WiCave Home Installation & User Manual

WiCave Home

Installation & User Manual

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

Contents:

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

Installation Guide

1. What's in the Box Page 1

2. Safety Precaution Pages 2,3

3. Electrical Specifications Page 4

4. Load Compatibility details Page 5

5. Installing your new WiCave home Pages 6-10

6. Configuring your system Pages 11-12

7. Trouble Shooting Pages 13

What’s in the box

Inside the box you will find the following;



1 x Assembled Wi cave module



10 x Wires 1 feet each



10. Ferrules ( L,N, 1-4, A-D)



2 x Screws



2 x Wall Plugs



Installation & User Manual

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

1

2

3

4

5

Congratulations and thank you for purchasing WiCave Home. The following product
description will provide you with useful information about its use.

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

Safety Precautions:

Safety Precautions:

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

•

Please comply strictly with the following instructions which are intended to ensure safe
operation of the controller.

•

Application of voltages other than the rated voltage may seriously damage the internal
elements

•

Separate the WiCave Module from any potential sources of noise, such as high-voltage
lines. When using inductive loads(e.g., electromagnetic relays), connect noise­absorbing elements (resistor and capacitor) to both ends of the coil.

•

Do not install the module close to sources of excessive static electricity (e.g., forming
compounds, powders, or fluid materials being transported by pipe). Locations subject
to temperatures or humidity outside the range specified in the specifications.

•

Do not use the WiCave Module in dusty environments, in locations where corrosive
gases are present, or in locations subject to direct sunlight.

•

This product is not waterproof or oil-proof. Do not use it in locations where water or oil
may enter the product interior.

•

Take adequate protective measures for the power supply of the Time Switch (such as
providing a breaker and fuse).

Electrical specifications:

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

AC SPECIFICATIONS

Operating Input Power Range 90VAC-264VAC±5%, 47-63Hz, 5A Max.

Maximum Load per Node.

200W Resistive Load @ 230VAC input.

150VA Inductive Load @ 230VAC input.

Dimmer Output power for Inductive Loads 10VA – 150VA @ 230VAC.

GENERAL SPECIFICATIONS

Power Consumption <0.2W no load <1.0W Loaded.

Temperature

Operation 0°C to +50°C.

Storage -20°C to +70°C.

Relative Humidity

Operating 5%RH to 95%RH Non-Condensing.

Storage 5%RH to 95%RH Non-Condensing.

Dimension 80mm x 50mm x 25mm

RF Frequency 2.45GHz

Enclosure ABS Plastic FR Grade.

Load Compatibility details:

Contact Us:
Call: 99702 84513 ; Email: [e-mail] ; Web site: www.wicave.com

Types of loads compatible with WiCave home:

•

-Each WI cave Home module is capable of handling 4 loads.

•

WiCave Home enables ON/OFF loads and also it can regulate speed of fan or
control intensity of dimmable type lamps.

•

A : Light sources(CFL, LED lamps, etc),, Television, Desktop computer and other
utility appliances.

•

B: Speed controlled /Dimmable loads: Incandescent lamps, halogen lamps,
dimmable CFL lamps, dimmable LED lamps, dimmable ceiling fans and other
dimmable resistive and inductive loads.

Module Connector Details &
Load data :

N- NEUTRAL
L- LINE
1- LOAD 1
2- LOAD 2
3- LOAD 3
4- LOAD 4
A-SWITCH 1
B-SWITCH 2
C-SWITCH 3
D-SWITCH 4

N

L

1
2
3
4

A
B
C
D