Page 1
G3 PRIMO CAPPUCCINO SYSTEMS
MODELS: PCGT3; PCGT4; PCGT5
Rich in Design.
Rich in Features.
Rich in Profits.
HOT
ITEM NO
PROJECT
DATE
COLD
Page 2
INTRODUCING . . . THE CURTIS G3 CONCEPT
S E R I E S
CO NCE PT
S E R I E S
Careful liquid i s hot•Release button when c up is 3/ 4 full
Model PCGT3 /PCGT5
Beautifully styled, digitally advanced and financially rewarding, there’s
never been anything like the all-new G3 Concept
Series Primo Cappuccino™ Machine from Curtis.
The first thing you’ll notice about the new
Primo Cappuccino is its
smooth Euro-Styled lines,
with an impressive, over-
sized backlit display. The PCGT captures attention from the moment your
customers walk in... stimulating more impulse sales.
But the real beauty is what lies behind its stunning surface. Curtis has
incorporated the industry’s most advanced digital technology – G3 ADS™ –
into the new Primo Cappuccino Machine. It’s this G3 technology that
dramatically
simplifies use,
minimizes
maintenance
▲
▲
costs and
increases your
profitability.
FEATURES AT A GLANCE
• G3 ADS™ Digital Control Module (G3/ADS™) –
Provides precise control over all critical blending
and dispensing functions.
• Pre-Dispense – Easy to use. Choose a size from
small, medium or large by the touch of a button.
• Factory Pre-Set – For out-of-the-box operation.
• Irradiant LCD Digital Display – Extra bright and
easy to see.
• Scroll-Through Precision Programming –
Adjust powder flow in 5% increments and water
temperature from 80°F to 200°F to create the
perfect hot or cold beverage for your operation.
• Uniform programming is ideal for large roll-
outs of equipment.
• Access Code – Prevents unauthorized access to
programming and control features.
• Touch Controls –
Smooth and easy-toclean.
• On-Board
Diagnostics –
Continually senses
proper operation. A
Service Number will
be displayed if technical assistance is
required.
Curtis G3 Primo Cappuccino Machines are available in your choice of
models. Select fr
om three, four, or five dispensing heads. Each provides
unmatched reliability, serviceability, sales AND more profits than ever
before!
PCGT3 PCGT4 PCGT5
• Fully Sealed – G3 chips and processors are
encapsulated in an impact-resistant polymer, virtually elimin
ating the harmful effects of heat,
moisture and physical damage.
• Direct Drive Mixing Augers – Ensure smooth,
high-speed blending of powdered drinks.
• High Velocity Whipping Motors – Sloped whip-
g motors ensure smooth, high-speed blending
pin
of powdered drinks.
• Digital Temperature Control – Precisely senses
water temper
ature and level to maximize energy
efficiency and prevent heating element burnout.
•
Fixed-Flow Water System
– En
sures precise drink
blending regardless of irregularities in water pressure/volume.
• Standard 120VAC Operation – Makes installation
quick and simple.
• Curtis Exclusive 3/2/1 Warranty – 3-years elec-
tronic components, 2-years non-electronic components, 1-year labor.
Page 3
SERIES PRIMO CAPPUCCINO MACHINE.
Easy Access Front
Open Door with Inside
Hinged Panel
Simplies powder rells and
maintenance. Provides easy
access to change lighted
graphic or replace the units
standard orescent tube.
Oversized Backlighted Graphic
Attracts customers. Increases impulse sales. Choose
Hot or Iced Cappuccino graphic on PCGT3 model.
Touch-Button Hot Water Cleaning System
Simple, one button operation sends a powerful blast of
hot water into the whipper chamber, rinsing it for easy
clean-up and reducing powder build up.
Easy-Serv Dispensing Tubes.
Bright yellow color directs customers to proper cup
placement. Extended, taper design prevents splashes.
Large Capacity Drip
Tray/Cup Guide
Integral guide, positions cups
directly below dispensing spout.
Dual overow via-ducts indicate
when drip tray should be drained
and serviced.
Angled Whipping
Chamber and “Brake-Type”
Auger Motors
To ensure perfect drinks, powder
augers feature a brake-type motor
that accurately stops the dispensing
process at your set ratio every time.
Angled chamber drain liquids far
better to signicantly reduce cleaning
equirements.
r
PCGT3 PCGT4
Multi-Volume Powder Hoppers
Both 5 lb. and 10 lb. sizes allow operators to double the
volume of top selling avors... reducing ll times.
Hoppers must be removed for relling, virtually eliminating the wear and operating downtime caused by spilled
powder. Positioning guides make it impossible to insert
the hoppers incorrectly.
Pre-Dispense Control Label
Each adjustable station is factory preset to:
12 oz. small cup; 16 oz. medium cup; 20 oz. large cup.
Page 4
34.5
[90.2 cm]
7.25
[18.4 cm]
24.3
[61.7 cm]
23.5
[59.7 cm]
14.5
[36.8 cm]
4.7
[11.9 cm]
1.6
[4.1 cm]
34.5
[90.2 cm]
7.25
[18.4 cm]
24.3
[61.7 cm]
23.5
[59.7 cm]
14.5
[36.8 cm]
4.7
[11.9 cm]
1.6
[4.1 cm]
34.5
[90.2 cm]
24.3
[61.7 cm]
23.5
[59.7 cm]
21.0
[53.3 cm]
7.2
[18.3 cm]
1.6
[4.1 cm]
7.25
[18.4 cm]
PCGT3
34.5
[90.2 cm]
7.25
[18.4 cm]
24.3
[61.7 cm]
23.5
[59.7 cm]
14.5
[36.8 cm]
4.7
[11.9 cm]
1.6
[4.1 cm]
34.5
[90.2 cm]
24.3
[61.7 cm]
23.5
[59.7 cm]
21.0
[53.3 cm]
7.2
[18.3 cm]
1.6
[4.1 cm]
7.25
[18.4 cm]
34.5
[90.2 cm]
7.25
[18.4 cm]
21.0
[53.3 cm]
7.2
[18.3 cm]
1.6
[4.1 cm]
24.3
[61.7 cm]
23.5
[59.7 cm]
(Hot and Cold
Cappuccino)
Optional:
Pre-Dispense
PCGT4
PCGT5
Hoppers 543
5TGCP4TGCP3TGCPsnoitacificepS
.bl 5-3 dna .bl 01-2.bl 5-2 dna .bl 01-2.bl 5-1 dna .bl 01-2yticapaC reppoH
snollag 52.5snollag 52.5snollag 52.5knaT retaW
”39.71 x ”5.31”39.71 x ”5.31”28.11 x ”57.31)WxH( aerA yalpsiD dethgiL
”5.32 x”12 x”5.43”5.32 x”12 x”5.43”5.32 x”5.41 x”5.43)DxWxH( snoisnemiD
”52.7”52.7”52.7*ecnaraelC puC
zH06/CAV021zH06/CAV021zH06/CAV021egatloV
A51/W0081A51/W0081A51/W0081stnemeriuqeR rewoP
P51-5 AMEN/tf 6P51-5 AMEN/tf 6P51-5 AMEN/tf 6gulP & droC
eralF ”4/1eralF ”4/1eralF ”4/1telnI retaW
.sbl 541.sbl 931.sbl 08thgieW gnippihS
Cube 01017
© 2007 Wilbur Curtis Company, Inc. Printed In U.S.A · OCT/07 – 11421 F-3226 rev. D
WILBUR CUR
cco Street, Montebello, CA 90640-5403
6913 A
TIS COMPANY, INC.
Telephone: 800-421-6150 · 323-837-2300
Fax: 323-837-2406
www.wilburcurtis.com
*Shorter extension tubes are available for greater cup clearance.
Loading...