Whyte Technologies WSCR504, WSCR508, WSCR506, WSCR512, WSCR516 Instruction Manual

DSCR MULTISWITCH

INSTRUCTION MANUAL

www.whytetechnologies.com

MODELS:
WSCR504
WSCR506
WSCR508
WSCR512
WSCR516

Safety

Precauons

Guarantee

General Descripon

Product Descripon

Technical Descripon

Installaon Instrucons

Commissioning the Mulswitch

Example Conguraon

Specicaons

3

3

3

4

5

6

8

11

12

14

CONTENTS

www.whytetechnologies.com

2

www.whytetechnologies.com

3

Whyte

SAFETY

The Mulswitches are intended for indoor use only. Do not install the Mulswitch
in damp, humid, hot or dusty areas.

Switch o and remove the power supply when making connecons to the
Mulswitch to avoid damaging the unit.

Always earth bond the Mulswitch using the Earth Bonding Lug and/or the
Earth Terminal Bars to a suitable earth bonding point using minimum 4mm²
diameter earth cable.

PRECAUTIONS

To ensure trouble free operaon:

Do not remove the cover of the Mulswitch or disassemble it as this will
invalidate the guarantee.

The female F connectors on this unit were designed for use with '100' type
coaxial cable with a centre core diameter of 1mm². When using larger CT125
or CT167 cables, you must ensure that suitable F connectors with reducing
pins are used otherwise damage to the unit will occur which will invalidate the
guarantee.

Do not over ghten the F connectors (nger ght only).

GUARANTEE

All Whyte products are guaranteed for a period of 4 years from the date of
purchase against defects. Within this guarantee period, Whyte Technologies will
repair or replace the faulty product. In the unlikely event, please return any faulty
products to your dealer.

www.whytetechnologies.com

4

www.whytetechnologies.com

5

Whyte Series D is a range of advanced Cascadable Hybrid dSCR Mulswitches.
Seamless integraon with convenonal IRS Systems due to extremely low power
consumpon, low loss passive trunks and high gain TERR, make the new Series
D range from Whyte the most versale and easy to install dSCR Mulswitch
range available.

The Series D range can be directly conjoined with Series 5 convenonal
Mulswitches using the supplied F type couplers to seamlessly create Hybrid
IRS Systems.

Use Series 5 Launch Ampliers, Taps, Spliers and Power Supply Units to create
large scale dSCR only or Hybrid IRS Systems.

Each Subscriber Output provides Satellite (SkyQ dSCR & Legacy), TV and
Radio. Satellite subscriber signal levels in both Legacy and dSCR mode are
automacally set to 85dBμV (self-commissioning/AGC). Dscr and Legacy mode
is automacally detected and switched over on a per-subscriber port basis.

Terrestrial signal levels are controlled via a manual Gain Control knob and a
selectable Protean Tap which permits a wide range of TERR input signal levels
ranging from 50 to 108dBμV.

The recepon of 2 satellites can easily be achieved by ulising 2 Wideband
LNB’s and switching the unit to Wideband LNB mode.

The unit can be powered directly via the DC input port or be remotely powered
via the trunk lines.

GENERAL DESCRIPTION

1. Inputs Satellite

2. Input Terrestrial

3. Corner Mounng Brackets

4. LNB Selector Switch

5. Subscriber (REC) Outputs

6. Subscriber Output Status Indicator

7. Trunk Output SAT

8. Trunk Output TERR

9. TERR Protean Tap

10. Auxiliary DC Input

11. TERR Gain Control

12. TERR 12V DC Switch

13. Earth Terminal

14. Earth Terminal Bar

PRODUCT DESCRIPTION

The Guarantee will be deemed as void if the serial number on the product
is removed, damaged or illegible. The Guarantee excludes defects caused by
incorrect use, accidental damage, disassembly, water/re/lightning damage or
lack of venlaon.