightness.
Control block also has LE D indicators, refer to 1.1.5.
Issued Date
Revision Status
Title
Page No.
9 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
1.1.5 LED Indicator
Fault information in available by LED indicators
Normal : Green indicator
Soft Power Off: Amber indicator
No signal : Amber Blinking (every 1 second) indicator
System Fault : Red indicator
1.1.6 Power Supply Specification
1.1.6.1 Voltage range
Standard :100 –-240Vac(Normal), 47~63Hz,1.7A
Voltage Range : AC 100 - 250V
1.1.6.2 Power consumption
Normal
Max.
(100% Light output)
RDP2010UX 70 W 75W
1.1.6.3 Power variation protection
Unit will not be damaged when Voltage transients remain within value as defined in the applicable voltage
range
1.1.6.4 Over-temperature protection
When the internal temperature gets above than the warning level (65℃), the light output of the backlight is
half. And, LED as red colo r
When the internal temperature reaches above the critical Value (80℃), the light output of the backlight is
turned off. And, LED as red color
When the internal temperature gets below than the safe level (64℃), the light output of the backlight is
restored. And, LED recovers to green.
1.1.7 Connectors
1.1.7.1 Power connectors
Standard: IEC type connector
MIL MS-3100F10SL-3P (option)
1.1.7.2 Input signal connectors
Analog Input : 5 Coaxial BNC connectors for R, G, B, HS and VS
D-Sub 15pin connector
Digital input : DVI-D connector
Composit video input (option) : BNC connector
1.1.7.3 Interface connectors for remote control
RS-232/422/485 port: Sub D, 9p, Female (for JH protocol)
Touch screen serial control (Option): 9p Dsub female
Issued Date
Revision Status
Title
Page No.
10 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
1.1.8 Connection & PIN Assignment
Power Input / output
MIL Power Input / output(option)
Analog Input (BNC)
Analog Input (D-Sub)
Video Input (BNC) ( option )
● AC 100-250V, 47~63Hz
with double pole / neutral fusing, 250V F3.15AL
● Disconnect power before changing fuse
● Chain thru power output to limit to one level totally
● R : Analog Red Signal Input (0.7 Vpp, 75 ohm)
● G : Analog Green Signal Input (0.7 Vpp, 75 ohm )
● B : Analog Blue Signal Input (0.7 Vpp, 75 ohm)
● HS : Horizontal Sync Signal Input (TTL)
● VS : Vertical Sync Signal Input (TTL)
● Connection Type : 5 x BNC
● Connection Type : 15p D-Sub Female (Analog only support)
1. Red
2. Green
3. Blue
4. Ground
5. DDC Ground
6. Red Ground
7. Green Ground
8. Blue Ground
9. back up
10. sync Ground
11. Ground
12. DDC Data
13. H sync
14. V sync
15. DDC Clock
● CVBS : Composite Video Signal Input
(1.0 Vpp / Sync.negative, 75 ohm)
● MIL MS-3100F10SL-3P
● AC 100-250V, 47~63Hz
1. A: Live(hot) line
2. B: Ground
3. C: Neutral line
Issued Date
Revision Status
Title
Page No.
11 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
Digital Input
Serial Interface
T ouch Screen Serial Control(option)
D-sub
● Connection Type : DVI-D Female (Digital only support)
1. TMDS Data 2-
2. TMDS Data 2+
3. TMDS Data 2/4 Shield
4. TMDS Data 4-
5. TMDS Data 4+
6. DDC Clock
7. DDC Data
8. No Connection
9. TMDS Data 1-
10. TMDS Data 1+
11. TMDS Data1/3 Shield
12. TMDS Data 3-
13. TMDS Data 3+
14. +5V power
15. Ground (Return for +5V)
16. Hot Plug Detection
17. TMDS Data 0-
18. TMDS Data 0+
19. TMDS Data 0/5 Shield
20. TMDS Data 5-
21. TMDS Data 5+
22. TMDS Clock Shield
23. TMDS Clock+
24. TMDS Clock-
C1 ~ C5 : No Connection
● Remote In(female)
1. No connection
2. RxD (for RS-232)
3. TxD (for RS-232)
4. TxIN_- (for RS-422/485)
5. RxIN_- (for RS-422/485)
6. No connection
7. Ground
8. TxIN_+ (for RS-422/485)
9. RxIN_+ (for RS-422/485)
● Touch screen serial control(female)
1. DCD("carrier detect", handshake='0'
(POSITIVE) when controller power on)
2. RXD (serial data from controller to host)
3. TXD (serial data from host to controller)
4. DTR ("data terminal ready", handshake='0'
(POSITIVE) when controller may send )
5. SG (signal ground)
6. DSR ("data set ready", handshake='0'
(POSITIVE) when controller power on)
7. RTS ("ready to send", handshake='0'
(POSITIVE) when controller may send)
8. CTS (used as "ready to receive", handshake='0'
(POSITIVE) when host may send)
9. RI (not used)
Issued Date
Revision Status
Title
Page No.
12 / 39
V2.8
2008-07-31
RDP2010UX
(AL20SUX)
1.2 MECHANICAL SPECIFICATIONS
1.2.1 Dimension and Weight (Rack Mount )
The dimension of the unit is as shown in the table below:
Monitor only Packing
Height (mm / inch) 399 / 15.70 661/26.02
Width (mm / inch) 482 / 18.97 701/27.60
Depth (mm / inch) 125.5 / 4.94 377/14.84
Weight (kg / lbs) 11 / 24.25 18.5/40.79
The following figures show a Rack Mount version mechanical dimension. RDP2010UX basically provides three
input connectors and all connectors are located the bottom side of monitor.
< Front View : Unit mm >
< Bottom View >
Loading...