Whyte Technologies WS92-05 Instruction Manual

WS92-05

9 Wire Splitter

Instruction Manual

www.whytetechnologies.com

Whyte

Model: WS92-05

General Description:

The Whyte™ Series 9 Splitter is a 9 Wire passive Splitter, which is designed to be used
with the Whyte™ Series 9 IRS Multiswitch range.

Technical Description:

The Whyte™ Series 9 Splitter is DC passing through all SAT Inputs and Outputs.
Whilst the WS92-05 Splitter does not require power to function (passive device), it
has an Auxiliary 18V Input, which enables a Whyte™ Power Supply Unit to be
connected thus serving as a convenient DC injector. The Auxiliary Input injects 18V
DC on to the HH and HL trunk lines upwards and downwards.
A Green LED indicates the presence of power on the HL and HH Trunk Lines.
The Whyte™ Series 9 range is compact due to the zig-zag layout of the Input and
Output Terminals. Therefore, an F Connector Tool (F Connector Screwdriver) should
be used to connect the input and output cables. Do not over tighten the F connectors
(finger tight only). Each Series 9 Splitter comes complete with 9 F Type Couplers to
enable quick and easy interconnection to Series 9 Multiswitches and Amplifiers.

Safety:

Whyte™ Series 9 Splitters are intended for indoor use only. Do not install the Splitters
in damp, humid, hot or dusty areas.
Always earth bond the Splitter using the Earth Bonding Lug to a suitable Earth
Bonding Point, using min 4mm² diameter Earth Cable.
Do not remove the cover of the Splitter or disassemble it, as this will invalidate the
guarantee.

Guarantee:

All Whyte products are guaranteed for a period of 24 months from the date of
purchase.

9 Wire Splitter

Whyte