Whyte bikes 29 CS, 405, 629, 29 C Team, 529 Supplementary Service Manual

MTB Hardtail Range

29 CS & 29 C Team

405

529 & 629

603, 604 & 605

801, 802, 805 & 806

901, 905 & 909

Supplementary Service Manual

2016 Edition 1

2016 Edition 1

Page 3

Table of Contents

1.0 Introduction

2.0 Geometry:

2.1: 29 CS & 29 C Team

2.2: 405

2.3: 529 & 629

2.4: 603, 605, 801 & 805

2.5: 604, 802 & 806

2.6: 901

2.7: 905 & 909

3.0 Preparations for riding:

3.1 Making Adjustments

3.2 Getta-Grip Seat Clamp

3.3 Set up of Fork

3.4 Suspension Tuning Log

4.0 Safety.

5.0 Lubrication:

5.1 Whyte Getta-Grip Seat Clamp

5.1.1: Bolt Up

5.1.2: QR Style

5.2 Whyte Inter-grip Seat Clamp

5.3 General Whyte Lubrication

6.0 Torque Settings:
Whyte Whyte Rear Derailleur Hanger

7.0 Notes.

2016 Edition 1

Page 4

WHYTE Service Manual

1.0: INTRODUCTION

Thanks for choosing to purchase this Whyte product. We hope you will enjoy all the bene­fits its advanced design and engineering will bring to your riding experience.

This manual will guide you through the set-up, safety and maintenance procedures that
are specific to your Whyte bike. For other more general information, we strongly advise
that you also read thoroughly the General Instruction Manual that is also supplied with
your new bike.

Also, please note that the specification of all the components that are fitted to your bike as
standard may be obtained from the Whyte Bikes Brochure or alternatively from the Whyte
Bikes website www.whytebikes.co.uk

Please remember, if you are in any doubt about your ability to safely service or repair your
Whyte bike, do not ride it and instead arrange for a professional bicycle mechanic at your
local Whyte dealer to do the job correctly.

Bundled with this manual, are the respective manufacturers instructions and manuals for
the branded parts that are fitted to your Whyte bike. Please take time to study all the rele­vant instruction manuals to ensure you have a continually safe and well set-up bike before
every ride, and to help you build up a relationship of knowledge between you and your
Whyte Dealer.

Happy and safe riding,

Whyte design team. May 2015.

2016 Edition 1

Page 5

WHYTE Service Manual

2.0: GEOMETRY

2.1: WHYTE 29 CS & 29 C Team

Fig.1:
Geometry

Frame Size

Small Medium Large

Head Angle 69.3° 69.3° 69.3°

Seat Angle 73.0° 73.0° 73.0°

Top Tube 612.2mm 627.0mm 640.8mm

BB Height* 305mm 305mm 305mm

Stand Over 790mm 810mm 845mm

Wheel Base 1117.3mm 1127.9mm 1144.9mm

Chain Stay 437.5mm 437.5mm 437.5mm

Seat Post 30.9mm 30.9mm 30.9mm

X

A

B

C

D

E

F

G

H

Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø738mm tyres fitted (2.1” / 52-622)