Whynter KS-1200 User Manual

WHYNTER Digital Kitchen Scale –

Stainless Steel

MODEL: KS-1200

Please read this instruction booklet completely before operating.

SPECIFICATIONS

 Equipped with a high precision strain g auge sensor system
 Stainless steel scale body
 Capacity: 3k g x 1g
 Auto zero resetting
 Low power / Over load indicator
 Backlight / Tare / Time function
 Two weight units option (g/oz)
 Power: 1 x 9V alkaline battery

POWER SUPPLY

1 x 9V alkaline battery not included.
When the LCD indicates “ , please open the battery cover at the bottom of the unit and
replace the battery with a new one.

OPERATION

STEP1: Press the “ON/TARE” button, the scale will display zero after “HELO” appear on
the LCD display. The scale is ready for weighing.

STEP2: Put food/ ingredient into the container, the weight will appear on the display.

STEP3: After weighing, press the “MODE” button, the system will return to clock mode.

TARE FUNCTION

STEP1: In the weight mode, put the container on the scale, the scale will display the
weight of the container.

STEP2: Press the “ON/TARE” button, the LCD will display zero. Then put the food/
ingredient into the container, the scale will display the weight of the item in the container.

BACKLIGHT

Press the “ON/TARE” button to switch on the backlight and the weighing mode. Press the
“MODE” button to switch off the backlight and return to clock mode.

TIME SETTING

Press the “MODE” button for a few seconds to turn on the time setting function.

Minute will flash on the display.

Press the “UNIT” button to setup the minute.