ITEM
NO.: T-3654
XBT & T
-
230S OR T-236S
OR T-230T
REVISED SEP 10
, 2014
Printed in Vietnam
ASSEMBLY INSTRUCTIONS
T-3654XBT /T-230S T-3654XBT /T-236S
T-3654XBT /T-230T T-3654XBT /T-236T
DESCRIPTION : 54X36X54 BUTTERFLY GATHERING TABLE
ITEM NO : T-3654XBT AND T-230S OR T-236S OR T-230T OR T-236T
(PACKED IN SEPARATE BOX)
OR T-236T (PACKED IN SEPARATE BOX)
- 1 -
ITEM
NO.: T-3654
XBT & T
-
230S OR T-236S
OR T-230T
REVISED SEP 10
, 2014
Printed in Vietnam
BEFORE ASSEMB
LY
PART
LIST
TOP
T-3654XBT
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
table. Protect the surface of the table with cloth if you are using any product with rubber feet or base.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch
A Top 1
OR T-236T (PACKED IN SEPARATE BOX)
- 2 -
ITEM
NO.: T-3654
XBT & T
-
230S OR T-236S
OR T-230T
REVISED SEP 10
, 2014
Printed in Vietnam
AND
PART LIST
T-230S OR T
-
236S OR
T-
230T
OR
T-2
36T
HARDWARE LIST
NO Description
Qty Sketch
NO
Description
Qty Sketch
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
B
B
Leg
(T-230S)
Leg
(T-236S)
4
4
B
B
Leg
(T-230T)
Leg
(T-236T)
4
4
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
Flat washer
1
(8.5x19mm)
Hexagon nut
3
(M8x13mm)
NOTE: HARDWARE IS PACKED IN CARTON OF LEGS T-230S OR T-236S OR T-230T OR T-236T
OR T-236T (PACKED IN SEPARATE BOX)
8
8
Lock washer
2
(8.5x13mm)
4
Wrench
(13mm)
8
1
- 3 -
ITEM
NO.: T-3654
XBT & T
-
230S OR T-236S
OR T-230T
REVISED SEP 10
, 2014
Printed in Vietnam
STEP 1
STEP 2
Attach the legs (B) to the Top (A) with washers (2), and (3), and nuts (1), as shown below . Tighten with
the wrench (4).
Unlock the table top from both sides underneath of the top as shown below.
Pull the 2 parts of the table top apart.
OR T-236T (PACKED IN SEPARATE BOX)
- 4 -
ITEM
NO.: T-3654
XBT & T
-
230S OR T-236S
OR T-230T
REVISED SEP 10
, 2014
Printed in Vietnam
STEP 3
Lift and open the butterfly leaf in the center of the open table top. Push the table top closed.
Lock the mechanism underneath the table top as shown below.
OR T-236T (PACKED IN SEPARATE BOX)
- 5 -
Loading...