1
WiFi PhoneREAD'R User Guide
1.- Introduction
2.- Charge the WiFi PhoneREAD'R
3.- Install App onto ipad/iphone/ipod Touch/Android phone
4.- Open/close the WiFi PhoneREAD'R
5.- Connect the WiFi PhoneREAD'R to ipad/iphone/ipod Touch/Android phone
6.- WiFi PhoneREAD'R use instruction
7.- Set the SSID and code of the WiFi PhoneREAD'R
8.- Download files from the WiFi PhoneREAD'R
9.- Upload files to the WiFi PhoneREAD'R
10.- Preview files on the WiFi PhoneREAD'R
11.- Factory reset
1.0- Introduction
<Items attached in package>
--- One WiFi PhoneREAD'R (host)
--- One USB charging line
--- One User Manual
<Factory set>
SSID: WiFi Storage*******
Code：88888888
Note: Factory has set a separated SSID for each WiFi PhoneREAD'R and you
can also reset SSID and code (please refer to Item 7)
Device
2
Device specification
Device size: length83MM*width50MM*thickness19.5MM
Capacity: 1,200mAh
Charging current: 800mAh
Input voltage: 5V
Transfer speed: 150Mbps
Transfer distance: 30 Yards
Micro power supply connector
2.0- Charge the WiFi PhoneREAD'R
Charge the WiFi PhoneREAD'R for 4 hours before use and 2 hours after use
when turned off.
Connect the WiFi PhoneREAD'R to computer USB connector or USB charger.
Charging
display light
Power switch
Micro USB charging
connector
Switch display
light (Blue)
Low voltage display
light (Red)
USB connector for card reader and
memory stick
SD card slot
3
The display shows a red light when charging. It shows a blue light when it is
fully charged. When the low power shows red light, it means the WiFi
PhoneREAD'R is in low power and needs charging immediately.
3.0-Install the WiFi PhoneREAD'R App onto Ipad/Iphone/Ipod Touch/
Android Phone
Please search “Wi-Fi media reader” in Apple App Store and install it
into ipad/iphone/ipod Touch
WiFi media reader
4.0- Open/Close the WiFi PhoneREAD'R
Switch display light
Keep lighting Open WIFI
Fast flashing In the data transmission
Normal
flashing
WIFI is ready, ipad/iphone/ipod Touch has been connected
Slow flashing
WIFI is ready, ipad/iphone/ipod Touch has not been
connected
Close Close or low power
4
5.0- Connect the WiFi PhoneREAD'R to Ipad/Iphone/Ipod Touch/Android
Phone
Open
setting. Start the WiFi PhoneREAD'R and please wait for 30 second
when
indicat
or
turns blue now the WiFi PhoneREAD'R is opening. The WiFi
PhoneREAD'R is ready when indicator turns normal flashing. Open your
WIFI in iphone/ipad and input code: 88888888 in your WiFi PhoneREAD'R SSID
5
6.0- WiFi PhoneREAD'R Instruction
The WiFi PhoneREAD'R App will not be updated regularly therefore using method
may have a few changes.
1.Interface
Files downloaded from Wi-Fi CARD
Pictures in gallery of the phone
Read files in SD/U disk
of WiFi PhoneREAD'R
via Wi-Fi
6
2.Preview
3.Download
1.Click“Edit”
button
3.Then click
“Download”
button again
2.Select
pictures or
files that
need
downloading
7
Software will
automatically
jump to a local
files
Select download
saving route. Ignore
it if there is none.
Click“Complete”
button to download
selected files
8
Downloaded pictures
can also be saved in
gallery for backup,
click“Edit”
button and select
pictures need backup
and then click
“Save to Gallery”
9
4.Upload
Upload, users can upload
p
ictures in iPhone/iPad to
SD/Udisk in the WiFi
PhoneREAD'R
10
5.Customize SSID and Code of the WiFi PhoneREAD'R
Select the route
of SD/U you want
to upload
Then click
“Completed”
button the
selected
pictures
will be
uploaded
Users can customize the name and
password of network. Restart the
hardware after setting.
1
1
Restore Factory Reset
Users need to use needle to press the “Reset” button and wait for 30 seconds when
the power is on if factory reset is needed. If the reset is succeeded, the power
indicator will be on 8 seconds and then slow flashing.
Loading...