Page 1
Page 2
Page 3
HRF-285
3001FF
HRF-295
3
WW-CO5050FF
2
Page 4
3
Page 5
Instruction for use Combined Fridge & Freezer
The user instructions apply to several models, for
this reason there may be some differences in the
details given, according to the type of the appliance.
1 Protecting the environment / advice for disposal
Packing
serves to protect the appliance during transportation and
recyclable materials have been used for packaging.
Corrugated board/cardboard (mainly from waste paper)
■ shaped parts in PS (foamed CFC-free polystyrene)
■ foils and bags in PE (polyethylene)
■ strapping tapes in PP (polypropylene)
Please hand over all packaging to the nearest official
collection point, so that all the different materials can
be re-used or recycled as far as possible and any
illegal depositing of such materials is thus avoided.
2 Deciding where to locate your appliance
In order to avoid any damage or injury to persons or
things, the appliance should be unpacked by two people
and placed in the chosen location
Before positioning it, check that your new appliance
has no visible outer damage.
On no account should you start up your appliance if it is
damaged.
Check the appliance carefully for:
Damage to the packaging which might indicate that
the appliance has been mishandled during
transportation.
Damage to the outer casing
Any visible damage to the cable / plug
If in any doubt let the customer service department
check the appliance.
It must at all costs be avoided, that any environmentally
damaging refrigerant leaks out by starting up the
appliance.
3 Installing your appliance
a) Unpack the fridge / freezer.
b) In order not to unnecessarily waste raw materials, the
handles (requiring smaller packaging) have not been
mounted onto the separate parts of the appliance.
Mount the door handles and at the same time any
other enclosed parts according to the relevant
instructions enclosed separately.
c) Remove any objects from inside the appliance.
d) Carefully remove all film and adhesive tape
from the casing
from the door
e) Remove any polystyrene pieces from around the
compressor (if present).
f) Remove all documents and accessories from inside
the appliance.
g) Clean the inside of the appliance with lukewarm
water and vinegar and dry it thoroughly with a soft
cloth.
Do not use washing liquids, sharp or abrasive
household products or any other cleaning agents
containing soda.
Make sure that the pipes for the circulation of the
refrigerant are not damaged in any way during
installation of the appliance.
The appliance must only be used for the purpose for
which it is intended.
The appliance must be placed on a firm, level
surface. This is the only way to ensure that the
refrigerant can circulate freely and thus ensure that
your appliance will work efficiently.
If possible, place your appliance in a cool, well
aired, dry room.
Do not place your appliance in direct sunlight, nor in a
room at high temperature.
Do not place your appliance in the vicinity of any
sources of direct heat such as heating, ovens, cooking
stove etc. (This would mean the compressor would
have to work harder and as a result the power
consumption would be considerably higher).
If installation near a direct heat source cannot be
avoided, we recommend fitting a suitable insulation plate
between the appliance and the heat source (do not use
asbestos), or at least the following minimum distances
must be observed:
from a gas or electric cooker 3 cm
from a radiator or oven etc. 30 cm
from another refrigerating appliance 2 cm
Do not place any appliances, such as
microwaves, toasters etc. which give off heat on
the appliance.
Never obstruct the ventilation grille.
Always pull out the plug itself and never pull the cable
when cutting the appliance off from the mains supply.
WARNING !
Leave the appliance standing in its final position for
at least 2 hours before switching it on, so that the
circulation of the refrigerant stabilises and no
operating problems occur.
Before connecting up the appliance, make sure that
it is absolutely dry inside - especially in the corners.
Danger warnings
Depending on its composition, the refrigerant can be
easily inflammable. The refrigerant circuit has been
hermetically sealed and has been tested many times for
possible leaks.
Any inexpert interference might well create a fire hazard.
Make sure nothing mechanically effects the circulation of
the refrigerant, nor, in particular, the accessible parts
around the compressor.
Only expert professional personnel should intervene
on the refrigerating system.
Warning!
Any refrigerant spilling out can injure your eyes.
In the event of eye contact with the refrigerant, wash your
eyes instantly under plenty of running water and
call/consult a doctor (an eye specialist) immediately.
The appliance, according to its climate category, is meant
for use at certain room temperatures.
These temperatures should not be exceeded! The
climate category for your particular appliance is marked
on the rating plate. The categories are:
name of climate
category
suitable
room temperatures
SN
N
ST
T
+ 10° C to + 32°C
+ 16° C to + 32°C
+ 18° C to + 38° C
+ 18° C to + 43° C
4
Page 6
5
Page 7
6
Page 8
Instruction for use Combined Fridge & Freezer
immediately (see “What to do when.....“ at the back
of the user manual).
Never use a screwdriver or any other sharp-edged
metal tool to remove the layers of ice. The inside
walls are very delicate and can be easily damaged by
sharp edges. Use only plastic or wooden scrapers
with no sharp edges.
9 Cleaning and maintenance
As a firm rule, unplug the power plug or switch off at
the mains.
For the upkeep of the external appearance of your fridge
/ freezer, clean the outside every now and again with
furniture polish or with an enamel protecting product
(never, on any account use it inside). Clean the door seal
with warm water now and again but do not use any
cleaning products.
Clean your appliance regularly.
The various parts inside the fridge / freezer are
generally not suitable for dishwashers. These should
be washed by hand with warm water and a little
washing-up liquid. Never use the cleaning agent neat
and on no account use any abrasive or acid, i.e.
chemical cleaning products. A general all purpose pH
neutral cleaning agent is recommended.
■ The rating plate inside or outside your appliance
should not be damaged and should never be
removed - this is essential for servicing. Make sure,
when cleaning, that no water runs onto any electrical
parts inside the appliance.
■ If there is a heat exchanger -called condenser- on the
back of your fridge / freezer, this should be cleaned
regularly. Dust and dirt impede the release of heat
from the inside and considerably increase energy
consumption. For best results, use a soft brush or a
duster to remove dust from the condenser.
Special tips for cleaning the fridge
Clean the drain hole in the fridge from time to time with,
for example, cotton buds, in order to keep it clear.
Switching off the appliance
If your appliance is going to be switched off for longer
periods (such as during holidays), it should be left open
to prevent odours from building up inside. If your
appliance has a lock, set the lock in the “closed” position
with the doors open and keep the key well away from
small children to prevent accidents.
Ice and frost layers which build up to a certain thickness
on the inside walls, act as insulation and prevent the
dispersion of the coldness. These must be removed from
time to time. To remove the layers of ice from the inside
walls, use a plastic or wood scraper with no sharp edges.
When doing this, remove the drawers and lay a cloth on
the bottom of the appliance to catch the ice as it is
scraped off so that it can be easily removed.
The method least likely to damage your appliance when
removing the layers of ice is to defrost it.
Defrosting
In normal circumstances (opening the freezer 4 – 5 times
a day) the freezer compartment should be defrosted once
or twice a year (more often in other circumstances).
The fridge compartment is defrosted automatically.
Danger warnings
Never use electrical appliances to defrost your appliance,
such as a hair dryer, fan heater, dehumidifiers, de-icing
sprays or anything with a naked flame (e.g. candles).
The plastic inside of your appliance could melt and the
escaping gas or foam could be ignited by sparks or by
the naked flame.
On no account should a steam cleaning device be
used to defrost the layers of ice in the appliance
(great risk of an electric shock).
Proceed as follows to defrost your appliance:
1. Provide a suitable non-metallic container (a plastic
container or wash-basket).
2. Make absolutely sure that you remove the plug
from the power socket.
3. Dry your hands thoroughly to prevent skin damage
from contact with ice
(it is advisable to use gloves).
4. Remove all frozen food from the freezer and roll it
firmly in newspaper place it in the container already
prepared and place the container in a cool, dry room.
5. Cover the container all around with a thick blanket.
6. Remove the drawers by pulling them as far out as
possible and then raising them slightly.
7. As described previously, scrape the thickest ice
carefully from inside the freezer and put it in the
kitchen sink.
8. If your appliance is equipped with a drip duct at the
bottom of the appliance, pull it out and place a bowl to
catch the dripping water underneath it.
9. If necessary, speed up defrosting by placing a large
bowl of warm (not too hot) water on the bottom of the
appliance and close the door.
10. If your appliance is not equipped with a drip duct,
place an absorbent cloth underneath the front of the
appliance and wipe up the defrosting water with a
sponge.
11. Thoroughly clean the inside. Wipe it out with warm
water and a little vinegar and then rinse it out with
clear water.
12. Dry it thoroughly with a soft cloth and air it for 3-4
minutes.
13. Close the door and plug the appliance back in.
14. Reset the temperature dial to the maximum setting.
(if your appliance is equipped with green and red
pilot lights, these will come on) and if the SUPER
FREEZE SWITCH is provided, switch it on (the
yellow light will also come on).
15. Now refill the drawers with the frozen food - the oldest
items at the top.
To prevent the frozen food from defrosting, carry out the
steps described above within two hours at the most.
16. When the red pilot light goes off, reset the
temperature dial to a medium setting.
If provided, switch off the SUPER FREEZE SWITCH
after about 12, but no later than 24 hours ( the yellow
light will go off).
10 Using the fridge
Switch on / off and selecting the temperature
Temperature dial (thermostat)
The temperature dial switches the appliance on and off
and sets the cooling temperature.
Switch on:
Turn the temperature dial to the right. Your fridge has
been switched on. The light in the fridge compartment
comes on. The compressor runs until the set temperature
has been reached.
Temperature settings:
Turn dial left to lowest setting = slight cooling
7
Page 9
8
Page 10
9
Page 11
Instruction for use Combined Fridge & Freezer
2-3 4 6 8 10-12
Mincemeat > Polyethylene freezer bag >
z
Sausages > Polyethylene freezer bag >
z
Small fish > Polyethylene freezer bag >
z
Heart / liver > Polyethylene freezer bag >
z
Ice cream > Plastic container >
z
Fruit > Plastic container >
z
Cheese > Polyethylene freezer bag >
z
Bread > Polyethylene freezer bag >
z
Large fish > Polyethylene freezer bag >
z
Cake / biscuits > Glass container >
z
Pork > Aluminium foil >
z
Beef > Aluminium foil >
z
Rabbit > Aluminium foil >
z
Lamb > Aluminium foil >
z
Mushrooms > Polyethylene freezer bag >
z
Asparagus > Polyethylene freezer bag >
z
Vegetables (cut) > Polyethylene freezer bag >
z
Strawberries > Polyethylene freezer bag >
z
Flans > Aluminium foil >
z
Chicken > Aluminium foil >
z
Turkey > Aluminium foil >
z
Duck > Aluminium foil >
z
Goose > Aluminium foil >
z
Cauliflower > Polyethylene freezer bag >
z
Beans > Polyethylene freezer bag >
z
Pepperoni > Polyethylene freezer bag >
z
Preserves > Glass container >
z
Preserved fruit > Glass container >
z
Ice lollies > Aluminium foil >
z
approx. storage time in months
English
Fresh food Suitable packaging
STORAGE TABLE
GB
10
Page 12
Instruction for use Combined Fridge & Freezer
11
1
2
3
Page 13
Instruction for use Combined Fridge & Freezer
English
fiCONS 05/00
Control Panel
(vary depending on model /type)
You will f ind variants of the control panel fascias and functi on of the indi vi dual operat i ng elements for your appliance
on the following, or a separate sheet
Components of the appliance
(differ, depending on model / type)
*Ventilation grille
*W orkt op/ Cover
*Control panel
Butter/ Chees e Compartment
Interior light
* and thermostat knob
Shelf
Defrost drainage channel
* Glass / plexiglass shelf
Salad drawer/s
Door t ray
Bottle rack
Ic e cube- / Freeze drawer f or f ruts
Freezer/St orage Compart ment
Door s eal
*Defrost wat er coll ecti on tray
(extractable)
*
depending on model
Lamp:
E 14 / 230V~50Hz, Max. 15 W
To remove bulb cover
1
Press bulb cover in the direction
indicated by the arrows 1
On s ome models t he lamp c over is open
2
Pull out sideways
at t he f ront, enabling the lamp to be changed
without removing the cover. Remove lamp by unscrewing
(c ounter cl ockwis e)
3
5
6
2
4
1
9
10
7
8
11
12
13
14
15
FREEZE
R
COOLER
- 18 + 05
All drawings are for illustration only. The equipment of your appl i ance can
dif fer from t hat in the above and following drawings.
GB
7
9
5
6
12
13
13
13
8
3
10
11
2
4
1
14
15
5
2
1
3
12
Page 14
A Refrigerator thermostat for temperature setting E Power indicator (green)
B Freezer thermostat for temperature setting F Freezer temperature indicators (orange)
C Buzzer release key G Freezer over temperature indicator (red) ALARM
D Fast freeze key H Freezer fast freeze indicator (yellow)
Note: Thermostat (A & B) on position MAX. = coldest temperature
Thermostat (A & B) on position MIN. = warmest temperature / Thermostat OFF
1.
2.
3.
D
MAX.
MIN.
MAX.
MIN.
A
LARM
SUPER FREEZE
ON
-15 -18 -21 -25 -32
°
E
A
F
G
C
H
B
4.
subject to technical changes
Connect your appliance to the power socket. The power indicator E lights up
Use a coin for temperature adjustment
Set the thermostat A first to position MAX. to activate the Refrigerator
After 24 hours you may set the thermostat to a middle position for normal operation
.
In summertime please set a little colder
Set the thermostat B first to position MAX. to activate the Freezer
The red ALARM indicator G lights up and the alarm buzzer sounds.
You may release the buzzer by pushing the buzzer release key C
The red ALARM indicator G extinguishes when a temperature of -15 to -18°C inside the freezer is reached.
(Observe the orange temperature indicators F )
Now reactivate the alarm buzzer by bushing the key D
Activate the fast freeze key D. The yellow indicator H lights up
The fast freeze function should be deactivated be bushing the key D after 24 hour or latest when the
temperature indicator F (-32°C) lights up.
Now you may set the thermostat B to a middle temperature for normal operating.
In summertime please set a little colder.
Repeat operating 3. and 4. always after defrosting the freezer
13
Page 15
Loading...