Whyte bikes 20C, 20C S, 29C, 29C S, 20C Team Supplementary Service Manual
...
20C, 20C S & 20C Team
29C, 29C S & 29C Team
529, 629 & 729
801, 802, 805, 810 & 810 Ladies
901 & 905
929
Supplementary Service Manual
Edition 1: February 2012
2010 Edition 1 Page 3
Table of Contents
1.0 Introduction
2.0 Geometry:
2.1: Whyte 20C, 20C S & 20C Team
2.2: Whyte 29C, 29C S & 29C Team
2.3: Whyte 529, 629 & 729
2.4: Whyte 801, 802, 805 & 810
2.5: Whyte 810 Ladies
2.6: Whyte 901 & 905
2.7: Whyte 929
3.0 Preparations for riding:
3.1 Making Adjustments
3.2 Getta-Grip Seat Clamp
3.3 Set up of Fork
3.4 Suspension Tuning Log
3.5 Whyte Adjustable Dropout System
3.6 Adjusting the Dropout System
4.0 Safety.
5.0 Lubrication:
5.1 Getta-Grip Seat Clamp
5.1.1: Bolt Up
5.1.2: QR Style
5.2 Whyte Adjustable Dropout System
5.3 General Whyte Hardtail Lubrication
6.0 Torque Settings:
Whyte Adjustable Dropout System & Whyte Rear Derailleur Hanger
7.0 Notes.
2010 Edition 1 Page 4
WHYTE Service Manual
1.0: INTRODUCTION
Thanks for choosing to purchase this Whyte product. We hope you will enjoy all the benefits its advanced design and engineering will bring to your riding experience.
This manual will guide you through the set-up, safety and maintenance procedures that
are specific to your Whyte bike. For other more general information, we strongly advise
that you also read thoroughly the General Instruction Manual that is also supplied with
your new bike.
Also, please note that the specification of all the components that are fitted to your bike as
standard may be obtained from the Whyte Bikes Brochure or alternatively from the Whyte
Bikes website www.whytebikes.co.uk
Please remember, if you are in any doubt about your ability to safely service or repair your
Whyte bike, do not ride it and instead arrange for a professional bicycle mechanic at your
local Whyte dealer to do the job correctly.
Bundled with this manual, are the respective manufacturers instructions and manuals for
the branded parts that are fitted to your Whyte bike. Please take time to study all the relevant instruction manuals to ensure you have a continually safe and well set-up bike before
every ride, and to help you build up a relationship of knowledge between you and your
Whyte Dealer.
Happy and safe riding,
Whyte design team. February 2012.
2010 Edition 1 Page 5
WHYTE Service Manual
2.0: GEOMETRY
Frame Size
Small Medium Large
Head Angle 68.5° 68.5° 68.5°
Seat Angle 74.0° 73.5° 73.5°
Top Tube 560.0mm 584.6mm 603.6mm
BB Height* 300.0mm 300.0mm 300.0mm
Stand Over 750mm 755mm 775mm
Wheel Base 1073.6mm 1093.6mm 1113.6mm
Chain Stay 425mm 425mm 425mm
Seat Post 30.9mm 30.9mm 30.9mm
X
A
B
C
D
E
F
G
H
2.1: WHYTE 20C, 20C S & 20C Team
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø660mm tyres fitted (1.9” / 47-559)
Fig.1:
Geometry
2010 Edition 1 Page 6
WHYTE Service Manual
Frame Size
Medium Large Extra - Large
Head Angle 69.3° 69.3° 69.3°
Seat Angle 73.0° 73.0° 73.0°
Top Tube 612.2mm 627.0mm 640.8mm
BB Height* 305mm 305mm 305mm
Stand Over 860mm 880mm 715mm
Wheel Base 1117.3mm 1127.9mm 1144.9mm
Chain Stay 437.5mm 437.5mm 437.5mm
Seat Post 30.9mm 30.9mm 30.9mm
X
A
B
C
D
E
F
G
H
2.2.2: WHYTE 29C, 29C S & 29C Team
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø738mm tyres fitted (2.1” / 52-622)
Frame Size
Medium Large Extra - Large
Head Angle 68.5° 68.5° 68.5°
Seat Angle 73.0° 73.0° 73.0°
Top Tube 600.2mm 614.8mm 629.4mm
BB Height* 305mm 305mm 305mm
Stand Over 809mm 827mm 852mm
Wheel Base 1113.4mm 1128.4mm 1143.4mm
Chain Stay 440.0mm 440.0mm 440.0mm
Seat Post 30.9mm 30.9mm 30.9mm
X
A
B
C
D
E
F
G
H
2.2.3: WHYTE 529, 629 & 729
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø738mm tyres fitted (2.1” / 52-622)
Loading...