Wide IF2105M, PN21IQS User Manual
USER’S MANUAL
IF2105M(PN21IQS)
TFT–LCD Monitor
1
Table of Contents
Safety Instructions ............................................................................................................2
Your New LCD Monitor ....................................................................................................5
Feature and Benefits.............................................................................................. 5
Unpacking Your Monitor.........................................................................................5
Regulatory Information ....................................................................................................6
Setting up Your LCD Monitor .........................................................................................8
Connecting Your LCD Monitor ...............................................................................8
Stand User Controls ...............................................................................................9
Adjusting Your LCD Monitor .......................................................................................... 9
Main User Controls................................................................................................................... 9
User Controls .........................................................................................................9
OSD Lock / Unlock .................................................................................................9
On Screen Display(OSD) Controls ....................................................................... 10
Direct Access buttons ...................................................................................10
Brightness ..................................................................................................... 10
Warm-up Time .............................................................................................. 10
Utility(Service control only) ................................................................................. 11
Accessing the menu system ......................................................................... 11
Utility Function Controls ............................................................................... 12
Appendix .............................................................................................................................14
Specifications(Monitor main) ................................................................................................. 14
Electrical Specifications ............................................................................... 14
Mechanical Specification and Regulatory ....................................................15
Power Management ............................................................................................16
Pin Assignments ..................................................................................................17
Troubleshooting ................................................................................................... 18
2
Safety Instructions
Explanation of Graphical Symbols
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of the important operating and maintenance (servicing) instructions in the literature accompaning
the appliance.
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
be user to the presence of un-insulated "dangerous voltage" within the product's enclosure that
of may sufficient magnitude to constitute a risk of electric shock to persons.
Stand-by Switch. Press to turn the monitor on or off (Stand-by mode).
Direct Current.
Warning : When the unit is used together with other equipment in the patient area, the equipment shall be
connected according to Standard UL60601-1 and IEC60601-1.
Classification :
• Protection against electric shock: Class l including AC/DC Adapter.
• Applied Parts: No Applied Parts.
• Protection against harmful ingress of water: ordinary IPXO.
• Degree of safety in the presence of flammable anesthetics mixture with air or with oxygen or with
nitrous oxide:
Not suitable for use in the presence of a flammable anesthetics mixture with air or with oxygen or with
nitrous oxide.
• Mode of operation: Continuous.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LCD MONITOR
54IJ
E217340
WITH RESPECT TO ELECTRIC SHOCK,
FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH UL60601-1 AND
CAN/CSA C22.2 NO. 601.1,
MEDICAL EQUIPMENT CERTIFIED FOR CANADA
Grounding Reliability Can Only Be Achieved When The Equipment ls Connected
To An Equivalent Receptacle Marked “Hospital Only” or “Hospital Grade”.
3
Safety Instructions
Precautions
On Safety
1. Before connecting the AC power cord to the DC adapter outlet, make sure the voltage
designation of the DC adapter corresponds to the local electrical supply.
2. Never insert anything metallic into the cabinet openings of the Liquid Crystal
Display(LCD) monitor ; doing so may create the danger of electric shock.
3. To reduce the risk of electric shock, do not remove cover. No user-serviceable parts
inside. Only a qualified technician should open the case of the LCD monitor.
4. Never use your LCD monitor if the power cord has been damaged. Do not allow anything
to rest on the power cord, and keep the cord away from areas where people can trip
over it.
5. Be sure to hold the plug, not the cord, when disconnecting the LCD monitor from an
electric socket.
6. Unplug your LCD monitor when it is going to be left unused for an extended period of
time.
7. Unplug your LCD monitor from the AC outlet before any service.
8. If your LCD monitor does not operate normally - in particular, if there are any unusual
sounds or smells coming from it - unplug it immediately am authorized dealer or service
center.
WARNING Do not touch signal input, signal output or other connectors, and the
patient simultaneously.
WARNING External equipment intended for connection to signal input, signal output
or other connectors, shall comply with relevant IEC Standard (e.g.,IEC60950
for IT equipment and IEC60601-1 series for medical electrical equipment).
In addition, all such combination-system-shall comply with the standard
IEC60601-1 and/or IEC60601-1-1 harmonized national standard or the
combination.
If, in doubt, contact qualified technician or your local representative.
4
Safety Instructions
This TFT LCD Monitor is as accessory intended for use with Medical Equipment to display
alpha, numerical and graphical data.
On Installation
1. Openings in the LCD monitor cabinet are provided for ventilation. To prevent overheating, these
openings should not be blocked or covered. Also avoid using the LCD monitor on a bed, sofa rug, or
other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you
put the LCD monitor in a bookcase or some other enclosed space, be sure to provide adequate
ventilation.
2. Put your LCD monitor in a location with low humidity and a minimum of dust.
3. Do not expose the LCD monitor to rain or use it near water (in kitchens, near swimming pools, etc.).
If the LCD monitor accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean the LCD monitor with a damp cloth if necessary, but be sure to unplug the
LCD monitor first.
4. Place your LCD monitor on a solid surface and treat it carefully.
5. Locate your LCD monitor near an easily accessible AC outlet.
6. High temperature can cause problems. Don't use your LCD monitor in direct sunlight and keep it
away from heaters, stoves, fireplaces, and other sources of heat.
On Cleaning
The screen is made of thin glass with a plastic front surface and can be damaged if dropped, hit or
scratched. Do not clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene,
ethyl acid, methyl, or chloride - these may damage the panel.
Panel : Clean with a soft woolen or cotton towel. Use a watery solution or a mild commercial glass
cleaning solution.
Cabinet : Clean with a soft cloth dampened with mild detergent and water. Repeat this with water
only and wipe dry with a dry cloth.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container which to transfer
the unit. If you have any questions about this unit, contact your authorized dealer.
On Disposal
This unit contains which can pollute the environment if disposed carelessly. Please contact our
nearest representative office or your local environmental office in case of disposal of this unit.
Contact
WIDE Corporation
806-3, Yangcheong-Ri, Ochang-Myun, Cheongwon-Gun, Chungbuk-DO, 363-883, KOREA
(TEL : +82 - 43 - 219 - 2800 FAX : +82 - 43 - 219 - 2900)
5
Your New LCD Monitor
Feature and Benefits
• Dual design - Digital Interface
- Clear, sharp and crisp image
• Flexibility - Portrait/Landscape Display
- Auto pivot and Auto Height-adjustable Stand (Optional)
• Superior Spec - High Luminance/High Contrast ratio
- Wide viewing angle
- Large Display Area(21.3")
Unpacking Your Monitor
When you unpack the LCD Monitor, make sure that you have items below.
Manual
Monitor
Warranty Card
(not available in all locations)
Power Cord
DC Adapter
USB-Driver
USB-Cable
DVI Signal Cable
6
Regulatory Information
FCC Information
User Instructions
The Federal Communications Commission Radio Frequency Interference Statement includes
the following warning:
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television receptions,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
User Information
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/television technician for additional
suggestions. You may find the booklet called How to Identify and Resolve Radio/TV
Interference Problems helpful. This booklet was prepared by the Federal Communications
Commission. It is available from the U.S. Government Printing Office, Washington, DC
20402, Stock Number 004-000-00345-4.
Warning
User must use shielded signal interface cables to maintain FCC compliance for
the product.
Loading...