Whyte bikes ES-140 SCR, E-900, E-800, EC-7 coniston men's, EC-7 coniston women's Supplementary Service Manual
...
E-bike Range
eS-140 SCR
e-900
e-800
eC-7 Coniston Men’s & Coniston Women’s
eR-7 Clifton & Highgate Compact
Supplementary Service Manual
2019 Edition 1
Page 2
2019 Edition 1
Page 3 2019 Edition 1
Table of Contents
1.0 Introduction
2.0 Geometry:
2.1: eS-140 SCR
2.2: e-900
2.3: e-800
2.4: Coniston Men’s
2.5: Coniston Women’s
2.6: Clifton
2.7: Highgate Compact
3.0 Preparations for riding:
3.1 Making Adjustments
3.2 Whyte Getta-Grip Seat Clamp (e-800 only)
3.3 Whyte Inter-Grip Seat Clamp (eS-140 &
e-900 only)
3.4 Set up of Fork
3.5 Set up of Rear Damper (eS-140 only)
3.6 Battery maintenance
4.0 Safety
5.0 Lubrication:
5.1 Whyte Getta Grip Seat Clamp (e-800 only)
5.1.1 Bolt-Up Style
5.1.2 Quick Release Style
5.2 Whyte Inter-Grip Seat Clamp (eS-140 & e-
900
only)
5.3 General Lubrication
6.0 Servicing the Rear Suspension (eS-140 only)
6.1 Chain-stay removal & refit.
7.0 Torque Settings
8.0 Owners’ Notes.
Page 4
2019 Edition 1
WHYTE Service Manual
1.0: INTRODUCTION
Thanks for choosing to purchase this Whyte product. We hope you will enjoy all the benefits its advanced design and engineering will bring to your riding experience.
This particular range of Electric bikes are fitted with electric pedal assistance, which depends upon how much force you will exert on the pedals. The following specific components are what makes these bikes different from a conventional pedal cycle:
• A battery pack fitted above or inside the downtube.
• An electric motor fitted to the bottom-bracket, output power of up to 250 Watts
maximum.
• A controlling system fitted to the handlebars.
This manual will guide you through the set-up, safety and maintenance procedures that
are specific to your Whyte bike. For other more general information, we strongly advise
that you also read thoroughly the General Instruction Manual that is also supplied with
your new bike.
Also, please note that the specification of all the components that are fitted to your bike as
standard may be obtained from the Whyte Bikes Brochure or alternatively from the Whyte
Bikes website www.whyte.bike.co.uk
Please remember, if you are in any doubt about your ability to safely service or repair your
Whyte bike, do not ride it and instead arrange for a professional bicycle mechanic at your
local Whyte dealer to do the job correctly.
Bundled with this manual, are the respective manufacturers instructions and manuals for
the branded parts that are fitted to your Whyte bike. Please take time to study all the relevant instruction manuals to ensure you have a continually safe and well set-up bike before
every ride, and to help you build up a relationship of knowledge between you and your
Whyte Dealer.
Happy and safe riding,
July 2017.
Page 5 2019 Edition 1
WHYTE Service Manual
2.0: GEOMETRY
Fig.1:
Geometry
2.01: WHYTE eS-140 SCR
Frame Size X Small Medium Large
Head Angle A 66.0° 66.0° 66.0°
Seat Angle** B 74.8° 75.0° 75.2°
Top Tube
C
600mm 620mm 641mm
BB Height* D 320mm 320mm 320mm
Stand Over E 792mm 776mm 795mm
Wheel Base F 1191mm 1211mm 1229mm
Chain Stay G 435mm 435mm 435mm
Seat Post Ø H 30.9mm 30.9mm 30.9mm
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
** Effective seat angle, from wheel centres horizontal to line from BB to seat post axis @ top of saddle.
** BB height with Ø721mm tyres fitted (27.5”x 2.4” / 61-584)
Page 6
2019 Edition 1
WHYTE Service Manual
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
*BB height with Ø717mm tyres fitted (27.5” x 2.6” / 65-584)
2.03: WHYTE e-800
2.02: WHYTE e-900
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
*BB height with Ø717mm tyres fitted (27.5” x 2.75” / 70-584)
Frame Size X Small Medium Large
Head Angle A
65° 65° 65°
Seat Angle B
74.0° 74.0° 74.0°
Top Tube C
580mm 627mm 645mm
BB Height* D
304.0mm 304.0mm 304.0mm
Stand Over E
800mm 820mm 813mm
Wheel Base F
1177mm 1197mm 1217mm
Chain Stay G
444mm 444mm 444mm
Seat Post Ø H
30.9mm 30.9mm 30.9mm
Extra-Large
65°
74.0°
664mm
304.0mm
839mm
1237mm
444mm
30.9mm
Frame Size X Small Medium Large
Head Angle A
66.5° 66.5° 66.5°
Seat Angle B
74° 74° 74°
Top Tube
C
580mm 600m 620mm
BB Height* D
300mm 300mm 300mm
Stand Over E
792mm 807mm 832mm
Wheel Base F
1131mm 1151mm 1171mm
Chain Stay G
444mm 444mm 444mm
Seat Post Ø H
30.9mm 30.9mm 30.9mm
Extra-Large
66.5°
74°
638mm
300mm
852mm
1191mm
444mm
30.9mm
Loading...