OPERATING INSTRUCTIONS
ENJUAGUEEXTRA
Tibio
Ffio
Before Operating Your Washer
Read your washer Owner's Guide. Ithasimportant
safety and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the iMPORTANT
SAFETY INSTRUCTIONS in your washer Owner's
Guide before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's Guide.
It explains these operating steps in detail.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stainsand heavy soil.
4. Add the measured amount of detergent to
wash tub.
5. Ifdesired,add liquid bleach to bleach dispenser.
6. Add laundry load to wash tub.
7. If desired, add liquid fabric softener to fabric
softener dispenser.
8. Setcycleselectorandwashercontrolsaccording
to type, size, and soil level of each load.
9. Close lid and pull cycle selector knob to start
washer. The washer will not fill, agitate or spin
with the lid open.
10. Remove items at end of cycle. Wait about 2
minutes for safety lid lock to release.
Cycle Selection
Always follow instructions on fabric care labels.
The Regular, Planchado Perrnanente (Permanent
Press), and Delicado (Delicate) cycles provide a
spray rinse during the first spin, followed by a
deep rinse and final spin.
Regular Cycle
Provides Lip to 15 minutes of wash agitation for
most fabrics.
Enjuague Rapido - Provides up to 12 minutes of
spin for maximum removal of water. This conserves
energy by reducing drying time.
REMOJAR Y
PR[-LAVAR
o
ENJUAGUE
o
REGULAR
o
X[ A
0
DELICADO
O PLANCHADO
PLANCHADO F_RMANENTE PERMANENTE
PR£*LAVAR
Enjuague Extra (Extra Rinse) Cycle
Use Enjuague Extra to remove excess dirt and
detergent from heavily soiled loads. Enjuague
Extra provides 3 minutes of rinse agitation, then a
9 minute spin.
Planchado Permanente
(Permanent Press) Cycle
Provides up to 12 minutes of wash agitation for
cottonsand blends with a no-iron finish.
• Select the Planchado Permanente Pre-Lavar
(Perm Press Prewash) setting to help loosen
soil and remove stains before washing. Add
recommended detergent and other laundry
products desired to tub. Add load. Select a
cold water rinse and appropriate load size.
Load will agitate 4 minutes, drain and spin.
Follow with a complete Planchado Permanente
cycle.
Delicado (Delicate) Cycle
Provides 6 minutes of wash agitation for the
gentle care of knit and delicate items.
Printed in U.S.A. P/N134325400(0311)
Cycle Selection (continued)
Remojar y Pre-Lavar (Soak & Prewash) Cycle
Remojar (Soak)
• Use Remojar (Soak) to treat heavily soiled or
stained items. Remojar provides 3 minutes of
agitation and 12 minutes of soaking time. The
load then advances into the Pre-Lavar portion of
the cycle.
• Use the amount of detergent recommended for
a normal wash cycle. If desired, use bleach or a
soaking agent for colorfast items.
• The Remojar water temperature is the same as
the rinse water temperature selected.
• Follow Remojar with a complete wash cycle
using the normal amount of detergent.
Pre-Lavar (Prewash)
• Use Pre-Lavar (Prewash) when soaking is not
necessary. Pre-Lavar helps remove protein-based
stains such as milk, grass and blood. It also helps
loosen soils before washing. Pre-Lavar provides
3 minutes of wash agitation.
• Use the amount of detergent recommended for
a normal wash cycle.
• The Pre-Lavar water temperature is the same as
the wash water temperature selected. To avoid
setting protein stains, select cold water.
• Follow Pre-Lavar with a complete wash cycle
using the normal amount of detergent.
Controls
Always follow instructions on fabric care labels.
TEMPERATURA LAVAR/ENJUAGUR (WASH/RINSE
TEMPERATURE) sets water temperatures for
washing and rinsing. Select wash water
temperature according to fiber content, soil level
and type of detergent. A cold water rinse saves
energy and reduces wrinkling. The following
chart suggests wash/rinse temperatures for basic
fabric types.
Wash/Rinse
Fabric Type
Heavily soiled white/colorfast
cotton, perm press
Lightly soiled white/colorfast Warm/Cold
cotton, perm press Tibio/Frio
Noncolorfast fabrics, knits, Cold/Cold
delicates, hand washables Frio/Frio
Tama_o de la Carga (Load Size) sets the amount
of wash and rinse water for the wash load. Select
a water level appropriate for the load size. There
should be enough water for items to move freely.
• To increase water level after the wash cycle
begins, turn the Tamano de la Carga control to
Nueva Selection (Reset) and hold. When water
begins to enter the tub, turn the control to the
desired setting.
Temperature
Hot/Cold
Caliente/Frio
ENJUAGUE EXTRA (EXTRA RINSE) provides an
additional rinse at the end of the Regular cycle.
• Turn the Enjuague Extra control to SI(ON) to
automatically advance from the Regular cycle to the
Extra Rinse cycle.
• Turn the Enjuague Extra control to NO to conserve
water when an automatic extra rinse is not desired.
Energy Saving Tips
• Wash full loads. Oversize loads use extra energy.
Undersize loads waste energy.
• When small wash loads cannot be avoided, use
lower water levels.
• Select the appropriate cycle and time for each
load. Shorten wash times for lightly soiled loads.
• To reduce drying time, select a fast spin speed to
remove more water from heavy items such as
towels and jeans.
• Use warm water to wash most loads. Limit hot
water washes to heavily soiled and white loads.
Use cold water for lightly soiled items and
rinsing.
• Operate the washer in early morning and late
evening when utility demands are low.
• Follow proper laundry procedures to avoid
rewashing.
P/N 134325400(031 I)